User manual
Section 3: Operation
Mirage S+/HD/WU, Matrix S+/HD/WU, Christie HD/DS+/DW, DLV User Manual 3-31
020-100001-07 Rev. 1 (11-2009)
Figure 3.7. Adjusting Input Levels Using the Peak Detector
(RED EXAMPLE SHOWN)
Advanced Image Settings
—
SUBMENU
Use the Advanced Image Settings
submenu to make the adjustments
necessary for lesser-used but more
specialized applications on your
projector.
NOTE: 3D Source option is only
available for Mirage HD.
GAMMA TABLE: This control applies
a default video, graphics or simple gamma table or “curve” to your images,
controlling the intensity of mid-level colors and producing maximum contrast,
brightness and color performance. As shown at right, the graphics curve is a modified
power curve that will show more detail in darker areas of the projected content while
the video curve has a linear segment near black to compensate for increased black
levels typical of video signals. A simple gamma curve is a true power curve that does
not alter the contrast or the intensity of mid-level colors. Although the projector
automatically applies either the graphics or
video curve according to what type of
incoming signal is detected, in some cases you
may wish to override this default and use
graphics gamma for a video source or video
gamma for a graphics source. Alternatively, if
neither default is ideal, you may prefer to
apply the simple (non-optimized) gamma
curve or a user-defined custom gamma curve that has been created externally, named,
and downloaded to the projector (requires separate PC-based Arbitrary Gamma
and
KoRE Librarian
software applications). If any of these special user curves have been
installed, their names will appear in the Gamma Table pull-down list.
Keep in mind that any Gamma Table choice sets the related Gamma value (shown in
the Image Settings menu) to a 2.2 default, where it can be fine-tuned as desired.
Different values (1-3) here indicate that the original gamma table has been adjusted
with either the Gamma slide bar or direct key.
1.
2.
3.
4.
5.
6.
7.
8.
9.
0.
Gamma Table
Select Color Adjustment
Optical Aperture
Simulation 3D
Motion Filter
Film Mode Threshold
Detail Threshold
3D Source
Floating Inputs
Color Temperature
Reserved
Graphics
Max. Drives
3
Auto
0
0
7600
A
dvanced Image Settings