User manual

Section 3: Operation
3-62 Mirage S+/HD/WU, Matrix S+/HD/WU, Christie HD/DS+/DW, DLV User Manual
020-100001-07 Rev. 1 (11-2009)
4. Display the Color Adjustments by X,Y menus for all projectors. Each menu shows
the x/y coordinates defining the “Max Drives” color gamut for this projector. Note
the values shown in one (any) of the displays. See Figure 3.14. Or use the “Copy
From” function to copy them into a “User” gamut in one projector.
Figure 3.14. Jot Down a Set of ”Max Drives” X/Y Values
5. In each projector, select a “User” color adjustment (1-4) to enable Color
Adjustments by X,Y changes. Then enter your recorded x/y values into each menu
(Figure 3.15).
Figure 3.15. Copy X/Y Values into All Projectors
6. In each projector, judge by eye and adjust x/y coordinates slightly in the following
manner: