Setup guide

CP2210 Setup Guide 2-1
020-100524-04 Rev. 1 (05-2014)
2 Installation and Setup
This section provides information and procedures for positioning and installing the cinema projector.
You need these tools to install the CP2210 cinema projector:
• 19 mm wrench
• Protective safety clothing (if you are replacing the lamp)
•Lamp
This section explains how to install, connect and optimize the cinema projector for delivery of superior image
quality. NOTE: Illustrations are graphical representations only and are provided to enhance the understand-
ing of the written material.
2.1 Power Requirements
No protective device is provided in the neutral conductor.
• A single-phase 20A UL listed connection of AC power supply is required to accommodate the detachable
cinema projector plug.
• The power supply, along with protection from short-circuits must be must be part of the building installation.
2.2 What’s In the Box?
These items are included with your CP2210 cinema projector:
• cinema projector with Touch Panel Controller
• User Manual
• Warranty Card
• Web Registration Form
•Power Cord
NOTE: Lamp and lens supplied separately.
2.3 Cinema Projector Components
The CP2210 cinema projector includes these components:
2.3.1 Air Filter Cover and Air Filter
Located directly behind the air filter cover is a field replaceable air filter. The air filter is responsible for
filtering the intake air before it begins circulating in the front compartment to cool the main electronics.
2.3.2 Douser
For most instances, use the douser control buttons on the TPC to blank the display for instant picture muting.
Closing the douser rotates a shutter blade in front of the illumination system and reduces lamp power to
conserve lamp life.
WARNING