Setup guide
CP2210 Setup Guide 4-1
020-100524-04 Rev. 1 (05-2014)
4 Adjust the Image
This section provides information and procedures for adjusting the cinema projector image.
4.1 Maximize Light Output
To ensure optimal operation and peak screen brightness, use LampLOC
™
to adjust the lamp position whenever
you install a new lamp in the cinema projector. When you complete the LampLOC adjustment, the lamp is
centered and is the correct distance from the illumination system. Before running LampLOC, verify that
• The lamp is on and the douser is open.
• A white test pattern is selected.
1. On the TPC, tap Menu > Advanced Setup > LampLOC
™
Setup.
2. Tap Do Auto.
4.2 Calibrate Screen Brightness (fL)
1. On the Touch Pad Controller, tap Menu >
Administrator Setup > Foot Lamberts
Calibration.
2. Complete t he Foot Lamberts Calibration
wizard.
Figure 4-1 Footlamberts Calibration Wizard