User manual

Section 3: Operation
3-44 Mirage S+/HD/WU, Matrix S+/HD/WU, Christie HD/DS+/DW, DLV User Manual
020-100001-07 Rev. 1 (11-2009)
ArtNet BASE CHANNEL: When advanced mode is enabled, the projector listens to data
on 64 consecutive channels, or 10 consecutive channels when advanced mode is not
enabled. The projector processes requests that come on either 10 or 64 consecutive
channels beginning with the ‘base channel’ defined here. The requests implement the
following functions:
* Functions are only active when the Slider Lock is set to Unlocked
NOTE: It is important to ensure the channels DO NOT overlap another device.
Example:
Good Bad
Proj1_Base = 0 Proj1_Base = 5
Proj2_Base = 10 Proj2_Base = 9
Proj3_Base = 20 Proj3_Base = 11
ARTNET DEVICE NAME: This option is used to name each device; some ArtNet servers
support querying for devices. Press Enter and use the arrow keys to enter a name.
NOTE: Refer to section 3.4 Navigating the Menus, Edit numerical Values, for text
entry description.
ARTNET DEVICE DESCRIPTION: More information that is returned when a “device
query” has been done.
Broadcast Key
Enter a checkmark if you want keypad commands sent to one projector to be relayed
to all projectors in a serial network. Note that the
Pr oj
key will temporarily “override”
the effect of a broadcast setting and allow you to control a specific projector when
necessary. Disable the setting for all but one (any) projector in a network.
DMX Channel Function Value
Base Shutter
0 – 64
65 – 192
193 – 255
Open
No Action
Closed
Base + 1 Slider Lock
0 – 254
255
Locked
Unlocked *
Base + 2 Input * 1 – 8 Input #
Base + 3 Channel * 1-99 Channel #
Base + 4 Lens – Vertical * †
0
1 – 254
255
Lens Down
Stop
Lens Up
Base + 5 Lens – Horizontal * †
0
1 – 254
255
Lens Right
Stop
Lens Left
Base + 6 Lens – Focus * †
0
1 – 254
255
Negative Focus
Stop
Positive Focus
Base + 7 Lens – Zoom * †
0
1 – 254
255
Zoom Out
Stop
Zoom In
Base + 8 Power *
0
1 – 254
255
Power Off
No Action
Power On
Base + 9 None