User manual

Section 3: Operation
Mirage S+/HD/WU, Matrix S+/HD/WU, Christie HD/DS+/DW, DLV User Manual 3-59
020-100001-07 Rev. 1 (11-2009)
OPTICAL APERTURE - This option is also available under the Advanced Image
Settings menu. See 4.6 – Adjusting the Image for details.
LAMP HISTORY - This read-only option lists the lamps most
recently installed and recorded in the projector. Lamp History
automatically updates whenever you record a new lamp serial
number—the new lamp is added to the bottom of the list.
Use
CHANGE LAMP to record the serial number for a newly installed lamp:
In the Lamp S/N window, use the number text entry keys to record the new lamp serial
number and press
again to accept the change. See Using Slide bars and Other
Controls if you need help entering the number. Once entered, the new lamp serial
number will be added to the Lamp History menu and the Lamp Hours timer will reset
to “0”. Lamp Mode and Lamp Limit remain as they were for the previous lamp and
can be changed at any time. See Figure 3.13.
NOTE: To scroll through letters/alpha numerics, refer to 3.4 Navigating the Menus,
Edit Numerical Values.
1.
2.
3.
4.
5.
6.
7.
8.
Lamp Hours
Lamp S/N
Lamp Message
Lamp Limit
Lamp Mode
Power
Intensity
Optical Aperture
Lamp History
Change Lamp
Lamp
0
?
1000
Power
500
0
3
Lamp S/N
S/N
5679
1234
Hours
1001
0
Lamp History
New serial# entry
automatically updates
Lamp History...
...and resets Lamp
Hours to “
0
”
Figure 3.13. Recording the New Lamp Serial Number
NOTE: Enter a serial number only if you have just installed a new lamp. This will
help ensure that lamp timer is not reset on an old lamp and that the number of hours
logged on the lamp will be accurate.
IMPORTANT
ALWAYS record the serial number of a NEW lamp.