2010 OWNER’ S MANUAL 300 SRT
SECTION TABLE OF CONTENTS PAGE 1 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1 2 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 2 3 UNDERSTANDING THE FEATURES OF YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 3 4 UNDERSTANDING YOUR INSTRUMENT PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INTRODUCTION 1 CONTENTS 䡵 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 䡵 Vehicle Identification Number .............. 6 䡵 How To Use This Manual . . . . . . . . . . . . . . . . . . 4 䡵 Vehicle Modifications/Alterations . . . . . . . . . . . . 7 䡵 Warnings And Cautions . . . . . . . . . . . . . . . . . . .
4 INTRODUCTION INTRODUCTION Congratulations on selecting your new Chrysler Group LLC vehicle. Be assured that it represents precision workmanship, distinctive styling, and high quality - all essentials that are traditional to our vehicles. This Owner’s Manual has been prepared with the assistance of service and engineering specialists to acquaint you with the operation and maintenance of your vehicle.
INTRODUCTION 5 1
6 INTRODUCTION WARNINGS AND CAUTIONS This Owner’s Manual contains WARNINGS against operating procedures that could result in an accident or bodily injury. It also contains CAUTIONS against procedures that could result in damage to your vehicle. If you do not read this entire manual, you may miss important information. Observe all Warnings and Cautions. VEHICLE IDENTIFICATION NUMBER The Vehicle Identification Number (VIN) is on the left front corner of the instrument panel.
INTRODUCTION 7 VEHICLE MODIFICATIONS/ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2 CONTENTS 䡵 A Word About Your Keys . . . . . . . . . . . . . . . . . 12 䡵 Vehicle Security Alarm — If Equipped . . . . . . . . 17 ▫ Wireless Ignition Node (WIN) . . . . . . . . . . . . 12 ▫ Rearming Of The System . . . . . . . . . . . . . . . . 17 ▫ Key FOB . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 ▫ To Arm The System . . . . . . . . . . . . . . . . . . . 17 ▫ Removing Key FOB From Ignition . . . . . . . . . 14 ▫ To Disarm The System . . .
10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ▫ Using The Panic Alarm . . . . . . . . . . . . . . . . . 22 ▫ Programming Additional Transmitters . . . . . . 23 ▫ Wind Buffeting . . . . . . . . . . . . . . . . . . . . . . . 40 䡵 Trunk Lock And Release . . . . . . . . . . . . . . . . . 40 ▫ Transmitter Battery Replacement . . . . . . . . . . 23 䡵 Trunk Safety Warning . . . . . . . . . . . . . . . . . . . 41 ▫ General Information . . . . . . . . . . . . . . . . . . . 24 ▫ Trunk Emergency Release . . . .
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ▫ Supplemental Restraint System (SRS) — Airbags . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 ▫ Airbag Deployment Sensors And Controls . . . 60 ▫ Event Data Recorder (EDR) . . . . . . . . . . . . . . 67 ▫ Child Restraints . . . . . . . . . . . . . . . . . . . . . . 69 䡵 Engine Break-In Recommendations . . . . . . . . . . 78 䡵 Safety Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 11 ▫ Transporting Passengers . . . . . . . . . . . . .
12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS Your vehicle uses a keyless ignition system. This system consists of a Key Fob with Remote Keyless Entry (RKE) transmitter and a Wireless Ignition Node (WIN) with integral ignition switch. You can insert the Key Fob into the ignition switch with either side up. NOTE: With Keyless Go, the Electronic Vehicle Information Center (EVIC) will display the ignition switch position (OFF/ACC/RUN).
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 To remove the emergency key, slide the mechanical latch Key Fob The Key Fob operates the ignition switch. It also contains at the top of the Key Fob sideways with your thumb and the Remote Keyless Entry (RKE) transmitter and an then pull the key out with your other hand. emergency key, which stores in the rear of the Key Fob.
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Removing Key Fob From Ignition Place the shift lever in PARK. Turn the Key Fob to the OFF position and then remove the Key Fob. With the Passive Entry/Keyless Go system, the EVIC will display the ignition switch position “OFF/ACC/RUN”. Refer to “Electronic Vehicle Information Center (EVIC)” in “Understanding Your Instrument Panel” for further information.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CAUTION! An unlocked car is an invitation to thieves. Always remove the Key Fob from the ignition and lock all doors when leaving the vehicle unattended. 15 SENTRY KEY姞 The Sentry Key威 Immobilizer System prevents unauthorized vehicle operation by disabling the engine. The system does not need to be armed or activated. Operation is automatic, regardless of whether the vehicle is locked or unlocked.
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If the Vehicle Security Light turns on during normal vehicle operation (vehicle running for longer than 10 seconds), it indicates that there is a fault in the electronics. Should this occur, have the vehicle serviced as soon as possible by an authorized dealer. CAUTION! • Always remove the Key Fobs from the vehicle and lock all doors when leaving the vehicle unattended. • For vehicles equipped with Keyless Go, always remember to place the ignition in OFF.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17 the following audible and visible signals: the horn will Customer Key Programming Programming Key Fobs or RKE transmitters may be pulse, the headlights, park lamps and/or turn signals will flash, and the Vehicle Security Light in the instruperformed at an authorized dealer. ment cluster will flash. General Information The Sentry Key威 system complies with FCC rules Part 15 Rearming of the System and with RSS-210 of Industry Canada.
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE time, the Vehicle Security Light will flash. If it does not illuminate, the Vehicle Security Alarm is not arming. In addition, if you open a door during the arming period, the Vehicle Security Alarm will cancel the arming process. If you wish to rearm the Vehicle Security Alarm after closing the door, you must repeat one of the previouslydescribed arming sequences.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The Vehicle Security Alarm is designed to protect your vehicle; however, you can create conditions where the Vehicle Security Alarm will give you a false alarm. If one of the previously-described arming sequences has occurred, the Vehicle Security Alarm will arm regardless of whether you are in the vehicle or not. If you remain in the vehicle and open a door, the alarm will sound. If this occurs, disarm the Vehicle Security Alarm.
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: None of the courtesy lights will operate if the dimmer control is in the “defeat” position (extreme downward position), unless the overhead map/reading lights are turned on manually. REMOTE KEYLESS ENTRY (RKE) The RKE system allows you to lock or unlock the doors, open the trunk, or activate the Panic Alarm from distances up to approximately 66 ft (20 m) using a hand-held Key Fob with RKE transmitter.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 If your vehicle is equipped with Passive Entry, refer to “Electronic Vehicle Information Center (EVIC)/Personal “Passive Entry System — If Equipped” under “Door Settings (Customer-Programmable Features)” in “Understanding Your Instrument Panel” for further information. Locks” for further information.
22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If the vehicle is equipped with Passive Entry, refer to Using the Panic Alarm “Passive Entry System — If Equipped” under “Door To turn the Panic Alarm feature on or off, press and hold the PANIC button on the RKE transmitter for at least one Locks” for further information. second and release.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 • You may need to be less than 35 ft (11 m) from the 1. Battery access is through a door located on the rear of vehicle when using the transmitter to turn off the the Key Fob. Insert a small, flat blade screwdriver into the Panic Alarm due to the radio frequency noises emitted slot and gently pry open the access door. by the system. Programming Additional Transmitters Programming Key Fobs or RKE transmitters may be performed at an authorized dealer.
24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. Remove and replace the battery. Avoid touching the If your RKE transmitter fails to operate from a normal new battery with your fingers. Skin oils may cause distance, check for these two conditions: battery deterioration. If you touch a battery, clean it with 1. A weak battery in the transmitter. The expected life of rubbing alcohol. the battery is a minimum of three years. 3. Reposition the access door panel over the battery 2.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 NOTE: With Keyless Go, the remote start feature will How to Use Remote Start All of the following conditions must be met before the operate with the Start/Stop button installed in the ignition switch.
26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Enter Remote Start Mode Press and release the REMOTE START button on the RKE transmitter twice, within five seconds. The parking lights will flash and the horn will chirp twice (if programmed). Then, the engine will start and the vehicle will remain in the Remote Start mode for a 15-minute cycle. NOTE: • The park lamps will turn on and remain on during Remote Start mode.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE With Passive Entry Use the Passive Entry feature to unlock the vehicle, press the Start/Stop button one time if the Keyless Go Start/ Stop button is installed in the ignition switch, otherwise, insert the Key Fob into the ignition switch and turn to the RUN position. Refer to the “Passive Entry System” under “Door Locks” for more information.
28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If the door lock plunger is down when you shut the door, the door will lock. Make sure the key is not inside the vehicle before closing the door. WARNING! • For personal security and safety in the event of an accident, lock the vehicle doors before you drive as well as when you park and leave the vehicle. • When leaving the vehicle, always remove the key from the ignition and lock your vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29 the locks to operate. If a door is open, the Key Fob is in the ignition OFF or ACC position, a chime will sound as a reminder to remove the Key Fob. If your vehicle is equipped with Keyless Go, opening the driver’s door when the vehicle’s ignition switch is placed in ACC or RUN (engine stopped) will cause the reminder chime to sound. Refer to “Starting Procedures” in “Starting And Operating” for further details.
30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 6. The doors were not previously locked using the power 2. Cycle the ignition switch between OFF and RUN and door lock switch or Remote Keyless Entry (RKE) then back to OFF four times ending up in the OFF position (do not start engine). transmitter. 3. Press the power door LOCK switch to lock the doors. Automatic Door Locks Programming The Automatic Door Locks feature can be enabled or 4.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31 1. The Automatic Unlock Doors On Exit feature is en- • For vehicles not equipped with the EVIC, perform the abled. following procedure: 2. The transmission was in gear and the vehicle speed 1. Close all doors and place the Key Fob in the ignition. returned to 0 mph (0 km/h). 2. Cycle the ignition switch between OFF and RUN and 3. The transmission is in NEUTRAL or PARK. then back to OFF four times ending up in the OFF position (do not start engine). 4.
32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Passive Entry System — If Equipped • If wearing hand gloves, the Passive Entry door handle The Passive Entry system is an enhancement to the unlock sensitivity can be affected, resulting in a slower vehicle’s Remote Keyless Entry (RKE) system. This fearesponse time.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Unlock From The Passenger Side: With a valid Passive Entry RKE transmitter within 5 ft (1.5 m) of the passenger side of the vehicle, grab the front passenger door handle to unlock all four doors automatically. 33 transmitters.
34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Lock the Vehicle’s Doors The front door handles have LOCK buttons located on the outside of the handle, with one of the vehicle’s Passive Entry RKE transmitters within 5 ft (1.5 m) of the driver’s side, press the driver’s door handle LOCK button to lock all four doors. • The passive entry system will not operate if the RKE transmitter battery is dead.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 NOTE: For emergency key information, refer to “A NOTE: When the Child Protection Door Lock system is Word About Your Keys”. engaged, the door can be opened only by using the outside door handle even though the inside door lock is in the unlocked position. WARNING! Avoid trapping anyone in a vehicle in a collision. Remember that the rear doors can only be opened from the outside when the child protection locks are engaged.
36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • For emergency exit with the system engaged, move the door lock plunger to the UNLOCK position, roll down the window and open the door with the outside door handle. To Disengage the Child Protection Door Lock System 1. Open the rear door. 2. Insert the tip of the emergency key (or similar object) into the child lock control and pull it downward. Child Lock Control 3. Repeat Steps 1 and 2 for the opposite rear door.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37 There are single window controls on each passenger door trim panel, which operate the passenger door windows. Power Windows The window controls will operate only when the ignition The window controls on the driver’s door control all the switch is in the ON or ACC position. door windows. WINDOWS WARNING! Never leave children in a vehicle with the key in the ignition switch or leave a vehicle with Keyless Go in the ACC or RUN position.
38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE AUTO-Down Feature The driver door power window switch and some model passenger door power window switches have an AUTOdown feature. Press the window switch to the second detent, release, and the window will go down automatically. AUTO-Up Feature with Anti–Pinch Protection — If Equipped Lift the window switch to the second detent, release, and the window will go up automatically.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: • If the window runs into any obstacle during autoclosure, it will reverse direction and then go back down. Remove the obstacle and use the window switch again to close the window. passenger doors. To disable the window controls, press and release the window lockout button (setting it in the DOWN position). To enable the window controls, press and release the window lockout button again (setting it in the UP position).
40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Reset Anytime the vehicle battery is disconnected or goes dead, the AUTO-up function will be disabled. To reactivate the AUTO-up feature, perform the following procedure after vehicle power is restored: open or partially open positions. This is a normal occurrence and can be minimized. If the buffeting occurs with the rear windows open, then open the front and rear windows together to minimize the buffeting.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The trunk lid can be released from outside the vehicle by pressing the TRUNK button on the Remote Keyless Entry (RKE) transmitter twice within five seconds. 41 Refer to “Passive Entry — If Equipped” under “Door Locks” in this section for more information on trunk operation with the Passive Entry feature.
42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Trunk Emergency Release The trunk of your vehicle is equipped with an emergency release handle. It is located on the inside of the trunk lid, near the latch, and is coated so that it glows in a darkened trunk. Pull on the handle to open the trunk.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If you will be carrying children too small for adult-sized seat belts, the seat belts or the Lower Anchors and Tether for CHildren (LATCH) feature can be used to hold infant and child restraint systems. For more information on LATCH, see Lower Anchors and Tether for CHildren (LATCH). 43 WARNING! In a collision, you and your passengers can suffer much greater injuries if you are not properly buckled up.
44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ejection and the risk of injury caused by striking the inside of the vehicle. Everyone in a motor vehicle should be belted at all times. Lap/Shoulder Belts All seating positions in your vehicle are equipped with lap/shoulder belts. The belt webbing retractor is designed to lock during very sudden stops or impacts. This feature allows the shoulder part of the belt to move freely with you under normal conditions.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45 WARNING! (Continued) • Wearing your belt in the wrong place could make your injuries in a collision much worse. You might suffer internal injuries, or you could even slide out of part of the belt. Follow these instructions to wear your seat belt safely and to keep your passengers safe, too. • Two people should never be belted into a single seat belt. People belted together can crash into one another in a collision, hurting one another badly.
46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” WARNING! • A belt that is buckled into the wrong buckle will not protect you properly. The lap portion could ride too high on your body, possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • A belt that is too loose will not protect you properly.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) • A belt that is worn under your arm is dangerous. Your body could strike the inside surfaces of the vehicle in a collision, increasing head and neck injury. A belt worn under the arm can cause internal injuries. Ribs aren’t as strong as shoulder bones. Wear the belt over your shoulder so that your strongest bones will take the force in a collision. • A shoulder belt placed behind you will not protect you from injury during a collision.
48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • A lap belt worn too high can increase the risk of internal injury in a collision. The belt forces won’t be at the strong hip and pelvic bones, but across your abdomen. Always wear the lap belt as low as possible and keep it snug. • A twisted belt can’t do its job properly. In a collision, it could even cut into you. Be sure the belt is straight.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Adjustable Upper Shoulder Belt Anchorage In the driver and front passenger seats, the shoulder belt can be adjusted upward or downward to position the belt away from your neck. Push and fully depress the button above the webbing to release the anchorage, then move it up or down to the position that fits you best. 49 As a guide, if you are shorter than average you will prefer a lower position, and if you are taller than average you will prefer a higher position.
50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. Slide the latch plate upward over the folded webbing. How To Engage The Automatic Locking Mode The folded webbing must enter the slot at the top of the 1. Buckle the combination lap and shoulder belt. latch plate. 2. Grasp the shoulder portion and pull downward until 4. Continue to slide the latch plate up until it clears the the entire belt is extracted. folded webbing. 3. Allow the belt to retract.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 by assuring that the belt is tight about the occupant early other occupants to buckle their seat belts. Once the in a collision. Pretensioners work for all size occupants, warning is triggered, BeltAlert威 will continue to chime and flash the Seat Belt Reminder Light for 96 seconds or including those in child restraints. until the driver’s or front passenger’s seat belt is buckled.
52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. Within 60 seconds of turning the ignition switch to the BeltAlert威 Programming The BeltAlert威 can be enabled or disabled by your RUN position, unbuckle and then re-buckle the driver’s authorized dealer or by performing the following steps: seat belt at least three times within 10 seconds, ending with the seat belt buckled. NOTE: Chrysler Group LLC does not recommend deactivating the BeltAlert威.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Seat Belts and Pregnant Women We recommend that pregnant women use the seat belts throughout their pregnancy. Keeping the mother safe is the best way to keep the baby safe. Pregnant women should wear the lap part of the belt across the thighs and as snug across the hips as possible. Keep the belt low so that it does not come across the abdomen. That way the strong bones of the hips will take the force if there is a collision.
54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The Advanced Front Airbags have a multistage inflator design. This allows the airbag to have different rates of inflation based on the severity and type of collision. This vehicle may be equipped with driver and/or front passenger seat track position sensors that may adjust the inflation rate of the Advanced Front Airbags based upon seat position.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55 NOTE: • Supplemental Side Airbag Inflatable Curtains (SABIC) • Airbag covers may not be obvious in the interior trim; • Front and Side Impact Sensors but they will open during airbag deployment. • Front Seat Belt Pretensioners, Seat Belt Buckle Switch, • After any collision, the vehicle should be taken to an and Seat Track Position Sensors authorized dealer immediately.
56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! WARNING! (Continued) • No objects should be placed over or near the airbag on the instrument panel, because any such objects could cause harm if the vehicle is in a collision severe enough to cause the airbag to inflate. • Do not put anything on or around the airbag covers or attempt to open them manually. You may damage the airbags and you could be injured because the airbags may no longer be functional.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 57 The system includes side impact sensors adjacent to both front and rear seat occupants that are calibrated to deploy the SABIC airbags during impacts that require airbag occupant protection. WARNING! Supplemental Side Airbag Inflatable Curtains (SABIC) NOTE: • Should a vehicle rollover occur, the pretensioners and/or SABIC airbags on both sides of the vehicle may deploy.
58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Knee Impact Bolsters The Knee Impact Bolsters help protect the knees of the driver and the front passenger, and position front occupants for the best interaction with the Advanced Front Airbags. WARNING! Infants in rear-facing child restraints should NEVER ride in the front seat of a vehicle with a passenger Advanced Front Airbag. An airbag deployment can cause severe injury or death to infants in that position.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 59 If a child from 1 to 12 years old (not in a rear facing child seat) must ride in the front passenger seat, move the seat as far back as possible and use the proper child restraint. (Refer to “Child Restraints”) If the airbag system in this vehicle needs to be modified to accommodate a disabled person, contact the Customer Center. Phone numbers are provided under ⬙If You Need Assistance⬙.
60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) • Being too close to the steering wheel or instrument panel during Advanced Front Airbag deployment could cause serious injury, including death. Airbags need room to inflate. Sit back, comfortably extending your arms to reach the steering wheel or instrument panel. • Side airbags also need room to inflate. Do not lean against the door or window. Sit upright in the center of the seat.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 61 The side airbags will not deploy in all side collisions. Side The ORC contains a backup power supply system that airbag deployment will depend on the severity and type may deploy the airbags even if the battery loses power or it becomes disconnected prior to deployment. of collision. Also, the ORC turns on the Airbag Warning Light in the instrument panel for approximately six to eight seconds for a self-check when the ignition is first turned on.
62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! Ignoring the Airbag Warning Light in your instrument panel could mean you won’t have the airbags to protect you in a collision. If the light does not come on, stays on after you start the vehicle, or if it comes on as you drive, have the airbag system checked right away by an authorized dealer.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE covers the window. The airbag inflates in about 30 ms (about one-quarter of the time that it takes to blink your eyes) with enough force to injure you if you are not belted and seated properly, or if items are positioned in the area where the side curtain airbag inflates. This especially applies to children. The side curtain airbag is only about 3-1/2 in (9 cm) thick when it is inflated.
64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If a Deployment Occurs • As the airbags deflate, you may see some smoke-like The front airbags are designed to deflate immediately particles. The particles are a normal by-product of the after deployment. process that generates the non-toxic gas used for airbag inflation. These airborne particles may irritate NOTE: Front and/or side airbags will not deploy in all the skin, eyes, nose, or throat. If you have skin or eye collisions.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! Deployed airbags and seat belt pretensioners cannot protect you in another collision. Have the airbags, seat belt pretensioners, and the front passenger seat belt retractor assembly replaced by an authorized dealer immediately. Also, have the Occupant Restraint Controller (ORC) system serviced as well. 65 Maintaining Your Airbag System WARNING! • Modifications to any part of the airbag system could cause it to fail when you need it.
66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) • Do not attempt to modify any part of your advanced airbag system. The airbag may inflate accidentally or may not function properly if modifications are made. Take your vehicle to an authorized dealer for any advanced airbag system service. If your seat, including your trim cover and cushion, needs to be serviced in any way (including removal or loosening/tightening of seat attachment bolts), take the vehicle to your authorized dealer.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: If the speedometer, tachometer, or any engine related gauges are not working, the Occupant Restraint Controller (ORC) may also be disabled. The airbags may not be ready to inflate for your protection. Promptly check the fuse block for blown fuses. Refer to the label located on the inside of the fuse block cover for the proper airbag fuses. See your authorized dealer if the fuse is good.
68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE In the event that an investigation is undertaken by Chrysler Group LLC (regardless of initiative), the company or its designated representative will first obtain permission of the appropriate custodial entity for the vehicle (usually the vehicle owner or lessee) before accessing the electronic data stored, unless ordered to image the data by a court with legal jurisdiction (i.e., pursuant to a warrant).
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Engine RPM WARNING! • Brake switch status • Pedal position • And other parameters configuration 69 depending on vehicle In a collision, an unrestrained child, even a tiny baby, can become a projectile inside the vehicle. The force required to hold even an infant on your lap could become so great that you could not hold the child, no matter how strong you are. The child and others could be badly injured.
70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Infants and Child Restraints • Safety experts recommend that children ride rearward-facing in the vehicle until they are at least one year old and weigh at least 20 lbs (9 kg). Two types of child restraints can be used rearward-facing, infant carriers and convertible child seats. • The infant carrier is only used rearward-facing in the vehicle. It is recommended for children who weigh up to about 20 lbs (9 kg).
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 71 The belt-positioning booster seat is for children weighing • Check belt fit periodically. A child’s squirming or more than 40 lbs (18 kg), but who are still too small to fit slouching can move the belt out of position. the vehicle’s seat belts properly. If the child cannot sit • If the shoulder belt contacts the face or neck, move the with knees bent over the vehicle’s seat cushion while the child closer to the center of the vehicle.
72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • Improper installation can lead to failure of an infant or child restraint. It could come loose in a collision. The child could be badly injured or killed. Follow the manufacturer’s directions exactly when installing an infant or child restraint. • A rearward-facing child restraint should only be used in a rear seat.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE LATCH — Child Seat Anchorage System (Lower Anchors and Tether for CHildren) Your vehicle’s rear seat is equipped with the child restraint anchorage system called LATCH. The LATCH system provides for the installation of the child restraint without using the vehicle’s seat belts, instead securing the child restraint using lower anchorages and upper tether straps from the child restraint to the vehicle structure.
74 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Again, carefully follow the installation instructions that are provided with the child restraint system. The rear seat lower anchorages are round bars located at the rear of the seat cushion where it meets the seatback and are just visible when you lean into the rear seat to install the child restraint. You will easily feel them if you run your finger along the intersection of the seatback and seat cushion surfaces.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 75 means of adjusting the tension in the strap. Forward- NOTE: facing toddler restraints and some rear-facing infant • Ensure that the tether strap does not slip into the opening between the seatbacks as you remove slack in restraints will also be equipped with a tether strap, a the strap. hook for attachment to the tether strap anchorage and a means of adjusting the tension of the strap.
76 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The seat belt must be in the Automatic Locking Mode in order to enable a child restraint to be tightly installed. Improper installation of a child restraint to the Refer to “Automatic Locking Mode”. A locking clip LATCH anchorages can lead to failure of an infant or should not be necessary once the automatic locking child restraint. The child could be badly injured or feature is enabled. Position the shoulder and lap belt on killed.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 77 If the belt still can’t be tightened, or if pulling and pushing on the restraint loosens the belt, you may need to do something more. Disconnect the latch plate from the buckle, turn the buckle around, and insert the latch plate into the buckle again. If you still can’t make the child restraint secure, try a different seating position. 2 To attach a child restraint tether strap: 1.
78 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. Attach the tether strap hook (A) of the child restraint to the anchor (B) and remove slack in the tether strap according to the child restraint manufacturer’s instructions. Transporting Pets Airbags deploying in the front seat could harm your pet. An unrestrained pet will be thrown about and possibly injured, or injure a passenger during panic braking or in a collision.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The engine oil installed in the engine at the factory is a high-quality energy conserving type lubricant. Oil changes should be consistent with anticipated climate conditions under which vehicle operations will occur. For the recommended viscosity and quality grades refer to “Maintenance Procedures” in “Maintaining Your Vehicle”. NON-DETERGENT OR STRAIGHT MINERAL OILS MUST NEVER BE USED.
80 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Exhaust Gas WARNING! Exhaust gases can injure or kill. They contain carbon monoxide (CO), which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you. To avoid breathing (CO) follow these safety tips: Do not run the engine in a closed garage or in confined areas any longer than needed to move your vehicle in or out of the area.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 81 Defroster Check operation by selecting the defrost mode and place the blower control on high speed. You should be able to Seat Belts feel the air directed against the windshield. See your Inspect the belt system periodically, checking for cuts, authorized dealer for service if your defroster is frays, and loose parts. Damaged parts must be replaced inoperable. immediately. Do not disassemble or modify the system.
82 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! WARNING! (Continued) Pedals that cannot move freely can cause loss of vehicle control and increase the risk of serious personal injury. • Always make sure that floor mats are properly attached to the floor mat fasteners. • Never place or install floor mats or other floor coverings in the vehicle that cannot be properly secured to prevent them from moving and interfering with the pedals or the ability to control the vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 83 Periodic Safety Checks You Should Make Outside the Vehicle Door Latches Check for positive closing, latching, and locking. Tires Examine tires for excessive tread wear and uneven wear patterns. Check for stones, nails, glass, or other objects lodged in the tread. Inspect the tread and sidewall for cuts and cracks. Check the wheel nuts for tightness. Check the tires (including spare) for proper pressure.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS 䡵 Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 ▫ Illuminated Vanity Mirrors . . . . . . . . . . . . . . 93 ▫ Automatic Dimming Mirror . . . . . . . . . . . . . . 90 䡵 Uconnect™ Phone — If Equipped . . . . . . . . . . . 93 ▫ Outside Mirrors . . . . . . . . . . . . . . . . . . . . . . 91 ▫ Operation . . . . . . . . . . . . . . . . . . . . . . . . . . 96 ▫ Outside Mirrors Folding Feature — If Equipped . . . . . . . . . . . . . .
86 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 䡵 Voice Command — If Equipped . . . . . . . . . . . 122 ▫ Voice Command System Operation . . . . . . . . 122 ▫ Commands . . . . . . . . . . . . . . . . . . . . . . . . 124 ▫ Voice Training . . . . . . . . . . . . . . . . . . . . . . 127 䡵 Seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127 ▫ Power Seats . . . . . . . . . . . . . . . . . . . . . . . . 128 ▫ Power Reclining Seats . . . . . . . . . . . . . . . . . 129 ▫ Lumbar Support . . . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Fog Lights . . . . . . . . . . . . . . . . . . . . . . . . . 145 87 ▫ Rain Sensing Wipers . . . . . . . . . . . . . . . . . . 150 ▫ Multifunction Lever . . . . . . . . . . . . . . . . . . 145 䡵 Power Tilt/Telescoping Steering Column — If Equipped . . . . . . . . . . . . . . . . . . . ▫ Turn Signals . . . . . . . . . . . . . . . . . . . . . . . . 145 䡵 Adjustable Pedals . . . . . . . . . . . . . . . . ▫ Lane Change Assist . . . . . . . . . . . . . . . . . . .
88 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 䡵 Overhead Console . . . . . . . . . . . . . . . . . . . . . 163 ▫ Opening Sunroof — Express . . . . . . . . . . . . 172 ▫ Courtesy/Reading Lights . . . . . . . . . . . . . . 164 ▫ Closing Sunroof — Express . . . . . . . . . . . . . 172 ▫ Sunglasses Storage . . . . . . . . . . . . . . . . . . . 164 ▫ Pinch Protect Feature . . . . . . . . . . . . . . . . . 172 䡵 Garage Door Opener — If Equipped . . . . . . . . 164 ▫ Pinch Protect Override . . . . . . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 89 ▫ Rear Seat Cupholders . . . . . . . . . . . . . . . . . 177 䡵 Cargo Area Features . . . . . . . . . . . . . . . . . . . 180 䡵 Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178 ▫ Trunk Mat — If Equipped . . . . . . . . . . . . . . 180 ▫ Console Features . . . . . . . . . . . . . . . . . . . . 178 䡵 Rear Window Features . . . . . . . . . . . . . . . . . . 181 ▫ Cargo Area . . . . . . . . . . . . . . . . . . . . . . . .
90 UNDERSTANDING THE FEATURES OF YOUR VEHICLE MIRRORS Automatic Dimming Mirror This mirror automatically adjusts for headlight glare from vehicles behind you. You can turn the feature on or off by pressing the button at the base of the mirror. A light next to the button will illuminate to indicate when the dimming feature is activated. Automatic Dimming Mirror CAUTION! To avoid damage to the mirror during cleaning, never spray any cleaning solution directly onto the mirror.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Outside Mirrors To receive maximum benefit, adjust the outside mirror(s) to center on the adjacent lane of traffic and a slight overlap of the view obtained from the inside mirror. 91 Outside Mirrors Folding Feature — If Equipped Some models have exterior mirrors that are hinged. The hinge allows the mirror to pivot forward and rearward to resist damage. The hinge has three detent positions: full forward, full rearward and normal.
92 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Tilt Mirror in Reverse The Tilt Mirror in Reverse feature tilts the outside rearview mirrors downward when the ignition is placed in the RUN position and the transmission is in REVERSE. This feature provides the driver with a better view of the ground and vehicle in the area of the rear tires when backing up. The mirrors will move back to their previous position when the transmission is shifted out of REVERSE.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 93 NOTE: For vehicles equipped with Driver Memory Seat, you can use your Remote Keyless Entry (RKE) transmitter or the MEMORY switch on the driver-side door trim panel to return the power mirrors to preprogrammed positions. Refer to “Driver Memory Seat” in “Understanding the Features of Your Vehicle” for further information. Heated Mirrors — If Equipped These mirrors are heated to melt frost or ice.
94 UNDERSTANDING THE FEATURES OF YOUR VEHICLE phone’s audio is transmitted through your vehicle’s Uconnect™ Phone allows you to transfer calls between audio system; the system will automatically mute your the system and your cellular phone as you enter or exit your vehicle and enables you to mute the system’s radio when using the Uconnect™ Phone. microphone for private conversation.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Any voice commanded system should be used only in safe driving conditions following local laws and phone use. All attention should be kept on the roadway ahead. Failure to do so may result in an accident causing serious injury or death. Uconnect™ Phone Button Depending on the vehicle options, either the radio or the mirror will contain the two control (Uconnect™ Phone button) and buttons (Voice Command button) that will enable you to access the system.
96 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Operation Voice commands can be used to operate the Uconnect™ Phone and to navigate through the Uconnect™ Phone menu structure. Voice commands are required after most Uconnect™ Phone prompts. You will be prompted for a specific command and then guided through the available options. example, you can use the combined form voice command ⬙Phonebook New Entry,⬙ or you can break the combined form command into two voice commands: ⬙Phonebook⬙ and ⬙New Entry.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 97 Cancel Command • When prompted, after the beep, say ⬙Pair a Phone⬙ and At any prompt, after the beep, you can say ⬙Cancel⬙ and follow the audible prompts. you will be returned to the main menu. However, in a • You will be asked to say a four-digit Personal Identifew instances the system will take you back to the fication Number (PIN), which you will later need to previous menu. enter into your cellular phone.
98 UNDERSTANDING THE FEATURES OF YOUR VEHICLE phone to use if multiple cellular phones are in the • The Uconnect™ Phone will confirm the phone number vehicle at the same time. For example, if priority three and then dial. The number will appear in the display and priority five phones are present in the vehicle, the of certain radios. Uconnect™ Phone will use the priority three cellular Call by Saying a Name phone when you make a call. You can select to use a button to begin.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 99 • The Uconnect™ system will confirm the name and • When prompted, enter the number designation (e.g., then dial the corresponding phone number, which ⬙Home,⬙ ⬙Work,⬙ ⬙Mobile,⬙ or ⬙Pager⬙). This will allow may appear in the display of certain radios. you to store multiple numbers for each phonebook entry, if desired.
100 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Phonebook Download – Automatic Phonebook • Depending on the maximum number of entries downTransfer From Cellular Phone loaded, there may be a short delay before the latest If equipped and specifically supported by your phone, downloaded names can be used. Until then, if availUconnect™ Phone automatically downloads names (text able, the previous downloaded phonebook is available names) and number entries from the cellular phone’s for use. phonebook.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Phonebook Download — Single Entry If equipped and supported by your phone, Uconnect™ Phone allows the user to download entries from their phone via Bluetooth威. To use this feature, press the button and say “Phonebook Download.” The system prompts, “Ready to accept “V” card entry via Bluetooth威…” The system is now ready to accept phonebook entries from your phone using the Bluetooth威 Object Exchange Profile (OBEX).
102 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • You will then be asked for the name of the phonebook Delete Uconnect™ Phonebook Entry entry that you wish to edit. NOTE: Editing phonebook entries is recommended • Next, choose the number designation (home, work, when the vehicle is not in motion. cellular, or pager) that you wish to edit. • Press the button to begin.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 103 • After you enter the name, the Uconnect™ Phone will • Note that only the phonebook in the current language ask you which designation you wish to delete: home, is deleted. work, cellular, pager, or all. Say the designation you • Automatic downloaded phonebook entries cannot be wish to delete. deleted or edited. • Note that only the phonebook entry in the current List All Names in the Uconnect™ Phonebook language is deleted. button to begin.
104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The Uconnect™ Phone will then prompt you as to the call, press and hold the button until you hear a number designation you wish to call. single beep, indicating that the incoming call was rejected. • The selected number will be dialed. Phone Call Features The following features can be accessed through the Uconnect™ Phone if the feature(s) are available on your cellular service plan.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Making a Second Call While Current Call is in Progress To make a second call while you are currently on a call, press the button and say ⬙Dial⬙ or ⬙Call⬙ followed by the phone number or phonebook entry you wish to call. The first call will be on hold while the second call is in progress. To go back to the first call, refer to ⬙Toggling Between Calls⬙ in this section. To combine two calls, refer to ⬙Conference Call⬙ in this section.
106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Call Termination To end a call in progress, momentarily press the button. Only the active call(s) will be terminated and if there is a call on hold, it will become the new active call. If the active call is terminated by the phone far end, a call on hold may not become active automatically. This is cell phone-dependent. To bring the call back from hold, press button until you hear a single beep. and hold the Redial • Press the button to begin.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Uconnect™ Phone Features 107 Emergency Assistance If you are in an emergency and the cellular phone is reachable: Language Selection To change the language that the Uconnect™ Phone is using: • Pick up the phone and manually dial the emergency number for your area. • Press the button to begin.
108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Canada and 060 for Mexico). The number dialed may Towing Assistance not be applicable with the available cellular service If you need towing assistance: and area. • Press the button to begin. • If supported, this number may be programmable on • After the ⬙Ready⬙ prompt and the following beep, say button and some systems. To do this, press the ⬙Towing Assistance.⬙ say ‘Setup’, followed by ‘Emergency’.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 109 When calling a number with your Uconnect™ Phone that normally requires you to enter in a touch-tone sequence on your cellular phone keypad, you can press the button and say the sequence you wish to enter, followed by the word ⬙Send.⬙ For example, if required to enter your PIN followed with a pound, (3 7 4 6 #), you can Voice Mail Calling button and say, ⬙3 7 4 6 # Send.
110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The Uconnect™ Phone will then send the corresponding Turning Confirmation Prompts ON/OFF phone number associated with the phonebook entry, as Turning confirmation prompts off will stop the system from confirming your choices (e.g., the Uconnect™ tones over the phone. Phone will not repeat a phone number before you dial it). NOTE: • You may not hear all of the tones due to cellular phone • Press the button to begin. network configurations. This is normal.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Dialing Using the Cellular Phone Keypad You can dial a phone number with your cellular phone keypad and still use the Uconnect™ Phone (while dialing via the cellular phone keypad, the user must exercise caution and take precautionary safety measures). By dialing a number with your paired Bluetooth威 cellular phone, the audio will be played through your vehicle’s audio system. The Uconnect™ Phone will work the same as if you dial the number using Voice Command.
112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE from your Uconnect™ Phone paired cellular phone to the • When prompted, say ⬙List Phones.⬙ button Uconnect™ Phone or vice versa, press the • The Uconnect™ Phone will play the phone names of and say ⬙Transfer Call.⬙ all paired cellular phones in order from the highest to the lowest priority.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The selected phone will be used for the next phone call. If the selected phone is not available, the Uconnect™ Phone will return to using the highest priority phone present in or near (approximately within 30 ft (9 m)) the vehicle. Delete Uconnect™ Phone Paired Cellular Phones • • • • 113 Things You Should Know About Your Uconnect™ Phone Uconnect™ Phone Tutorial To hear a brief tutorial of the system features, press the button and say “Uconnect™ Tutorial.
114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Press the button and say the ⬙Setup, Voice • Training⬙ command. • Repeat the words and phrases when prompted by the Uconnect™ Phone. For best results, the Voice Training session should be completed when the vehicle is parked • with the engine running, all windows closed, and the blower fan switched off. • This procedure may be repeated with a new user. The system will adapt to the last trained voice only.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 115 • Even though the system is designed for users speaking • Even though international dialing for most number in North American English, French, and Spanish accombinations is supported, some shortcut dialing cents, the system may not always work for some. number combinations may not be supported.
116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Performance, such as audio clarity, echo, and loudness Power-Up to a large degree rely on the phone and network, and After switching the ignition key from OFF to either the ON or ACC position, or after a language change, you not the Uconnect™ Phone. must wait at least five seconds prior to using the system. • Echo at the phone far end can sometimes be reduced by lowering the in-vehicle audio volume.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 117 3
118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 119 3
120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Primary zero one two three four five six seven eight nine star (*) plus (+) pound (#) add location all Voice Commands Alternate(s) Voice Commands Alternate(s) Primary call cancel confirmation prompts continue delete dial download edit emergency English erase all Espanol Francais help home
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Primary language list names list phones mobile mute mute off new entry no pager pair a phone phone pairing phonebook previous record again Voice Commands Alternate(s) pairing phone book 121 Voice Commands Alternate(s) Primary redial return to main menu select phone send set up towing assistance transfer call Uconnect™ Tutorial try again voice training work yes return or main menu select phone settings or phone set up 3
122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE General Information This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. • This device may not cause harmful interference. • This device must accept any interference received, including interference that may cause undesired operation.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 123 NOTE: If you do not say a command within a few For example, if you are in the disc menu and you are seconds, the system will present you with a list of listening to FM radio, you can speak commands from the disc menu or from the FM radio menu. options. If you ever wish to interrupt the system while it lists When using this system, you should speak clearly and at button, listen a normal speaking volume.
124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE In this mode, you can say the following commands: Commands The Voice Command system understands two types of • “Radio” (to switch to the radio mode) commands. Universal commands are available at all times. Local commands are available if the supported • “Disc” (to switch to the disc mode) radio mode is active. • “Memo” (to switch to the memo recorder) Changing the Volume • “System Setup” (to switch to system setup) 1.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Radio FM To switch to the FM band, say “FM” or “Radio FM”.
126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Memo To switch to the voice recorder mode, say “Memo”. In this mode, you may say the following commands: − “Previous” (to play the previous memo) − “Delete” (to delete a memo) • “Delete All” (to delete all memos) • “New Memo” (to record a new memo) — During the System Setup recording, you may press the Voice Command button to stop recording. You proceed by saying one of To switch to system setup, say “Setup”.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 127 NOTE: Keep in mind that you have to press the Voice SEATS button first and wait for the beep Seats are a primary part of the Occupant Restraint System Command of the vehicle. They need to be used properly for safe before speaking the “Barge In” commands. operation of the vehicle.
128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Power Seats The power seat switch is on the outboard side of the seat near the floor. Use this switch to move the driver’s seat up or down, forward or rearward, or to recline the seatback. The passenger’s seat will move up or down, forward or rearward. WARNING! Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Power Reclining Seats The recliner control is located on the outboard side of the seat. Power Seat Recline Switch 129 WARNING! Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt and be seriously or even fatally injured. Use the recliner only when the vehicle is parked.
130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Lumbar Support This feature allows you to increase or decrease the amount of lumbar support. Turn the control lever forward to increase and rearward to decrease the desired amount of lumbar support. Head Restraints Head restraints can reduce the risk of injury in the event of a rear impact. The head restraint should be adjusted so the top of the head restraint is located above the top of your ear.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131 3 Adjustable Head Restraints NOTE: The rear head restraints are not adjustable.
132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Ensure that the front of the head restraint is facing toward the front of the vehicle. WARNING! Driving a vehicle with the head restraints removed or improperly adjusted could cause serious injury or death in the event of a collision. The head restraints should always be checked prior to operating the vehicle and never adjusted while the vehicle is in motion. Always adjust the head restraints when the vehicle is in PARK.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Press the switch once to select High-level heating. Press the switch a second time to select Low-level heating. Press the switch a third time to shut the heating elements Off. If High-level heating is selected, the system will automatically switch to the Low-level after 30 minutes of continuous operation. At that time, the number of indicators illuminated changes from two to one, indicating the change.
134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! Repeated overheating of the seat could damage the heating element and/or degrade the material of the seat. Folding Rear Seat The rear seatbacks can be folded forward to provide an additional storage area. Pull on the loops shown in the illustration to fold down either or both seatbacks. These loops can be tucked away when not in use.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! • Be certain that the seatback is securely locked into position. If the seatback is not securely locked into position, the seat will not provide the proper stability for child seats and/or passengers. An improperly latched seat could cause serious injury. • The cargo area in the rear of the vehicle (with the rear seatbacks in the locked-up or folded down position) should not be used as a play area by children when the vehicle is in motion.
136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The Memory switch is located on the driver’s door trim panel. The switch contains an S (SET) button to activate the memory save function. It also contains a rocker switch labeled with the number (1) and the number (2). The rocker switch allows the driver to recall either of two pre-programmed memory profiles by pressing the appropriate side of the switch.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137 1. Adjust all memory profile settings to desired prefer- Linking and Unlinking the Remote Keyless Entry ences (i.e., seat, side mirror, adjustable pedals, power tilt, Transmitter to Memory Your RKE transmitters can be programmed to recall one telescopic steering column, and radio station presets). of two pre-programmed memory profiles by pressing the 2. Press and release the SET button on the Memory UNLOCK button on the RKE transmitter.
138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Your RKE transmitters can be unlinked to your memory settings by pressing the SET (S) button followed by the UNLOCK button on the RKE transmitter in Step 4 above. Memory Position Recall A recall can be cancelled by pressing any of the MEMORY buttons (S, 1, or 2) on the driver’s door during a recall. When a recall is cancelled, the driver seat, side mirror, adjustable pedals, power tilt and telescopic steering column stop moving.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139 • When you remove the Key Fob from the ignition (or • The Easy Entry/Easy Exit feature is disabled when the change the ignition to OFF, for vehicles equipped with driver seat position is less than 0.9 in (22.7 mm) Keyless Go™), the driver seat will move about 2.4 in forward of the rear stop. At this position, there is no (60 mm) rearward if the driver seat position is greater benefit to the driver by moving the seat for Easy Exit than or equal to 2.7 in (67.
140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE TO OPEN AND CLOSE THE HOOD Two latches must be released to open the hood. 1. Pull the hood release lever located under the left side of the instrument panel. 2. Move to the outside of the vehicle and push the safety catch to the left. The safety catch is located under the center front edge of the hood. Hood Safety Catch Hood Release Lever Use the hood prop rod (if equipped) to secure the hood in the open position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! To prevent possible damage, do not slam the hood to close it. Lower the hood, until it is open approximately 6 in (15 cm), and then drop it. This should secure both latches. Never drive your vehicle unless the hood is fully closed, with both latches engaged. WARNING! Be sure the hood is fully latched before driving your vehicle. If the hood is not fully latched, it could open when the vehicle is in motion and block your vision.
142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Automatic Headlights This system automatically turns the headlights on or off according to ambient light levels. To turn the system on, rotate the headlight switch counterclockwise to the A (AUTO) position. When the system is on, the headlight time delay feature is also on. This means the headlights will stay on for up to 90 seconds after you place the ignition in the OFF position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143 The Headlights On with Wipers feature can be enabled or 2. Rotate the headlight switch counterclockwise to the disabled. Refer to “Electronic Vehicle Information Center AUTO position. (EVIC)/Customer-Programmable Features” in “Under3. Push the multifunction lever away from you to switch standing Your Instrument Panel” for further information. the headlights to the high beam position.
144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Also, dirt, film, and other obstructions on the windshield NOTE: The lights must be turned off within 45 seconds or camera lens will cause the system to function of placing the ignition in OFF position to activate this feature. improperly. Headlight Time Delay This feature provides the safety of headlight illumination for up to 90 seconds (programmable) when leaving your vehicle in an unlit area.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 145 Fog Lights The front fog light switch is built into the headlight switch. To activate the front fog lights, turn on the parking lights or the low beam headlights and press the headlight switch. To turn off the front fog lights, either press headlight switch again or turn off the headlight switch. 3 An indicator light in the instrument cluster illuminates when the fog lights are turned on.
146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE If either light remains on and does not flash, or there is a very fast flash rate, check for a defective outside light bulb. If an indicator fails to light when the lever is moved, it would suggest that the indicator bulb is defective. NOTE: A “Turn Signal On” message will appear in the EVIC and a continuous chime will sound if the vehicle is driven more than 1 mile (1.6 km) with either turn signal on.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 147 open. This includes the glove box light, but not the trunk light. To restore interior light operation, either place the ignition in the ON position or cycle the light switch. Dimmer Control Overhead Console Interior Lights The interior lights come on when a door is opened. The dimmer control is part of the headlight switch and is located on the left side of the instrument panel.
148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Interior Light Defeat (OFF) Rotate the dimmer control to the extreme bottom off position. The interior lights will remain off when the doors are open. Parade Mode (Daytime Brightness Feature) Rotate the dimmer control upward to the first detent. This feature brightens all text displays such as the odometer, EVIC, and radio when the parking lights or headlights are on.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! Turn the windshield wipers off when driving through an automatic car wash. Damage to the windshield wipers may result if the wiper switch is left in any position other than off. Intermittent Wiper System Use the intermittent wiper when weather conditions make a single wiping cycle with a variable pause between cycles desirable. Rotate the end of the multifunction lever to select the desired delay interval.
150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Mist Feature Push the multifunction lever inward (toward the steering column) to the first detent to activate a single wipe cycle to clear off road mist or spray from a passing vehicle. The wipers will continue to operate until you release the multifunction lever. Headlights On with Wipers When this feature is active, the headlights will turn on approximately 10 seconds after the wipers are turned on if the headlight switch is placed in the AUTO position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 151 NOTE: • Low Temperature Wipe Inhibit — The Rain Sensing • The Rain Sensing feature will not operate when the feature will not operate when the ignition is placed in wiper speed is in the low or high position.
152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE POWER TILT/TELESCOPING STEERING COLUMN — IF EQUIPPED This feature allows you to tilt the steering column upward or downward. It also allows you to lengthen or shorten the steering column. The power tilt/telescoping steering column lever is located below the multifunction lever on the steering column. Power Tilt/Telescoping Steering To tilt the steering column, move the lever up or down as desired.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 153 WARNING! Do not adjust the steering column while driving. Adjusting the steering column while driving or driving with the steering column unlocked, could cause the driver to lose control of the vehicle. Be sure the steering column is locked before driving your vehicle. Failure to follow this warning may result in serious injury or death.
154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The pedals can be adjusted while driving. • The pedals cannot be adjusted when the vehicle is in REVERSE or when the Electronic Speed Control is on. One of the following messages will display in the Electronic Vehicle Information Center (EVIC) if a pedal adjustment is attempted when the system is locked out: “Adjustable Pedal Disabled — Cruise Control Engaged” or “Adjustable Pedal Disabled — Vehicle In Reverse.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 155 NOTE: In order to ensure proper operation, the Electronic Speed Control System has been designed to shut down if multiple Speed Control functions are operated simultaneously. If this occurs, the Electronic Speed Control System can be reactivated by pushing the Electronic The Electronic Speed Control lever, located on the rightSpeed Control ON/OFF button and resetting the desired side of the steering wheel, operates the system. vehicle set speed.
156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Leaving the Electronic Speed Control system on when not in use is dangerous. You could accidentally set the system or cause it to go faster than you want. You could lose control and have an accident. Always leave the Electronic Speed Control system off when you are not using it. • The Electronic Speed Control may not engage if a different size tire is installed on one wheel, such as the compact spare tire.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Resume Speed If you deactivated the Electronic Speed Control without erasing the set speed from memory and your vehicle speed is above 20 mph (32 km/h) you can resume the previous set speed. To do so, push the lever upward to RESUME ACCEL and release. Then remove your foot from the accelerator pedal. To Vary the Speed Setting When the Electronic Speed Control is set, you can increase speed by pushing up and holding the RESUME ACCEL lever.
158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The automatic transmission will downshift while climb- PARKSENSE姞 REAR PARK ASSIST ing uphill or descending downhill. This downshift is The ParkSense威 Rear Park Assist system is a driver aid that senses for obstacles behind the vehicle. Refer to necessary to maintain vehicle set speed. ParkSense威 System Usage Precautions for limitations of On steep hills, a greater speed loss or gain may occur, so this system and recommendations.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE ParkSense威 uses four sensors located in the rear bumper to scan for obstacles up to 79 in (200 cm) away from the rear bumper fascia. The ParkSense威 Warning Display located above the rear window provides both visible and audible warnings to indicate the range of the object.
160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING DISPLAY DISTANCES DISPLAY INDICATOR Inner LED 1st LED 2nd LED 3rd LED 4th LED 5th LED 6th LED 7th LED OBSTACLE DISTANCE FROM: REAR CORNERS REAR CENTER 79 in (200 cm) 51.2 in (130 cm) 45.3 in (115 cm) 31.5 in (80 cm) 39.3 in (100 cm) 25.5 in (65 cm) 33.5 in (85 cm) 20 in (50 cm) 27.6 in (70 cm) 16 in (40 cm) 19.7 in (50 cm) 6 in (15 cm) 11.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 161 clean and clear of snow, ice, mud, dirt, or other • When you turn ParkSense威 off, the instrument cluster obstruction, see your authorized dealer for service. will display “PARK ASSIST DISABLED.” Furthermore, once you turn ParkSense威 off, it remains off • Clean the ParkSense威 sensors regularly, taking care until you turn it on again, even if you cycle the ignition not to scratch or damage them. The sensors must not key.
162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! WARNING! • The ParkSense威 Rear Park Assist system is only a parking aid and it is unable to recognize every obstacle, including small obstacles. Parking curbs might be temporarily detected or not detected at all. Obstacles located above or below the sensors will not be detected when they are in close proximity.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! (Continued) • Before using the ParkSense威 Rear Park Assist system, it is strongly recommended that the ball mount and hitch ball assembly is disconnected from the vehicle when the vehicle is not used for towing. Failure to do so can result in injury or damage to vehicles or obstacles because the hitch ball will be much closer to the obstacle than the rear fascia when the warning display turns on the single flashing arc and sounds the continuous tone.
164 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The storage compartment access is a ⬙push/push⬙ design. Push on the raised bar on the compartment door to open. At the forward end of the console are two courtesy/ Push on the raised bar to close. reading lights. Press the lens to turn on the light. Press it a second time GARAGE DOOR OPENER — IF EQUIPPED HomeLink威 replaces up to three remote controls (handto turn off the light.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 165 WARNING! HomeLink威 Buttons NOTE: HomeLink威 is disabled when the Vehicle Security Alarm is active. • Your motorized door or gate will open and close while you are training the Universal Transceiver. Do not train the transceiver if people, pets, or other objects are in the path of the door or gate. Only use this transceiver with a garage door opener that has a “stop and reverse” feature as required by federal safety standards.
166 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Programming HomeLink姞 2. Place the handheld transmitter 1 to 3 in (3 to 8 cm) from the HomeLink威 buttons while keeping the EVIC display in view. Before You Begin If you have not trained any of the HomeLink威 buttons, erase all channels before you begin training. For optimal training, point the battery end of the handheld transmitter away from the HomeLink威. To do this, press and hold the two outside buttons for up to 20 seconds.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 167 NOTE: Some gate operators and garage door openers This can usually be found where the hanging antenna may require you to replace Step 3 with procedures noted wire is attached to the garage door opener motor (it is in the “Gate Operator/Canadian Programming” section. NOT the button normally used to open and close the door). 4. Press and hold the just-trained HomeLink威 button. If the channel has been trained, the EVIC display will now state “CHANNEL # TRANSMIT.
168 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 6. Firmly press and release the LEARN or TRAINING Gate Operator/Canadian Programming button. The name and color of the button may vary by Canadian radio-frequency laws require transmitter signals to “time-out” (or quit) after several seconds of manufacturer. transmission – which may not be long enough for NOTE: You have 30 seconds in which to initiate the next HomeLink威 to pick up the signal during programming. step after the LEARN button has been pressed.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 169 successfully accepted the frequency signal. The EVIC 1. Place the ignition in the RUN position. display will change from “CHANNEL # TRAINING” to 2. Press and hold the desired HomeLink威 button for “CHANNEL # TRAINED.” 20 seconds until the EVIC display states “CHANNEL # If you unplugged the device for training, plug it back in TRAINING.” Do not release the button. at this time. 3.
170 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 1. This device may not cause harmful interference Troubleshooting Tips If you are having trouble programming HomeLink威, here 2. This device must accept any interference that may be are some of the most common solutions: received including interference that may cause undesired operation • Replace the battery in the original transmitter.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE POWER SUNROOF — IF EQUIPPED The power sunroof switch is located between the sun visors on the overhead console. Power Sunroof Controls 171 WARNING! • Never leave children in a vehicle with the key in the ignition switch (or the ignition in the ACC or RUN position, when using Keyless Go™). Occupants, particularly unattended children, can become entrapped by the power sunroof while operating the power sunroof switch.
172 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Opening Sunroof — Express Press the power sunroof switch rearward and release, and the sunroof will open automatically from any position. The sunroof will open fully and then stop automatically. This is called “Express Open”. During Express Open operation, any movement of the power sunroof switch will stop the sunroof. Closing Sunroof — Express Press the power sunroof switch forward and release, and the sunroof will close automatically from any position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 173 Sunshade Operation Sunroof Maintenance The sunshade can be opened manually. However, the Use only a nonabrasive cleaner and a soft cloth to clean sunshade will open automatically as the sunroof opens. the glass panel. NOTE: The sunshade cannot be closed if the sunroof is Ignition Off Operation The power sunroof switch will remain active for up to open. 60 minutes after the ignition is placed in the OFF posiWind Buffeting tion.
174 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The 12 Volt power outlet next to the ash receiver tray has ELECTRICAL POWER OUTLETS There are two 12 Volt (13 Amp) electrical power outlets power available only when the ignition is placed in the on this vehicle. Both of the power outlets are protected by ACC or RUN position. a fuse. Insert cigar lighter or accessory plug into the power outlets for use to ensure proper operation. NOTE: • To ensure proper operation a MOPAR威 knob and element must be used.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 175 WARNING! Do not place ashes inside the cubby bin located on the center console on vehicle’s not equipped with the ash receiver tray. A fire leading to bodily injury could result. 3 The center console outlet is powered directly from the battery (power available at all times). Items plugged into this outlet may discharge the battery and/or prevent the engine from starting.
176 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! (Continued) CAUTION! (Continued) • Do not touch with wet hands. • Close the lid when not in use and while driving the vehicle. • If this outlet is mishandled, it may cause an electric shock and failure. • Accessories that draw higher power (i.e., coolers, vacuum cleaners, lights, etc.) will degrade the battery even more quickly. Only use these intermittently and with greater caution.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 177 CUPHOLDERS Rear Seat Cupholders The rear seat cupholders are located in the center armrest Front Seat Cupholders between the rear seats. The cupholders are positioned The cupholders are located in the forward edge of the forward in the armrest and side-by-side to provide center console. convenient access to beverage cans or bottles while maintaining a resting place for the rear occupants elbows.
178 UNDERSTANDING THE FEATURES OF YOUR VEHICLE STORAGE Console Features The center console contains two shift bezel cubby bins with rubber mats for holding small items. For vehicles not equipped with navigation radio, the console also contains an extra storage bin located below the climate control, which holds up to four CD jewel cases. Two separate storage compartments are also located underneath the armrest.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE The top compartment holds small items, such as a pen and note pad, while the larger bottom compartment will hold CDs and alike. The bottom compartment also contains a 12 Volt power outlet and a molded-in coin holder (designed to hold various size coins). A slot in the left and right side of the top compartment provides clearance for power cords to pass conveniently out of the bin with the lid closed.
180 UNDERSTANDING THE FEATURES OF YOUR VEHICLE When the seatback is folded to the upright position, make sure it is latched by strongly pulling on the top of the seatback above the seat strap. WARNING! • Be certain that the seatback is securely locked into position. If the seatback in not securely locked into position, the seat will not provide the proper stability for child seats and/or passengers. An improperly latched seat could cause serious injury.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE REAR WINDOW FEATURES 181 CAUTION! (Continued) Rear Window Defroster The rear window defroster button is located on the climate control. Press this button to turn on the rear window defroster and the heated outside mirrors (if equipped). An indicator in the button will illuminate when the rear window defroster is on. The rear window defroster automatically turns off after approximately 10 minutes.
UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS 䡵 Instrument Panel Features . . . . . . . . . . . . . . . 187 ▫ Keyless Go Display — If Equipped . . . . . . . . 212 䡵 Instrument Cluster ▫ Driver-Selectable Surround Sound (DSS) – If Equipped . . . . . . . . . . . . . . . . . . . . . . . 212 . . . . . . . . . . . . . . . . . . . . 188 䡵 Instrument Cluster Descriptions . . . . . . . . . . . 189 䡵 Electronic Vehicle Information Center (EVIC) . . 199 ▫ Electronic Vehicle Information Center (EVIC) Displays . .
184 UNDERSTANDING YOUR INSTRUMENT PANEL 䡵 Media Center 730N/430 (RER/REN/RBZ) — AM/FM Stereo Radio And CD/DVD/HDD/ NAV — If Equipped . . . . . . . . . . . . . . . . . . . . 222 ▫ Operating Instructions — Voice Command System — If Equipped . . . . . . . . . . . . . . . . . 222 ▫ Operating Instructions — Uconnect™ phone — If Equipped . . . . . . . . 222 ▫ Clock Setting Procedure — RBZ Radio . . . . . 222 ▫ Clock Setting Procedure — RER/REN Radio . . . . . . . . . . . . . . . . . . . . .
UNDERSTANDING YOUR INSTRUMENT PANEL ▫ Using This Feature . . . . . . . . . . . . . . . . . . . 248 ▫ Controlling The iPod威 Using Radio Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . 248 ▫ Play Mode . . . . . . . . . . . . . . . . . . . . . . . . . 249 ▫ List Or Browse Mode . . . . . . . . . . . . . . . . . 250 䡵 Uconnect™ Multimedia (Satellite Radio) — If Equipped (REN/RER/RES Radios Only) . . 252 185 ▫ Operating Instructions - Uconnect™ Multimedia (Satellite) Mode . . . . . . . . . . . .
186 UNDERSTANDING YOUR INSTRUMENT PANEL 䡵 Climate Controls . . . . . . . . . . . . . . . . . . . . . . 263 ▫ Automatic Temperature Control . . . . . . . . . . 263 ▫ Operating Tips . . . . . . . . . . . . . . . . . . . . . .
UNDERSTANDING YOUR INSTRUMENT PANEL 187 INSTRUMENT PANEL FEATURES 4 1 2 3 4 5 6 — Air Outlet — Instrument Cluster — Hazard Switch — Analog Clock — Electronic Stability Program Off Button* — Glove Compartment 7 — Radio 8 — Climate Control 9 — Heated Seat Switch* 10 — Power Outlet 11 — Ash Tray* 12 — Storage Compartment* 13 — Ignition Switch 14 — Hood Release 15 — Trunk Release Button 16 — Headlight Switch * If Equipped
188 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER
UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER DESCRIPTIONS 189 NOTE: • A continuous chime will sound if the vehicle is driven more than 1 mile (1.6 km) with either turn signal on. 1. Electronic Speed Control / Adaptive Cruise Control (ACC) Indicator Light — If Equipped This light will turn on when the electronic • Check for an inoperative outside light bulb if either indicator flashes at a rapid rate. speed control or Adaptive Cruise Control (ACC) is ON. 5. Speedometer Indicates vehicle speed.
190 UNDERSTANDING YOUR INSTRUMENT PANEL mileage was before the repair or service. It is a good idea for you to make a record of the odometer reading before the repair/service, so that you can be sure that it is properly reset, or that the door jamb sticker is accurate if the odometer must be reset at zero. A loose, improperly installed, or damaged fuel filler cap may also turn on the Malfunction Indicator Light (MIL). 7.
UNDERSTANDING YOUR INSTRUMENT PANEL If the ABS light remains on or turns on while driving, then the Anti-Lock portion of the brake system is not functioning and service is required. However, the conventional brake system will continue to operate normally if the BRAKE warning light is not on. If the ABS light is on, the brake system should be serviced as soon as possible to restore the benefits of Anti-Lock brakes.
192 UNDERSTANDING YOUR INSTRUMENT PANEL while driving, then have the system inspected at an authorized dealer as soon as possible. Refer to “Occupant Restraints” in “Things To Know Before Starting Your Vehicle” for further information. system. A leak in either half of the dual brake system is indicated by the Brake Warning Light which will turn on when the brake fluid level in the master cylinder has dropped below a specified level. 12.
UNDERSTANDING YOUR INSTRUMENT PANEL 193 Vehicles equipped with the Anti-Lock Brake System 13. Electronic Stability Program (ESP) / Traction (ABS), are also equipped with Electronic Brake Force Control System (TCS) Indicator Light If this indicator light flashes during acceleraDistribution (EBD). In the event of an EBD failure, the tion, ease up on the accelerator and apply as Brake Warning Light will turn on along with the ABS little throttle as possible. Adapt your speed and Light.
194 UNDERSTANDING YOUR INSTRUMENT PANEL CAUTION! WARNING! Driving with a hot cooling system could damage your vehicle. If the temperature gauge reads 240°F (116°C) or greater, pull over and stop the vehicle. Idle the vehicle with the air conditioner turned off until the pointer drops back into the normal range 200– 230°F (93–110°C). If the pointer remains at 240°F (116°C) or greater and you hear a chime, turn the engine OFF immediately, and call for service. A hot engine cooling system is dangerous.
UNDERSTANDING YOUR INSTRUMENT PANEL 195 19. Vehicle Security Light — If Equipped 16. High Beam Light This light will turn on when the high beam This light will flash at a fast rate for approximately 15 seconds, when the vehicle security headlights are ON. Push the multifunction lever alarm is arming, and then will flash slowly away from the steering wheel to switch the headlights to until the vehicle is disarmed. high beam. 17. Shift Lever Indicator 20.
196 UNDERSTANDING YOUR INSTRUMENT PANEL turn off. If the light remains lit with the engine running, your vehicle will usually be drivable. However, see an authorized dealer for service as soon as possible. If the light is flashing when the engine is running, immediate service is required. In this case, you may experience reduced performance, an elevated/rough idle or engine stall, and your vehicle may require towing.
UNDERSTANDING YOUR INSTRUMENT PANEL 197 Your vehicle has also been equipped with a TPMS CAUTION! malfunction indicator to indicate when the system is not operating properly. The TPMS malfunction indicator is The TPMS has been optimized for the original combined with the low tire pressure telltale. When the equipment tires and wheels.
198 UNDERSTANDING YOUR INSTRUMENT PANEL non-essential electrical devices or increase engine speed (if at idle). If the charging system light remains on, it means that the vehicle is experiencing a problem with the charging system. Obtain SERVICE IMMEDIATELY. See an authorized dealer. If jump starting is required, refer to “Jump Starting Procedures” in “What To Do In Emergencies”. 24. Malfunction Indicator Light (MIL) The Malfunction Indicator Light (MIL) is part of an onboard diagnostic system called OBD.
UNDERSTANDING YOUR INSTRUMENT PANEL WARNING! A malfunctioning catalytic converter, as referenced above, can reach higher temperatures than in normal operating conditions. This can cause a fire if you drive slowly or park over flammable substances such as dry plants or wood or cardboard, etc. This could result in death or serious injury to the driver, occupants or others. 25. Oil Pressure Warning Light This light indicates low engine oil pressure.
200 UNDERSTANDING YOUR INSTRUMENT PANEL • Vehicle information warning message displays • Tire Pressure Monitor System (if equipped) • Personal Settings (Customer-Programmable Features) • Compass display • Outside temperature display • Trip computer functions • Uconnect™ Phone displays (if equipped) • Uconnect™ gps screens (if equipped) Electronic Vehicle Information Center (EVIC) • Audio mode display This system conveniently allows the driver to select a • Surround Sound modes (if equipped with Drivervari
UNDERSTANDING YOUR INSTRUMENT PANEL 201 The system allows the driver to select information by pressing the following buttons mounted on the steering wheel. Press the SCROLL button to scroll through Trip Functions, Performance Pages (if equipped), Uconnect™ gps (if equipped), System Status Messages, and Personal Settings (CustomerPress and release the MENU button and the SCROLL Programmable Features).
202 UNDERSTANDING YOUR INSTRUMENT PANEL Electronic Vehicle Information Center (EVIC) • Memory System Disabled – Vehicle Not In PARK (with Displays a single chime) When the appropriate conditions exist, the EVIC displays • Memory System Disabled – Seat Belt Buckled (with a the following messages: single chime) • Turn Signal On (with a continuous warning chime if • Personal Settings Not Available – Vehicle Not in PARK the vehicle is driven more than 1 mile [1.
UNDERSTANDING YOUR INSTRUMENT PANEL 203 • ACC Off — When the Adaptive Cruise Control (ACC) • Distance Set — After changing the desired following system is turned off. Refer to “Adaptive Cruise Condistance in the Adaptive Cruise Control (ACC) system, trol (ACC)” in “Understanding The Features Of Your this message will display momentarily. Refer to Vehicle” (if equipped). “Adaptive Cruise Control (ACC)” in “Understanding The Features Of Your Vehicle” (if equipped).
204 UNDERSTANDING YOUR INSTRUMENT PANEL • ACC Blinded — If the Adaptive Cruise Control (ACC) • Adjustable Pedals Disabled – Vehicle In REVERSE system deactivates due to performance limiting con(with a single chime) — only available on vehicles ditions. Refer to “Adaptive Cruise Control (ACC)” in equipped with memory seats. “Understanding The Features Of Your Vehicle” (if • Channel # Transmit equipped).
UNDERSTANDING YOUR INSTRUMENT PANEL 205 • Right Front Low Pressure (with a single chime). Refer • 0-60 mph (0-100 km/h) (if equipped with Performance to information on “Tire Pressure” and “Tire Pressure Pages) Monitor” under “Starting And Operating.” • Braking Distance (if equipped with Performance Pages) • Right Rear Low Pressure (with a single chime). Refer to information on “Tire Pressure” and “Tire Pressure • 1/8 Mile (if equipped with Performance Pages) Monitor” under “Starting And Operating.
206 UNDERSTANDING YOUR INSTRUMENT PANEL Engine Oil Change Indicator System Oil Change Required Your vehicle is equipped with an engine oil change indicator system. The “Oil Change Required” message will flash in the EVIC display for approximately 10 seconds after a single chime has sounded, to indicate the next scheduled oil change interval. The engine oil change indicator system is duty cycle based, which means the engine oil change interval may fluctuate, dependent upon your personal driving style.
UNDERSTANDING YOUR INSTRUMENT PANEL 207 Press the SCROLL button to cycle through all the Trip NOTE: Significant changes in driving style or vehicle loading will greatly affect the actual drivable distance of Computer functions. the vehicle, regardless of the DTE displayed value. The Trip Functions mode displays the following informaWhen the DTE value is less than 30 miles (48 km) tion. estimated driving distance, the DTE display will change • Average Fuel Economy to a text display of ⬙LOW FUEL.
208 UNDERSTANDING YOUR INSTRUMENT PANEL • Elapsed Time Performance Pages — If Equipped Shows the total elapsed time of travel since the last reset WARNING! when the ignition switch is in the ACC position. Elapsed time will increment when the ignition switch is in the ON Measurement of vehicle statistics with the Perforor START position.
UNDERSTANDING YOUR INSTRUMENT PANEL • 1/8 Mile • 1/4 Mile • Instantaneous G-Force • Peak G-Force • Digital Speedometer 209 • The feature will “ready” when the vehicle speed is at 0 mph (0 km/h). The word “READY” will flash when conditions are met for the event to begin. • Dashes will display if the vehicle fails to reach 60 mph (100 km/h) in less then 10 seconds. • The time will continue to display until the FUNCTION SELECT button is pressed.
210 UNDERSTANDING YOUR INSTRUMENT PANEL • This feature will only function when applying the 1/8 Mile, 1/4 Mile When selected, this screen displays the time it takes the brakes at speeds above 30 mph (48 km/h). vehicle to travel 1/8 mile (1/4 mile) within 30 seconds • Engaging the parking brake will disable this feature. and the vehicle’s speed when it reaches 1/8 mile (1/ • The word “READY” will flash when conditions are 4 mile). met for the event to begin.
UNDERSTANDING YOUR INSTRUMENT PANEL 211 • To clear the vehicle’s best 1/8 mile (1/4 mile) run, • Pressing the FUNCTION SELECT button will clear the press and hold the FUNCTION SELECT button for peak force values. five seconds. Digital Speedometer Instantaneous G-Force When selected, this screen displays vehicle speed and When selected, this screen displays the current G-Force records top speed.
212 UNDERSTANDING YOUR INSTRUMENT PANEL Keyless Go Display — If Equipped When the ENGINE START/STOP button is pressed to change ignition switch positions, the Keyless Go icon momentarily appears in the EVIC display showing the new ignition switch position. The round symbol in the middle rotates to point at the new ignition switch position. If desired, the ignition switch position graphic can be set to be constantly visible by pressing the EVIC MENU button until the display appears.
UNDERSTANDING YOUR INSTRUMENT PANEL • Video Surround • Audio Surround 213 displayed temperature, therefore temperature readings are not updated when the vehicle is not moving. Automatic Compass Calibration This compass is self-calibrating, which eliminates the need to set the compass manually. When the vehicle is new, the compass may appear erratic and the EVIC will display “CAL” until the compass is calibrated.
214 UNDERSTANDING YOUR INSTRUMENT PANEL 3. Press the SCROLL button until “Calibrate Compass” NOTE: Keep magnetic materials away from the top of the instrument panel, such as iPod’s, Cell Phones, Lapdisplays in the EVIC. tops and Radar Detectors. This is where the compass 4. Press and release the FUNCTION SELECT button to module is located, and it can cause interference with the start the calibration. The message “CAL” will display in compass sensor, and it may give false readings. the EVIC. 5.
UNDERSTANDING YOUR INSTRUMENT PANEL 215 2. Press and hold the HOME button for approximately used to select an item, and the AUDIO MODE button can be used to return to the previous menu. When the Map two seconds. display is active, pressing the FUNCTION SELECT but3. Press the SCROLL button until “Compass Variance” ton will change the Navigation Unit Display to the Menu. message and the last variance zone number displays in Turn-by-Turn Directions the EVIC.
216 UNDERSTANDING YOUR INSTRUMENT PANEL System Warnings (Customer Information Features) Press and release the MENU button until “SYSTEM WARNINGS” displays in the EVIC. Then, press the SCROLL button to display anyone of the following choices. • Oil Temperature Shows the actual oil temperature. • Oil Pressure Shows the actual oil pressure. Press and release the MENU button until Personal Settings displays in the EVIC.
UNDERSTANDING YOUR INSTRUMENT PANEL “Lock Doors Automatically at 15 mph (24 km/h)” When ON is selected, all doors will lock automatically when the vehicle reaches a speed of 15 mph (24 km/h). To make your selection, press and release the FUNCTION SELECT button until “ON” or “OFF” appears. 217 the doors will unlock on the first press of the RKE transmitter UNLOCK button. To make your selection, press and release the FUNCTION SELECT button until “Driver Door 1st Press” or “All Doors 1st Press” appears.
218 UNDERSTANDING YOUR INSTRUMENT PANEL Each memory profile contains desired position settings for the driver seat, side mirror, adjustable pedals (if equipped), and power tilt and telescopic steering column (if equipped), and a set of desired radio station presets. When OFF is selected, only the memory switch on the driver’s door panel will recall memory profiles. To make your selection, press and release the FUNCTION SELECT button until “ON” or “OFF” appears.
UNDERSTANDING YOUR INSTRUMENT PANEL 219 door. Refer to “Driver Memory Seat” in “Understanding NOTE: Turning the headlights on during the daytime causes the instrument panel lights to dim. To increase the The Features Of Your Vehicle” for further information. brightness, refer to “Lights” in “Understanding The “Flash Lights with Remote Key Lock” Features Of Your Vehicle”.
220 UNDERSTANDING YOUR INSTRUMENT PANEL “Turn Headlights On with Remote Key Unlock” When this feature is selected, the headlights will activate and remain on for up to 90 seconds when the doors are unlocked with the RKE transmitter. To make your selection, press and release the FUNCTION SELECT button until “OFF,” “30 sec.,” “60 sec.,” or “90 sec.” appears. “Confirmation of Voice Commands” — If Equipped When ON is selected, all voice commands from the Uconnect™ system are confirmed.
UNDERSTANDING YOUR INSTRUMENT PANEL 221 “Display Units of Measure in” The EVIC, odometer, and navigation system (if equipped) can be changed between English and Metric units of measure. To make your selection, press and release the FUNCTION SELECT button until “ENGLISH” or “METRIC” appears. “Automatic High Beams” — If Equipped When this feature is selected, the high beam headlights will deactivate automatically under certain conditions.
222 UNDERSTANDING YOUR INSTRUMENT PANEL MEDIA CENTER 730N/430 (RER/REN/RBZ) — AM/FM STEREO RADIO AND CD/DVD/HDD/NAV — IF EQUIPPED NOTE: The sales code is located on the lower right side of the unit’s faceplate. Operating Instructions — Uconnect™ Phone — If Equipped Refer to “Uconnect™ Phone” in “Understanding The Features Of Your Vehicle”. Clock Setting Procedure — RBZ Radio The REN, RER and RBZ radios contain a CD/DVD To Manually Set the Clock player, USB port, and a 30-gigabyte hard drive (HDD). 1.
UNDERSTANDING YOUR INSTRUMENT PANEL 223 displayed. To move the minute backward, touch the Show Time if Radio is Off screen where the word “Min” with the arrow pointing When selected, this feature will display the time of day on the touch screen when the radio is turned off. Proceed downward is displayed. as follows to change the current setting: 5. To save the new time setting, touch the screen where 1. Turn on the radio. the word “Save” is displayed. Changing Daylight Savings Time 2.
224 UNDERSTANDING YOUR INSTRUMENT PANEL 3. Touch the screen where the words “Set Time Zone” are To Manually Set the Clock — RER/REN displayed. The time zone selection menu will appear on 1. Turn on the radio. the screen. 2. Touch the screen where the time is displayed. 4. Select a time zone by touching the screen where your selection appears. If you do not see a time zone that you 3.
UNDERSTANDING YOUR INSTRUMENT PANEL 225 6. To save the new time setting, touch the screen where 1. Turn on the radio. the word “Save” is displayed. 2. Touch the screen where the time is displayed. Changing Daylight Savings Time 3. Touch the screen where “User Clock” is displayed, the When selected, this feature will display the time of day in clock setting menu will appear on the screen. daylight savings time. Proceed as follows to change the 4.
226 UNDERSTANDING YOUR INSTRUMENT PANEL 4. Touch the screen where the words “Set Time Zone” are displayed. The time zone selection menu will appear on the screen. 5. Select a time zone by touching the screen where your selection appears. If you do not see a time zone that you want to select, touch the screen where the word “Page” is displayed to view additional time zones in the menu. 6. Touch the screen where the word “Save” is displayed.
UNDERSTANDING YOUR INSTRUMENT PANEL 227 Power Switch/Volume Control (Rotary) TIME Button Push the ON/VOLUME control knob to turn on the Press the TIME button to alternate display of the time radio. Push the ON/VOLUME control knob a second and radio frequency. time to turn off the radio. Clock Setting Procedure Electronic Volume Control 1. Press and hold the TIME button until the hours blink. The electronic volume control turns continuously (360 degrees) in either direction, without stopping. Turning 2.
228 UNDERSTANDING YOUR INSTRUMENT PANEL RW/FF Pressing the RW (Rewind) or FF (Fast Forward) buttons causes the tuner to search for the next frequency in the direction of the arrows. This feature operates in either AM or FM frequencies. Push the rotary TUNE/SCROLL control knob a third time and TREBLE will display. Turn the TUNE/SCROLL control knob to the right or left to increase or decrease the treble tones.
UNDERSTANDING YOUR INSTRUMENT PANEL SET/RND Button — To Set the Pushbutton Memory When you are receiving a station that you wish to commit to pushbutton memory, press the SET/RND button. The symbol SET 1 will now show in the display window. Select the button (1 to 6) you wish to lock onto this station and press and release that button. If a button is not selected within five seconds after pressing the SET/RND button, the station will continue to play but will not be stored into pushbutton memory.
230 UNDERSTANDING YOUR INSTRUMENT PANEL discs (CD-RW), compact discs with MP3 tracks and multisession compact discs with CD and MP3 tracks. Inserting Compact Disc(s) Gently insert one CD into the CD player with the CD label facing up. The CD will automatically be pulled into the CD player and the CD icon will illuminate on the radio display. If a CD does not go into the slot more than 1.0 in (2.5 cm), a disc may already be loaded and must be ejected before a new disc can be loaded.
UNDERSTANDING YOUR INSTRUMENT PANEL EJECT Button - Ejecting a CD Press the EJECT button to eject the CD. If you have ejected a disc and have not removed it within 10 seconds, it will be reloaded. If the CD is not removed, the radio will reinsert the CD but will not play it. A disc can be ejected with the radio and ignition OFF. 231 TIME Button Press this button to change the display from a large CD playing time display to a small CD playing time display.
232 UNDERSTANDING YOUR INSTRUMENT PANEL Press the RND button a second time to stop Random The radio uses the following limits for file systems: Play. • Maximum number of folder levels: 8 Notes on Playing MP3 Files • Maximum number of files: 255 The radio can play MP3 files; however, acceptable MP3 file recording media and formats are limited. When • Maximum number of folders. (The radio display of file names and folder names is limited.
UNDERSTANDING YOUR INSTRUMENT PANEL 233 Multisession disc formats are supported by the radio. rates (VBR) are also supported. The majority of MP3 files Multisession discs may contain combinations of normal use a 44.1 kHz sampling rate and a 192, 160, 128, 96 or CD audio tracks and computer files (including MP3 files). VBR bit rate. Discs created with an option such as ⬙keep disc open after MPEG SpecifiSampling FreBit Rate (kbps) writing⬙ are most likely multisession discs.
234 UNDERSTANDING YOUR INSTRUMENT PANEL Playback of MP3 Files When a medium containing MP3 data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the MP3 files.
UNDERSTANDING YOUR INSTRUMENT PANEL MEDIA CENTER 130 (RES/RSC) — AM/FM STEREO RADIO WITH CD PLAYER (MP3 AUX JACK) AND SIRIUS RADIO 235 Operating Instructions — Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. NOTE: The radio sales code is located on the lower right Power Switch/Volume Control (Rotary) side of the radio faceplate. Push the ON/VOLUME control knob to turn on the radio. Push the ON/VOLUME control knob a second time to turn off the radio.
236 UNDERSTANDING YOUR INSTRUMENT PANEL to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection. Holding either button will bypass stations without stopping until you release it. Phone Button Uconnect™ Phone — If Equipped Press this button to operate the Uconnect™ Phone feature (if equipped). Refer to “Uconnect™ Phone” in “Understanding The Features If Your Vehicle”.
UNDERSTANDING YOUR INSTRUMENT PANEL 237 3. After adjusting the hours, press the right side TUNE/ INFO Button SCROLL control knob to set the minutes. The minutes Press the INFO button for an RDS station (one with call letters displayed). The radio will return a Radio Text will begin to blink. message broadcast from an FM station (FM mode only). 4. Adjust the minutes using the right side TUNE/ SCROLL control knob.
238 UNDERSTANDING YOUR INSTRUMENT PANEL Push the rotary TUNE/SCROLL control knob a second Push the rotary TUNE/SCROLL control knob again to time and MID will display. Turn the TUNE/SCROLL exit setting tone, balance, and fade. control knob to the right or left to increase or decrease the MUSIC TYPE Button mid-range tones. Pressing this button once will turn on the Music Type Push the rotary TUNE/SCROLL control knob a third mode for five seconds. Pressing the MUSIC TYPE button time and TREBLE will display.
UNDERSTANDING YOUR INSTRUMENT PANEL Program Type Classic Rock College Country Foreign Language Information Jazz News Nostalgia Oldies Personality Public Rhythm and Blues Religious Music Religious Talk Rock 16-Digit Character Display Cls Rock College Country Language Inform Jazz News Nostalga Oldies Persnlty Public R&B Rel Musc Rel Talk Rock Program Type Soft Soft Rock Soft Rhythm and Blues Sports Talk Top 40 Weather 239 16-Digit Character Display Soft Soft Rck Soft R&B Sports Talk Top 40 Weather By pr
240 UNDERSTANDING YOUR INSTRUMENT PANEL window. Select the button (1–6) you wish to lock onto this SETUP Button Pressing the SETUP button allows you to select between station and press and release that button. If a button is not selected within five seconds after pressing the SET/ the following items: RND button, the station will continue to play but will not • Set Clock — Pressing the SELECT button will allow be stored into pushbutton memory. you to set the clock.
UNDERSTANDING YOUR INSTRUMENT PANEL 241 Buttons 1 - 6 Inserting Compact Disc(s) These buttons tune the radio to the stations that you Gently insert one CD into the CD player with the CD commit to pushbutton memory (12 AM and 12 FM label facing up. The CD will automatically be pulled into stations). the CD player and the CD icon will illuminate on the radio display. If a CD does not go into the slot more than DISC/AUX Button 1.0 in (2.
242 UNDERSTANDING YOUR INSTRUMENT PANEL CAUTION! (Continued) • Do not use adhesive labels. These labels can peel away and jam the player mechanism. • RES is a single CD player. Do not attempt to insert a second CD if one is already loaded. • Dual-media disc types (one side is a DVD, the other side is a CD) should not be used, and they can cause damage to the player. EJECT Button - Ejecting a CD Press the EJECT button to eject the CD.
UNDERSTANDING YOUR INSTRUMENT PANEL AM/FM Button Press the button to select either AM or FM mode. SET/RND Button (Random Play Button) Press this button while the CD is playing to activate Random Play. This feature plays the selections on the compact disc in random order to provide an interesting change of pace. 243 Supported Media (Disc Types) The MP3 file recording media supported by the radio are CDDA, CD-R, CD-RW, MP3, and CDDA+MP3.
244 UNDERSTANDING YOUR INSTRUMENT PANEL • Maximum number of folders. (The radio display of file names and folder names is limited. For large numbers of files and/or folders, the radio may be unable to display the file name and folder name and will assign a number instead. With a maximum number of files, exceeding 20 folders will result in this display. With 200 files, exceeding 50 folders will result in this display.) Multisession disc formats are supported by the radio.
UNDERSTANDING YOUR INSTRUMENT PANEL MPEG Specification MPEG-1 Audio Layer 3 MPEG-2 Audio Layer 3 Sampling Frequency (kHz) 48, 44.1, 32 24, 22.05, 16 Bit Rate (kbps) 320, 256, 224, 192, 160, 128, 112, 96, 80, 64, 56, 48, 40, 32 160, 128, 144, 112, 96, 80, 64, 56, 48, 40, 32, 24, 16, 8 245 Playback of MP3 Files When a medium containing MP3 data is loaded, the radio checks all files on the medium.
246 UNDERSTANDING YOUR INSTRUMENT PANEL LIST Button (CD Mode for MP3 Play) Pressing the LIST button will bring up a list of all folders on the disc. Scrolling up or down the list is done by turning the TUNE/SCROLL control knob. Selecting a folder by pressing the TUNE/SCROLL control knob will begin playing the files contained in that folder (or the next folder in sequence if the selection does not contain playable files). The folder list will time out after five seconds.
UNDERSTANDING YOUR INSTRUMENT PANEL 247 radio UCI feature, refer to the separate RER, REN, RBZ, TIME Button (Auxiliary Mode) Press this button to change the display to time of day. The RB2 or REZ User’s Manual. UCI is available only if time of day will display for five seconds (when the equipped as an option with these radios. ignition is OFF).
248 UNDERSTANDING YOUR INSTRUMENT PANEL • Connecting an iPod威 to the AUX port located in the • If the iPod威 battery is completely discharged, it may radio faceplate, plays media, but does not use the UCI not communicate with the UCI system until a minifeature to control the connected device. mum charge is attained. Leaving the iPod威 connected to the UCI system may charge it to the required level.
UNDERSTANDING YOUR INSTRUMENT PANEL Once in the UCI (iPod威) mode, iPod威 audio tracks (if available from iPod威) start playing over the vehicle’s audio system. Play Mode When switched to UCI mode, the iPod威 automatically • starts Play mode. In Play mode, use the following buttons on the radio faceplate to control the iPod威 and display • data: • Use the TUNE control knob to select the next or • previous track. • Turning it clockwise (forward) by one click, while playing a track, skips to the next track.
250 UNDERSTANDING YOUR INSTRUMENT PANEL for that track. Pressing the INFO button again jumps to the next screen of data for that track. Once all screens have been viewed, the last INFO button press will go back to the play mode screen on the radio. List Or Browse Mode During Play mode, pressing any of the buttons described below, will bring up List mode. List mode enables scrolling through the list of menus and tracks on the iPod威.
UNDERSTANDING YOUR INSTRUMENT PANEL • During all List modes, the iPod威 displays all lists in “wrap-around” mode. So if the track is at the bottom of the list, just turn the wheel backwards (counter-clockwise) to get to the track faster. • In List mode, the radio PRESET buttons are used as shortcuts to the following lists on the iPod威.
252 UNDERSTANDING YOUR INSTRUMENT PANEL CAUTION! • Leaving the iPod威 (or any supported device) anywhere in the vehicle in extreme heat or cold can alter the operation or damage the device. Follow the device manufacturer’s guidelines. • Placing items on the iPod威, or connections to the iPod威 in the vehicle, can cause damage to the device and/or to the connectors. WARNING! Do not plug in or remove the iPod威 while driving. Failure to follow this warning could result in an accident.
UNDERSTANDING YOUR INSTRUMENT PANEL 253 information, call the toll-free number 888-539-7474, or Sirius ID number will display. The Sirius ID number visit the Sirius web site at www.sirius.com, or at www- display will time out in two minutes. Press any button on the radio to exit this screen. .siriuscanada.ca for Canadian residents.
254 UNDERSTANDING YOUR INSTRUMENT PANEL bikes should be placed as far rearward as possible, within Operating Instructions - Uconnect™ Multimedia the loading design of the rack. Do not place items directly (Satellite) Mode on or above the antenna. NOTE: The ignition switch must be in the ON or ACC position to operate the radio.
UNDERSTANDING YOUR INSTRUMENT PANEL INFO Button Pressing the INFO button will cycle the display information between Artist, Song Title, and Composer (if available). Also, pressing and holding the INFO button for an additional three seconds will make the radio display the Song Title all of the time (press and hold again to return to normal display). 255 MUSIC TYPE Button Pressing this button once will turn on the Music Type mode for five seconds.
256 UNDERSTANDING YOUR INSTRUMENT PANEL the SET button twice and SET 2 will show in the display SETUP Button Pressing the SETUP button allows you to select the window. Each button can be set for SET 1 and SET 2. This allows a total of 12 Satellite channels to be stored into following items: pushbutton memory. The channels stored in SET 2 • Display Sirius ID number — Press the AUDIO/ memory can be selected by pressing the pushbutton SELECT button to display the Sirius ID number. This twice.
UNDERSTANDING YOUR INSTRUMENT PANEL KICKER姞 HIGH PERFORMANCE SOUND SYSTEM WITH DRIVER-SELECTABLE SURROUND (DSS) – IF EQUIPPED 257 any stereo audio source. A new feature of the KICKER威 audio system offers the ability to choose surround sound for any audio source. “Audio Surround” is optimized for front seat passengers for any audio source.
258 UNDERSTANDING YOUR INSTRUMENT PANEL media sources (DVDs, Video CDs, or other video media supported by the radio). Some audio will sound better in DSS modes, others in Stereo mode. When in “Audio Surround” mode, balance is set automatically. Fader control is available to add more surround audio if desired.
UNDERSTANDING YOUR INSTRUMENT PANEL 259 • A battery-powered infrared remote control snaps into a molded compartment in the center console armrest upper storage bin. 4 VES™ Video Screen NOTE: Close the armrest after the LCD screen has been raised to its viewing position.
260 UNDERSTANDING YOUR INSTRUMENT PANEL Audio/Video RCA Jacks (AUX Jacks) on the rear of the center console enable the monitor to display video directly from a video camera, connect video games for display on the screen, or play music directly from an MP3 player. 1. Video in (yellow) 2. Left audio in (white) 3. Right audio in (red) Kicker姞 Mobile Surround (KMS1)姞 – If Equipped The VES™ for this vehicle comes equipped with Kicker Mobile Surround (KMS1).
UNDERSTANDING YOUR INSTRUMENT PANEL 261 The VOLUME button controls the sound level of the sound system. Press the top of the VOLUME button to increase the sound level. VOLUME Press the bottom of the VOLUME button to Button decrease the sound level. Press the AUDIO MODE button to select the Compass/Temp/Audio screen. This screen displays radio and media mode information AUDIO depending on which radio is in the vehicle.
262 UNDERSTANDING YOUR INSTRUMENT PANEL When the EVIC is in the Compass/Temp/ Audio screen, press the FUNCTION SELECT button to operate various radio, media, and FUNCTION Universal Customer Interface (UCI) functions SELECT (i.e., advance presets, select next folder, jump to Button or start playing songs in playlists, etc., depending on which radio is in the vehicle and if equipped with UCI).
UNDERSTANDING YOUR INSTRUMENT PANEL 263 NOTE: If you experience difficulty in playing a particu- Automatic Temperature Control lar disc, it may be damaged (i.e., scratched, reflective coating removed, a hair, moisture or dew on the disc) oversized, or have protection encoding. Try a known good disc before considering disc player service. RADIO OPERATION AND CELLULAR PHONES Under certain conditions, the cellular phone being on in your vehicle can cause erratic or noisy performance from your radio.
264 UNDERSTANDING YOUR INSTRUMENT PANEL Operation of the system is quite simple. Begin by turning the mode control knob (on the right) to AUTO, and place the blower control knob (on the left) to either LO AUTO or HI AUTO. The LO AUTO position should be used for front seat occupants only. The HI AUTO position should be used when more airflow is desired, or when rear seat occupants are present.
UNDERSTANDING YOUR INSTRUMENT PANEL 265 After 10 minutes, the system will return to normal AUTO Manual Operation This system offers a full complement of manual override mode function and the indicator will turn off. features, which consist of blower preferred automatic, NOTE: mode preferred automatic, or blower and mode preferred • The surface of the climate control panel and the top automatic.
266 UNDERSTANDING YOUR INSTRUMENT PANEL
UNDERSTANDING YOUR INSTRUMENT PANEL 267 The operator can override the AUTO mode setting to • Bi-Level change airflow distribution by rotating the mode control Air flows through the outlets located in the instruknob (on the right) to one of the following positions. ment panel and through the outlets located on the floor. Air flows through the registers in the back of the • Defrost center console to the rear seat passengers.
268 UNDERSTANDING YOUR INSTRUMENT PANEL conditioning. An indicator in the button illuminates Attempting to use the recirculation while in these modes will cause the indicator in the control button to blink and when manual compressor operation is selected. then turn off. NOTE: To control the air conditioning manually, the mode selector must be moved out of the AUTO position.
UNDERSTANDING YOUR INSTRUMENT PANEL 269 NOTE: Recirculate without A/C should not be used for Winter Operation Use of the air Recirculation mode during Winter months long periods, as fogging may occur. is not recommended because it may cause window Outside Air Intake fogging. Make sure the air intake, located directly in front of the Vacation Storage windshield, is free of obstructions such as leaves.
270 UNDERSTANDING YOUR INSTRUMENT PANEL Control Setting Suggestions for Various Weather Conditions
STARTING AND OPERATING CONTENTS 䡵 Starting Procedures . . . . . . . . . . . . . . . . . . . . 275 䡵 Automatic Transmission . . . . . . . . . . . . . . . . . 280 ▫ Automatic Transmission . . . . . . . . . . . . . . . 275 ▫ General Information . . . . . . . . . . . . . . . . . . 281 ▫ Keyless Go™ . . . . . . . . . . . . . . . . . . . . . . . 276 ▫ Key Ignition Park Interlock . . . . . . . . . . . . . 283 ▫ Normal Starting . . . . . . . . . . . . . . . . . . . . .
272 STARTING AND OPERATING ▫ Operation . . . . . . . . . . . . . . . . . . . . . . . . . 289 䡵 Electronic Brake Control System . . . . . . . . . . . 300 ▫ General Information . . . . . . . . . . . . . . . . . . 290 ▫ Anti-Lock Brake System (ABS) . . . . . . . . . . . 301 䡵 Driving On Slippery Surfaces . . . . . . . . . . . . . 290 ▫ Traction Control System (TCS) . . . . . . . . . . . 301 ▫ Acceleration . . . . . . . . . . . . . . . . . . . . . . . . 290 ▫ Brake Assist System (BAS) . . . . . . . . .
STARTING AND OPERATING 䡵 Tires — General Information 273 . . . . . . . . . . . . . 317 䡵 Tire Pressure Monitor System (TPMS) . . . . . . . 326 ▫ Tire Pressure . . . . . . . . . . . . . . . . . . . . . . . 317 ▫ Premium System . . . . . . . . . . . . . . . . . . . . 328 ▫ Tire Inflation Pressures . . . . . . . . . . . . . . . . 318 ▫ General Information . . . . . . . . . . . . . . . . . . 332 ▫ Tire Pressures For High Speed Operation . . . 319 䡵 Fuel Requirements . . . . . . . . . . . . . . . . . . .
274 STARTING AND OPERATING ▫ Fuel Filler Cap (Gas Cap) . . . . . . . . . . . . . . 337 ▫ Overloading . . . . . . . . . . . . . . . . . . . . . . . . 341 ▫ Loose Fuel Filler Cap Message . . . . . . . . . . . 339 ▫ Loading . . . . . . . . . . . . . . . . . . . . . . . . . . . 341 䡵 Vehicle Loading . . . . . . . . . . . . . . . . . . . . . . 340 䡵 Trailer Towing . . . . . . . . . . . . . . . . . . . . . . . . 342 ▫ Vehicle Certification Label . . . . . . . . . . . . . .
STARTING AND OPERATING STARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust the inside and outside mirrors, fasten your seat belt, and if present, instruct all other occupants to buckle their seat belts. WARNING! Never leave children alone in a vehicle. Leaving unattended children in a vehicle is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Do not leave the key fob in the ignition switch.
276 STARTING AND OPERATING Do not press the accelerator. Use the Fob with Integrated Key to briefly turn the ignition switch to the START position and release it as soon as the starter engages. The starter motor will continue to run, and it will disengage automatically when the engine is running. If the engine fails to start, the starter will disengage automatically in 10 seconds.
STARTING AND OPERATING 277 NOTE: The ENGINE START/STOP button should only To Turn Off the Engine Using ENGINE be removed or inserted with the ignition in the LOCK START/STOP Button position (OFF position for Keyless Go™). 1. Place the shift lever in PARK, then press and release the ENGINE START/STOP button. Normal Starting Using the ENGINE START/STOP Button 2. The ignition switch will return to the OFF position. NOTE: Normal starting of either a cold or a warm 3.
278 STARTING AND OPERATING NOTE: If the ignition switch is left in the ACC or RUN (engine not running) position and the transmission is in PARK, the system will automatically time out after 60 minutes of inactivity and the ignition will switch to the OFF position. Keyless Go™ Functions – With Driver’s Foot OFF the Brake Pedal Pedal (In PARK or NEUTRAL Position) The Keyless Go™ feature operates similar to an ignition switch. It has four positions, OFF, ACC, RUN and START.
STARTING AND OPERATING WARNING! (Continued) • Do not attempt to push or tow your vehicle to get it started. Vehicles equipped with an automatic transmission cannot be started this way. Unburned fuel could enter the catalytic converter and once the engine has started, ignite and damage the converter and vehicle. If the vehicle has a discharged battery, booster cables may be used to obtain a start from a booster battery or the battery in another vehicle.
280 STARTING AND OPERATING CAUTION! WARNING! To prevent damage to the starter, wait 10 to 15 seconds before trying again. Remember to disconnect the cord before driving. Damage to the 110-115 Volt electrical cord could cause electrocution. After Starting The idle speed is controlled automatically and it will AUTOMATIC TRANSMISSION decrease as the engine warms up. ENGINE BLOCK HEATER — IF EQUIPPED The engine block heater warms the engine, and permits quicker starts in cold weather.
STARTING AND OPERATING CAUTION! (Continued) • Do not shift from REVERSE, PARK, or NEUTRAL into any forward gear when the engine is above idle speed. • Before shifting into any gear, make sure your foot is firmly on the brake pedal. WARNING! It is dangerous to move the shift lever out of PARK or NEUTRAL if the engine speed is higher than idle speed. If your foot is not firmly on the brake pedal, the vehicle could accelerate quickly forward or in reverse.
282 STARTING AND OPERATING NOTE: • After selecting any driving position, wait a moment to allow the gear to engage fully before accelerating, especially when the engine is cold. The shift lever is automatically locked while in the PARK position. To move the shift lever out of the PARK position, the brake pedal must be firmly pressed before the shift lock will release.
STARTING AND OPERATING WARNING! Unintended movement of a vehicle could injure those in and near the vehicle. As with all vehicles, you should never exit a vehicle while the engine is running. Before exiting a vehicle, you should always shift the transmission into PARK, remove the key fob from the ignition, and apply the parking brake. Once the key fob is removed from the ignition, the shift lever is locked in the PARK position, securing the vehicle against unwanted movement.
284 STARTING AND OPERATING must be turned to the ON or START position (engine is running or not) and the brake pedal must be pressed. Brake/Transmission Interlock Manual Override There is an override for the BTSI that allows you to move the shift lever out of the PARK position if an electrical system malfunction occurs (i.e., dead battery). To access the override, remove the rubber tray from the storage bin located to the right of the shift lever.
STARTING AND OPERATING 285 With Keyless Go™ If the engine is running, press the START/STOP button to turn it off. Release the brake pedal and press the START/ STOP button once or twice to go to the ACC or RUN position. Do not start the engine. Then, follow the instructions shown above to activate the override. Five-Speed Automatic Transmission Shifting from DRIVE to PARK or REVERSE should be done only after the accelerator pedal is released and the vehicle is stopped.
286 STARTING AND OPERATING When parking on a flat surface, place the shift lever in the • When shifting into PARK, move the shift lever all the PARK position first, and then apply the parking brake. way forward and left until it stops and is fully seated. When parking on a hill, it is important to set the parking • Look at the shift indicator display on the instrument panel to ensure it is in the PARK position.
STARTING AND OPERATING NEUTRAL This range is used when vehicle is standing for prolonged periods with engine running. Engine may be started in this range. Set the parking brake if you must leave the vehicle. CAUTION! Coasting the vehicle or driving for any other reason with the shift lever in NEUTRAL can result in transmission damage. WARNING! Do not coast in NEUTRAL and never turn off the ignition to coast down a hill.
288 STARTING AND OPERATING temperature as well as vehicle speed. This feature im- 1. Stop the vehicle. proves warm up time of the engine and transmission to 2. Move the shift lever into the PARK position. achieve maximum efficiency. 3. Turn the engine off. Temporary Transmission Limp Home Mode The transmission is monitored for abnormal conditions. 4. Wait approximately 10 seconds. If a condition is detected that could result in transmission 5. Restart the engine.
STARTING AND OPERATING 289 If the problem has been momentary, the transmission can NOTE: • In AutoStick威 mode, the transmission will shift up and be reset to regain all forward gears. down when the driver manually moves the shift lever AUTOSTICK姞 right (D+) or left (D-). AutoStick威 is a driver-interactive transmission that offers manual gear shifting to provide you with more control of • An “UPSHIFT” message will appear in the Electronic Vehicle Information Center (EVIC) portion of the inthe vehicle.
290 STARTING AND OPERATING for at least one second. The transmission will now • Transmission shifting will be more crisp/abrupt when operate automatically, shifting between the five available AutoStick威 is engaged. gears. DRIVING ON SLIPPERY SURFACES General Information Acceleration • You can start out in first or second gear. The system Rapid acceleration on snow covered, wet, or other slipwill ignore attempts to upshift at too low of a vehicle pery surfaces may cause the rear wheels to pull erratispeed.
STARTING AND OPERATING Traction When driving on wet or slushy roads, it is possible for a wedge of water to build up between the tire and road surface. This is known as hydroplaning and may cause partial or complete loss of vehicle control and stopping ability. To reduce this possibility, the following precautions should be observed: 1. Slow down during rainstorms or when the roads are slushy. 2. Slow down if the road has standing water or puddles. 3.
292 STARTING AND OPERATING Shallow Standing Water Although your vehicle is capable of driving through shallow standing water, consider the following Caution and Warning before doing so. CAUTION! • Always check the depth of the standing water before driving through it. Never drive through standing water that is deeper than the bottom of the tire rims mounted on the vehicle.
STARTING AND OPERATING WARNING! • Driving through standing water limits your vehicle’s traction capabilities. Do not exceed 5 mph (8 km/h) when driving through standing water. • Driving through standing water limits your vehicle’s braking capabilities, which increases stopping distances. Therefore, after driving through standing water, drive slowly and lightly press on the brake pedal several times to dry the brakes.
294 STARTING AND OPERATING • Upon initial start-up in cold weather, the power steering pump may make noise for a short amount of time. This is due to the cold, thick fluid in the steering system. This noise should be considered normal, and it does not in any way damage the steering system. WARNING! Continued operation with reduced power steering assist could pose a safety risk to yourself and others. Service should be obtained as soon as possible.
STARTING AND OPERATING WARNING! Fluid level should be checked on a level surface and with the engine off to prevent injury from moving parts and to ensure accurate fluid level reading. Do not overfill. Use only manufacturer’s recommended power steering fluid. 295 The foot operated parking brake is located below the lower left corner of the instrument panel. To apply the park brake, firmly push the park brake pedal fully.
296 STARTING AND OPERATING When the parking brake is applied with the ignition make it difficult to move the shift lever out of PARK. The switch in the ON position, the “Brake Warning Light” in parking brake should always be applied whenever the driver is not in the vehicle. the instrument cluster will illuminate. NOTE: • When the parking brake is applied and the transmission is placed in gear, the “Brake Warning Light” will flash. If vehicle speed is detected, a chime will sound to alert the driver.
STARTING AND OPERATING WARNING! (Continued) • Be sure the parking brake is fully disengaged before driving; failure to do so can lead to brake failure and an accident. • Always fully apply the parking brake when leaving your vehicle, or it may roll and cause damage or injury. Also be certain to leave the transmission in PARK. Failure to do so may allow the vehicle to roll and cause damage or injury.
298 STARTING AND OPERATING Anti-Lock Brake System The Anti-Lock Brake System (ABS) provides increased vehicle stability and brake performance under most braking conditions. The system automatically “pumps” the brakes during severe braking conditions to prevent wheel lock-up. ABS is activated during braking under certain road or stopping conditions. ABS-inducing conditions can include ice, snow, gravel, bumps, railroad tracks, loose debris, or panic stops.
STARTING AND OPERATING 299 WARNING! WARNING! (Continued) • The Anti-Lock Brake System contains sophisticated electronic equipment that may be susceptible to interference caused by improperly installed or high output radio transmitting equipment. This interference can cause possible loss of anti-lock braking capability. Installation of such equipment should be performed by qualified professionals. • Pumping of the anti-lock brakes will diminish their effectiveness and may lead to an accident.
300 STARTING AND OPERATING All vehicle wheels and tires must be the same size and Light” does not come on when the ignition switch is type and tires must be properly inflated to produce turned to the ON position, have the bulb repaired as soon as possible. accurate signals for the computer. Anti-Lock Brake Light The “Anti-Lock Brake Light” monitors the antilock brake system. The light will come on when the ignition switch is turned to the ON position and may stay on for as long as four seconds.
STARTING AND OPERATING Anti-Lock Brake System (ABS) This system aids the driver in maintaining vehicle control under adverse braking conditions by controlling hydraulic brake pressure. This prevents wheel lock-up to help avoid skidding on slippery surfaces during braking. Refer to “Anti-Lock Brake System” in “Starting and Operating” for further information.
302 STARTING AND OPERATING Brake Assist System (BAS) This system complements the ABS by optimizing the vehicle braking capability during emergency braking maneuvers. This system detects an emergency braking situation by sensing the rate and amount of brake application and then applies optimum pressure to the brakes. This can help reduce braking distances. Applying the brakes very quickly results in the best BAS assistance.
STARTING AND OPERATING 303 power may also be reduced to assist in counteracting the flashes when TCS is active. If the “ESP/TCS Indicator condition of oversteer or understeer and help the vehicle Light” begins to flash during acceleration, ease up on the accelerator and apply as little throttle as possible. Be sure maintain the desired path. to adapt your speed and driving to the prevailing road The ESP uses sensors in the vehicle to determine the path conditions.
304 STARTING AND OPERATING switch and the “ESP/TCS Indicator Light” will illuminate. To turn the ESP ON again, momentarily press the ESP On “ESP OFF” switch and the “ESP/TCS Indicator Light” This is the normal operating mode for the ESP. Whenever will turn off. the vehicle is started, the ESP system will be in this mode. This mode should be used for most driving situations.
STARTING AND OPERATING stopped with the engine running. After five seconds, a chime will sound, the “ESP/TCS Indicator Light” will illuminate, and the ⬙ESP OFF⬙ message will display in the vehicle odometer. Press and release the TRIP ODOMETER button located on the instrument cluster to clear this message. The “ESP OFF” message may appear in the Electronic Vehicle Information Center (EVIC).
306 STARTING AND OPERATING WARNING! With the ESP switched OFF, the enhanced vehicle stability offered by ESP is unavailable. In an emergency evasive maneuver, the ESP system will not engage to assist in maintaining stability. The “Full Off” ESP mode is intended for off-highway or offroad only. Synchronizing ESP The Malfunction Indicator Light for the ESP is combined with BAS indicator.
STARTING AND OPERATING 307 NOTE: TIRE SAFETY INFORMATION • The “ESP/TCS Indicator Light” and the “ESP/BAS Tire Markings Malfunction Indicator Light” will turn on momentarily each time the ignition switch is turned to the ON position. • Each time the ignition switch is turned to the ON position, the ESP System will be ON even if it was turned OFF previously. • The ESP Control System will make buzzing or clicking sounds when it is active.
308 STARTING AND OPERATING NOTE: • Temporary spare tires are high-pressure compact • P (Passenger) - Metric tire sizing is based on U.S. spares designed for temporary emergency use only. design standards. P-Metric tires have the letter “P” Tires designed to this standard have the letter “T” molded into the sidewall preceding the size designamolded into the sidewall preceding the size designation. Example: P215/65R15 95H. tion. Example: T145/80D18 103M.
STARTING AND OPERATING 309 Tire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standards ⴖ....blank....ⴖ = Passenger car tire based on European design standards LT = Light truck tire based on U.S. design standards T = Temporary spare tire 31 = Overall diameter in inches (in) 215 = Section width in millimeters (mm) 65 = Aspect ratio in percent (%) — Ratio of section height to section width of tire 10.
310 STARTING AND OPERATING EXAMPLE: Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry H = Speed Symbol — A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions — The maximum speed corresponding to the speed symbol should only be achieved under specified operating conditions (i.e.
STARTING AND OPERATING Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire, however, the date code may only be on one side. Tires with white sidewalls will have the full TIN, including the date code, located on the white sidewall side of the tire. 311 Look for the TIN on the outboard side of black sidewall tires as mounted on the vehicle. If the TIN is not found on the outboard side, then you will find it on the inboard side of the tire.
312 STARTING AND OPERATING Tire Terminology and Definitions Term B-Pillar Cold Tire Pressure Maximum Inflation Pressure Recommended Inflation Pressure Tire Placard Definition The vehicle B-Pillar is a structural member of the body located between the front and rear door (of a four-door vehicle) running from the sill to the roof. Cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least 3 hours, or driven less than 1 mile (1.
STARTING AND OPERATING Tire Loading and Tire Pressure 313 Tire and Loading Information Placard Tire Placard Location NOTE: The proper cold tire inflation pressure is listed on the driver’s side B-Pillar.
314 STARTING AND OPERATING To determine the maximum loading conditions of your vehicle, locate the statement “The combined weight of occupants and cargo should never exceed XXX lbs or XXX kg” on the Tire and Loading Information placard. Loading The combined weight of occupants, cargo/luggage and The vehicle maximum load on the tire must not exceed trailer tongue weight (if applicable) should never exceed the load carrying capacity of the tire on your vehicle. You the weight referenced here.
STARTING AND OPERATING 315 4. The resulting figure equals the available amount of NOTE: cargo and luggage load capacity. For example, if “XXX” • The following table shows examples on how to calculate total load, cargo/luggage, and towing capacities amount equals 1,400 lbs (635 kg) and there will be five of your vehicle with varying seating configurations 150 lb (68 kg) passengers in your vehicle, the amount of and number and size of occupants.
316 STARTING AND OPERATING
STARTING AND OPERATING WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. TIRES — GENERAL INFORMATION Tire Pressure Proper tire inflation pressure is essential to the safe and satisfactory operation of your vehicle.
318 STARTING AND OPERATING WARNING! (Continued) • Unequal tire pressures from one side of the vehicle to the other can cause the vehicle to drift to the right or left. • Always drive with each tire inflated to the recommended cold tire inflation pressure. Economy Improper inflation pressures can cause uneven wear patterns to develop across the tire tread. These abnormal wear patterns will reduce tread life resulting in a need for earlier tire replacement.
STARTING AND OPERATING CAUTION! After inspecting or adjusting the tire pressure, always reinstall the valve stem cap. This will prevent moisture and dirt from entering the valve stem, which could damage the valve stem. 319 Tire pressures change by approximately 1 psi (7 kPa) per 12°F (7°C) of air temperature change. Keep this in mind when checking tire pressure inside a garage, especially in the Winter.
320 STARTING AND OPERATING loading may be required for high-speed vehicle opera- Radial Ply Tires tion. Refer to original equipment or an authorized tire WARNING! dealer for recommended safe operating speeds, loading and cold tire inflation pressures. Combining radial ply tires with other types of tires on your vehicle will cause your vehicle to handle WARNING! poorly. The instability could cause an accident. AlHigh speed driving with your vehicle under maxiways use radial ply tires in sets of four.
STARTING AND OPERATING 321 WARNING! Fast spinning tires can be dangerous. Forces generated by excessive wheel speeds may cause tire damage or failure. A tire could explode and injure someone. Do not spin your vehicle’s wheels faster than 30 mph (48 km/h) or for more than 30 seconds continuously when you are stuck, and do not let anyone near a spinning wheel, no matter what the speed.
322 STARTING AND OPERATING Life of Tire Replacement Tires The service life of a tire is dependent upon varying The tires on your new vehicle provide a balance of many factors including, but not limited to: characteristics. They should be inspected regularly for wear and correct cold tire inflation pressure. The manu• Driving style facturer strongly recommends that you use tires equiva• Tire pressure lent to the originals in size, quality and performance when replacement is needed.
STARTING AND OPERATING 323 WARNING! WARNING! (Continued) • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change suspension dimensions and performance characteristics, resulting in changes to steering, handling, and braking of your vehicle. This can cause unpredictable handling and stress to steering and suspension components. You could lose control and have an accident resulting in serious injury or death.
324 STARTING AND OPERATING These effects can be reduced by timely rotation of tires. The benefits of rotation are especially worthwhile with aggressive tread designs such as those on all season type tires. Rotation will increase tread life, help to maintain mud, snow, and wet traction levels, and contribute to a Snow tires generally have lower speed ratings than what smooth, quiet ride.
STARTING AND OPERATING 325 Tire Rotation – Standard Tires Tire Rotation – All Season Tires The suggested rotation method is the “side-to-side” as The suggested rotation method for vehicles equipped shown in the following diagram. with all season tires is the “forward-cross” as shown in the following diagram.
326 STARTING AND OPERATING TIRE PRESSURE MONITOR SYSTEM (TPMS) The Tire Pressure Monitor System (TPMS) will warn the driver of a low tire pressure based on the vehicle recommended cold placard pressure. The TPMS will warn the driver of a low tire pressure if the tire pressure falls below the low-pressure warning limit for any reason, including low temperature effects and natural pressure loss through the tire. The tire pressure will vary with temperature by about 1 psi (6.9 kPa) for every 12°F (6.5°C).
STARTING AND OPERATING For example, your vehicle may have a recommended cold (parked for more than three hours) placard pressure of 30 psi (207 kPa). If the ambient temperature is 68°F (20°C) and the measured tire pressure is 27 psi (186 kPa), a temperature drop to 20°F (-7°C) will decrease the tire pressure to approximately 26 psi (179 kPa). This tire pressure is sufficiently low enough to turn ON the TPM Telltale Light.
328 STARTING AND OPERATING NOTE: • Seasonal temperature changes will affect tire pressure, • The TPMS is not intended to replace normal tire care and the TPMS will monitor the actual tire pressure in and maintenance or to provide warning of a tire failure the tire. or condition. Premium System • The TPMS should not be used as a tire pressure gauge The Tire Pressure Monitor System (TPMS) uses wireless while adjusting your tire pressure.
STARTING AND OPERATING 329 • Various TPMS messages, which display in the Electronic Vehicle Information Center (EVIC), and • TPM Telltale Light. The matching full size spare wheel and tire assembly (if equipped) has a TPM sensor. The full size spare can be used in place of any of the four road tires. A spare with a pressure below the low-pressure limit will not cause the TPM Telltale Light to illuminate or the chime to sound.
330 STARTING AND OPERATING turn off. The vehicle may need to be driven for up to 20 minutes above 15 mph (25 km/h) in order for the TPMS to receive this information. Check TPMS Warning If a system fault is detected, the TPM Telltale Light will flash on and off for 75 seconds and then remain on solid. The system fault will also sound a chime.
STARTING AND OPERATING 331 1. Signal interference due to electronic devices or driving EVIC will display a low pressure message and a graphic next to facilities emitting the same radio frequencies as showing the low tire pressure value flashing. the TPM sensors. 3. After driving the vehicle for up to 20 minutes above 2. Installing aftermarket window tinting that contains 15 mph (25 km/h) the TPM Telltale Light will turn OFF, materials that may block radio wave signals.
332 STARTING AND OPERATING 3. After driving the vehicle for up to 20 minutes above 15 mph (25 km/h), the TPM Telltale Light will flash on and off for 75 seconds and then remain on solid. In addition, the EVIC will display a ⬙CHECK TPM SYSTEM⬙ message for three seconds and then display dashes (- -) in place of the pressure value. warning limit in any of the four active road tires.
STARTING AND OPERATING FUEL REQUIREMENTS 6.1L Engine 333 Over 40 auto manufacturers worldwide have issued and endorsed consistent gasoline specifications (the Worldwide Fuel Charter, WWFC) which define fuel properties necessary to deliver enhanced emissions, performance, and durability for your vehicle. The manufacturer recommends the use of gasoline that meets the WWFC specifications, if they are available. The 6.
334 STARTING AND OPERATING Gasoline/Oxygenate Blends Some fuel suppliers blend unleaded gasoline with oxygenates such as 10% ethanol, MTBE, and ETBE. Oxygenates are required in some areas of the country during the winter months to reduce carbon monoxide emissions. Fuels blended with these oxygenates may be used in your vehicle. CAUTION! DO NOT use gasoline containing Methanol or E85 Ethanol.
STARTING AND OPERATING 335 • disconnect and reconnect the battery to reset the therefore, you should ask your gasoline retailer whether the gasoline contains MMT. It is even more important to engine controller memory look for gasoline without MMT in Canada, because MMT More extensive repairs will be required for prolonged can be used at levels higher than those allowed in the exposure to E85 fuel. United States. MMT is prohibited in Federal and California reformulated gasoline.
336 STARTING AND OPERATING Fuel System Cautions CAUTION! (Continued) CAUTION! Follow these guidelines to maintain your vehicle’s performance: • The use of leaded gas is prohibited by Federal law. Using leaded gasoline can impair engine performance and damage the emissions control system. • An out-of-tune engine or certain fuel or ignition malfunctions can cause the catalytic converter to overheat.
STARTING AND OPERATING Carbon Monoxide Warnings 337 WARNING! (Continued) WARNING! Carbon monoxide (CO) in exhaust gases is deadly. Follow the precautions below to prevent carbon monoxide poisoning: • Do not inhale exhaust gases. They contain carbon monoxide, a colorless and odorless gas, which can kill. Never run the engine in a closed area, such as a garage, and never sit in a parked vehicle with the engine running for an extended period.
338 STARTING AND OPERATING NOTE: When removing the fuel filler cap, lay the cap tether in the hook, located on the fuel filler cap door reinforcement. Gas Cap Tether Hook CAUTION! • Damage to the fuel system or emissions control system could result from using an improper fuel tank filler tube cap (gas cap). • A poorly fitting gas cap could let impurities into the fuel system. • A poorly fitting gas cap may cause the “Malfunction Indicator Light (MIL)” to turn on.
STARTING AND OPERATING WARNING! • Never have any smoking materials lit in or near the vehicle when the gas cap is removed or the tank filled. • Never add fuel to the vehicle when the engine is running. • A fire may result if gasoline is pumped into a portable container that is inside of a vehicle. You could be burned. Always place gas containers on the ground while filling. NOTE: • Tighten the gas cap until you hear a “clicking” sound. This is an indication that the gas cap is tightened properly.
340 STARTING AND OPERATING VEHICLE LOADING • Gross Axle Weight Rating (GAWR) rear The load carrying capacity of your vehicle is shown on • Vehicle Identification Number (VIN) the “Vehicle Certification Label.” This information should be used for passenger and luggage loading as • Type of Vehicle indicated. • Month Day and Hour of Manufacture (MDH) Do not exceed the specified Gross Vehicle Weight Rating The bar code allows a computer scanner to read the VIN. (GVWR) or the Gross Axle Weight Rating (GAWR).
STARTING AND OPERATING WARNING! Because the front wheels steer the vehicle, it is important that you do not exceed the maximum front or rear GAWR. A dangerous driving condition can result if either rating is exceeded. You could lose control of the vehicle and have an accident. 341 Figure out the weight on the front and rear of the vehicle separately. It is important that you distribute the load evenly over the front and rear axles.
342 STARTING AND OPERATING NOTE: • Refer to the “Vehicle Certification Label” affixed to the rear of the driver’s door for your vehicle’s GVWR and GAWRs. • Refer to the “Tire Placard” for your vehicle’s proper tire pressure. WARNING! If the driveshaft is removed, the vehicle can roll even if the transmission is in PARK, which could cause serious injury or death. The parking brake must be firmly engaged and the wheels chocked during driveshaft removal and installaTRAILER TOWING tion.
WHAT TO DO IN EMERGENCIES CONTENTS 䡵 Hazard Warning Flasher . . . . . . . . . . . . . . . . 344 ▫ Jump-Starting Procedure . . . . . . . . . . . . . . . 357 䡵 If Your Engine Overheats . . . . . . . . . . . . . . . . 344 䡵 Freeing A Stuck Vehicle . . . . . . . . . . . . . . . . . 359 䡵 TIREFIT Kit . . . . . . . . . . . . . . . . . . . . . . . . . 345 䡵 Towing A Disabled Vehicle . . . . . . . . . . . . . . . 360 ▫ TIREFIT Storage . . . . . . . . . . . . . . . . . . . . .
344 WHAT TO DO IN EMERGENCIES NOTE: With extended use the Hazard Warning flasher HAZARD WARNING FLASHER The Hazard Warning flasher switch is located in the may wear down your battery. center of the instrument panel between the center air IF YOUR ENGINE OVERHEATS outlets. In any of the following situations, you can reduce the Press the switch to turn on the Hazard Warning potential for overheating by taking the appropriate acflasher. When the switch is activated, all directional tion.
WHAT TO DO IN EMERGENCIES CAUTION! Driving with a hot cooling system could damage your vehicle. If the temperature gauge reads 240°F (116°C) or greater pull over and stop the vehicle. Idle the vehicle with the air conditioner turned off until the pointer drops back into the normal range 200– 230°F (93–110°C). If the pointer remains at 240°F (116°C) or greater and you hear a chime, turn the engine off immediately and call for service.
346 WHAT TO DO IN EMERGENCIES This kit will provide a temporary tire seal, allowing you TIREFIT Kit Components and Operation to drive your vehicle up to 100 miles (160 km) with a maximum speed of 55 mph (88 km/hr). TIREFIT Storage The TIREFIT kit is located in the trunk. 1. Sealant Bottle 2. Deflation Button — If Equipped 3. Pressure Gauge TIREFIT Location 4.
WHAT TO DO IN EMERGENCIES 5. Mode Select Knob 6. Sealant Hose (Clear with Yellow Cap) 7. Air Pump Hose (Black) 8. Power Plug 347 Selecting Sealant Mode Turn the Mode Select Knob (5) to this position to inject the TIREFIT Sealant and to inflate the tire. Use the Sealant Hose (clear hose with the yellow cap) (6) when selecting this mode. Using the Mode Select Knob and Hoses Your TIREFIT kit may be equipped with either of the following symbols to indicate the air or sealant mode.
348 WHAT TO DO IN EMERGENCIES TIREFIT Usage Precautions • Replace the TIREFIT Sealant Bottle (1) and Sealant Hose (6) prior to the expiration date (printed on the bottle label) to assure optimum operation of the system. Refer to “Sealing a Tire with TIREFIT” section (F) “Sealant Bottle and Hose Replacement”. • The Sealant Bottle (1) and Sealant Hose (6) is a one tire application use. After each use, always immediately replace these components at an authorized dealer.
WHAT TO DO IN EMERGENCIES 349 WARNING! (Continued) WARNING! (Continued) • Do not use TIREFIT or drive the vehicle under the following circumstances: − If the cut or puncture in the tire tread is approximately 0.24 in. (6 mm) or larger. − If the tire has any sidewall damage. − If the tire has any damage from driving with extremely low tire pressure. − If the tire has any damage from driving on a flat tire. − If the wheel has any damage. − If you are unsure of the condition of the tire or the wheel.
350 WHAT TO DO IN EMERGENCIES WARNING! (Continued) • TIREFIT Sealant solution contains latex. In case of allergic reaction or rash, consult a physician immediately. Keep TIREFIT out of reach of children. If swallowed, rinse mouth immediately with plenty of water and drink plenty of water. Do not induce vomiting! Consult a physician immediately. • Use the gloves provided in the Accessory Storage Compartment (located on the bottom of the air pump) when operating the TIREFIT kit.
WHAT TO DO IN EMERGENCIES 351 3. Uncoil the Sealant Hose (6) and then remove the NOTE: Manual transmission vehicles must have the parking brake engaged and the shifter in NEUTRAL. yellow cap from the fitting at the end of the hose. 4. Place the TIREFIT kit flat on the ground next to the • After pressing the Power Button (4), the sealant (white fluid) will flow from the Sealant Bottle (1) through the deflated tire. Sealant Hose (6) and into the tire. 5.
352 WHAT TO DO IN EMERGENCIES 2. Connect the Power Plug (8) to a different 12 Volt power outlet in your vehicle or another vehicle, if available. Make sure the engine is running before turning ON the TIREFIT kit. 3. The Sealant Bottle (1) may be empty due to previous use. Call for assistance. 2. The pump will start to inject air into the tire immediately after the Sealant Bottle (1) is empty.
WHAT TO DO IN EMERGENCIES 2. Remove the Speed Limit sticker from the top of the Sealant Bottle (1) and place the sticker on the instrument panel. 3. Immediately disconnect the Sealant Hose (6) from the valve stem, reinstall the yellow cap on the fitting at the end of the hose, and place the TIREFIT kit in the vehicle storage location. Quickly proceed to (D) “Securing TIREFIT Sealant in the Tire”. CAUTION! • The metal end fitting from Power Plug (8) may get hot after use, so should be handled carefully.
354 WHAT TO DO IN EMERGENCIES 1. Turn the Mode Select Knob (5) to the Air Mode Deflation Button to reduce the tire pressure to the position. recommended inflation pressure before continuing. 2. Uncoil the Air Pump Hose (7) and connect it to the 2. Disconnect the TIREFIT kit from the valve stem and valve stem. then reinstall the cap on the valve stem. 3. Check the pressure in the tire by reading the Pressure 3. Place the TIREFIT kit in its proper storage area in the Gauge (3). vehicle.
WHAT TO DO IN EMERGENCIES (F) Sealant Bottle and Hose Replacement: 1. Uncoil the Sealant Hose (6). 355 housing. Then, press the bottle into the housing. An audible click will be heard, indicating the bottle is locked in place. 2. Locate the rectangular Sealant Bottle release button in 6. Verify the yellow cap is installed on the fitting at the the recessed area where you place your fingers to unlatch end of the Sealant Hose (6) and return the hose to its the hoses (6) (7) from their storage area.
356 WHAT TO DO IN EMERGENCIES CAUTION! NOTE: The remote battery posts are viewed by standing on the right side of the vehicle looking over the fender. Do not use a portable battery booster pack or any other booster source with a system voltage greater than 12 Volts or damage to the battery, starter motor, alternator or electrical system may occur. WARNING! Do not attempt jump-starting if the battery is frozen. It could rupture or explode and cause personal injury.
WHAT TO DO IN EMERGENCIES Remote Battery Posts WARNING! • Take care to avoid the radiator cooling fan whenever the hood is raised. It can start anytime the ignition switch is on. You can be injured by moving fan blades. • Remove any metal jewelry such as watch bands or bracelets that might make an inadvertent electrical contact. You could be seriously injured. • Batteries contain sulfuric acid that can burn your skin or eyes and generate hydrogen gas which is flammable and explosive.
358 WHAT TO DO IN EMERGENCIES CAUTION! WARNING! Failure to follow these procedures could result in damage to the charging system of the booster vehicle or the discharged vehicle. Do not connect the cable to the negative post (-) of the discharged battery. The resulting electrical spark could cause the battery to explode and could result in personal injury. 1. Connect the positive (+) end of the jumper cable to the remote positive (+) post of the discharged vehicle. 5.
WHAT TO DO IN EMERGENCIES 359 8. Disconnect the opposite end of the positive (+) jumper FREEING A STUCK VEHICLE If your vehicle becomes stuck in mud, sand, or snow, it cable from the positive (+) post of the booster battery. can often be moved by a rocking motion. Turn your 9. Disconnect the positive (+) end of the jumper cable steering wheel right and left to clear the area around the from the remote positive (+) post of the discharged front wheels. Then shift back and forth between REvehicle.
360 WHAT TO DO IN EMERGENCIES CAUTION! WARNING! • When “rocking” a stuck vehicle by moving between 1st and REVERSE, do not spin the wheels faster than 15 mph (24 km/h), or drivetrain damage may result. • Revving the engine or spinning the wheels too fast may lead to transmission overheating and failure. It can also damage the tires. Do not spin the wheels above 30 mph (48 km/h) while in gear (no transmission shifting occurring). Fast spinning tires can be dangerous.
WHAT TO DO IN EMERGENCIES Towing This Vehicle Behind Another Vehicle Flatbed towing is recommended. DO NOT tow an AWD vehicle with the rear wheels on the ground unless the rear driveshaft is removed and the transmission is in NEUTRAL. Vehicles WITHOUT AWD may be towed (with rear wheels on the ground) with the transmission in NEUTRAL under the following conditions: • The distance to be traveled must not exceed 15 miles (24 km). • The towing speed must not exceed 30 mph (48 km/h).
362 WHAT TO DO IN EMERGENCIES CAUTION! (Continued) • Do not push or tow this vehicle with another vehicle as damage to the bumper fascia and transmission may result. If you must use the accessories (wipers, defrosters, etc.) while being towed, the ignition must be placed in the RUN position, not the ACC position. Make certain the transmission remains in NEUTRAL. Towing This Vehicle Behind Another Vehicle With A Tow Dolly The manufacturer does not recommend that you tow this vehicle on a tow dolly.
MAINTAINING YOUR VEHICLE CONTENTS 䡵 Engine Compartment — 6.1L . . . . . . . . . . . . . 365 ▫ Engine Oil Filter . . . . . . . . . . . . . . . . . . . . . 372 䡵 Onboard Diagnostic System — OBD II . . . . . . 366 ▫ Engine Air Cleaner Filter . . . . . . . . . . . . . . . 372 ▫ Loose Fuel Filler Cap . . . . . . . . . . . . . . . . . 366 ▫ Maintenance-Free Battery . . . . . . . . . . . . . . 373 䡵 Emissions Inspection And Maintenance Programs . . . . . . . . . . . . . . . . . . . . . . . . . . . .
364 MAINTAINING YOUR VEHICLE ▫ Cooling System . . . . . . . . . . . . . . . . . . . . . 382 䡵 Bulb Replacement . . . . . . . . . . . . . . . . . . . . . 407 ▫ Brake System . . . . . . . . . . . . . . . . . . . . . . . 387 ▫ Low Beam Headlamp, High Beam Headlamp, And Park/Turn Lamp . . . . . . . . . 407 ▫ Automatic Transmission . . . . . . . . . . . . . . . 390 ▫ Rear Axle . . . . . . . . . . . . . . . . . . . . . . . . . . 391 ▫ Appearance Care And Protection From Corrosion . . . . . . . . . . . . . .
MAINTAINING YOUR VEHICLE 365 ENGINE COMPARTMENT — 6.
366 MAINTAINING YOUR VEHICLE ONBOARD DIAGNOSTIC SYSTEM — OBD II Your vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems. When these systems are operating properly, your vehicle will provide excellent performance and fuel economy, as well as engine emissions well within current government regulations.
MAINTAINING YOUR VEHICLE 367 TRIP ODOMETER button to turn off the message. If the serviced, recently had a dead battery or a battery replaceproblem continues, the message will appear the next time ment. If the OBD II system should be determined not ready for the I/M test, your vehicle may fail the test. the vehicle is started. A loose, improperly installed, or damaged fuel filler cap Your vehicle has a simple ignition key-actuated test, which you can use prior to going to the test station.
368 MAINTAINING YOUR VEHICLE a. The MIL will flash for about 10 seconds and then return to being fully illuminated until you turn OFF the ignition or start the engine. This means that your vehicle’s OBD II system is not ready and you should not proceed to the I/M station. vehicle operation you should have your vehicle serviced before going to the I/M station. The I/M station can fail your vehicle because the MIL is on with the engine running.
MAINTAINING YOUR VEHICLE 369 NOTE: Intentional tampering with emissions control Besides those maintenance items specified in the fixed systems may void your warranty and could result in civil maintenance schedule, there are other components which penalties being assessed against you. may require servicing or replacement in the future. WARNING! CAUTION! You can be badly injured working on or around a motor vehicle. Only do service work for which you have the knowledge and the proper equipment.
370 MAINTAINING YOUR VEHICLE CAUTION! (Continued) • Your vehicle has been built with improved fluids that protect the performance and durability of your vehicle and also allow extended maintenance intervals. Do not use chemical flushes in these components as the chemicals can damage your engine, transmission, power steering or air conditioning. Such damage is not covered by the New Vehicle Limited Warranty.
MAINTAINING YOUR VEHICLE 371 NOTE: Under no circumstances should oil change Engine Oil Viscosity (SAE Grade) intervals exceed 6,000 miles (10 000 km) or six months, SAE 5W-40 engine oil is preferred for use in all operating temperatures. whichever occurs first.
372 MAINTAINING YOUR VEHICLE Disposing of Used Engine Oil and Oil Filters Engine Air Cleaner Filter Care should be taken in disposing of used engine oil and Refer to “Maintenance Schedule” for further information. oil filters from your vehicle. Used oil and oil filters, WARNING! indiscriminately discarded, can present a problem to the environment.
MAINTAINING YOUR VEHICLE 373 used to assure most efficient service. MOPAR威 engine air cleaner filters are a high quality filter and are recommended. Maintenance-Free Battery Your vehicle is equipped with a maintenance-free battery. You will never have to add water, nor is periodic maintenance required. NOTE: The battery is stored under an access cover in the trunk. Remote battery terminals are located in the engine compartment for jump starting.
374 MAINTAINING YOUR VEHICLE WARNING! WARNING! (Continued) • Battery fluid is a corrosive acid solution and can burn or even blind you. Do not allow battery fluid to contact your eyes, skin, or clothing. Do not lean over a battery when attaching clamps. If acid splashes in eyes or on skin, flush the area immediately with large amounts of water. • Battery gas is flammable and explosive. Keep flame or sparks away from the battery.
MAINTAINING YOUR VEHICLE Air Conditioner Maintenance For best possible performance, your air conditioner should be checked and serviced by an authorized dealer at the start of each warm season. This service should include cleaning of the condenser fins and a performance test. Drive belt tension should also be checked at this time. CAUTION! Do not use chemical flushes in your air conditioning system as the chemicals can damage your air conditioning components.
376 MAINTAINING YOUR VEHICLE 1. Remove the access door in the cowl screen by pressing Refrigerant Recovery and Recycling R-134a Air Conditioning Refrigerant is a hydrofluoro- the retaining clips. carbon (HFC) that is endorsed by the Environmental Protection Agency and is an ozone-saving product. However, the manufacturer recommends that air conditioning service be performed by authorized dealers or other service facilities using recovery and recycling equipment.
MAINTAINING YOUR VEHICLE 377 2. Slide the lid on the filter adapter forward and down and remove the used filter. A/C Air Filter Refer to “Maintenance Schedule” for the proper mainte3. Install the new filter with arrows pointing in the nance intervals. direction of airflow, which is toward the rear of the Body Lubrication vehicle (text and arrows on the filter will indicate this).
378 MAINTAINING YOUR VEHICLE tailgate, sliding doors and hood hinges, should be lubricated periodically with a lithium based grease, such as MOPAR威 Spray White Lube or equivalent to assure quiet, easy operation and to protect against rust and wear. Prior to the application of any lubricant, the parts concerned should be wiped clean to remove dust and grit; after lubricating excess oil and grease should be removed.
MAINTAINING YOUR VEHICLE 379 present please proceed to clean wiper blades with humid The fluid reservoir will hold nearly 1 gal (4 l) of washer cloth removing any debris that may be affecting its fluid when the message “Low Washer Fluid” appears in the Electronic Vehicle Information Center (EVIC). function. Adding Washer Fluid The windshield washer fluid reservoir is located in the front of the engine compartment. Be sure to check the fluid level in the reservoir at regular intervals.
380 MAINTAINING YOUR VEHICLE have an authorized technician inspect the complete exhaust system and adjacent body areas for broken, damaged, deteriorated, or mispositioned parts. Open seams or loose connections could permit exhaust fumes to seep into the passenger compartment. In addition, inspect the exhaust system each time the vehicle is raised for lubrication or oil change. Replace as required. WARNING! (Continued) • A hot exhaust system can start a fire if you park over materials that can burn.
MAINTAINING YOUR VEHICLE CAUTION! (Continued) • Damage to the catalytic converter can result if your vehicle is not kept in proper operating condition. In the event of engine malfunction, particularly involving engine misfire or other apparent loss of performance, have your vehicle serviced promptly. Continued operation of your vehicle with a severe malfunction could cause the converter to overheat, resulting in possible damage to the converter and vehicle.
382 MAINTAINING YOUR VEHICLE • Do not idle the engine with any spark plug wires disconnected or removed, such as when diagnostic testing, or for prolonged periods during very rough idle or malfunctioning operating conditions. Cooling System WARNING! • When working near the radiator cooling fan, disconnect the fan motor lead or turn the ignition switch to the LOCK position. The fan is temperature controlled and can start at any time the ignition switch is in the ON position.
MAINTAINING YOUR VEHICLE If the cap is sealing properly, the engine coolant (antifreeze) will begin to drain from the coolant recovery bottle. DO NOT REMOVE THE COOLANT PRESSURE CAP WHEN THE COOLING SYSTEM IS HOT. Cooling System – Drain, Flush, and Refill If the engine coolant (antifreeze) is dirty or contains a considerable amount of sediment, clean and flush with a reliable cooling system cleaner. Follow with a thorough rinsing to remove all deposits and chemicals.
384 MAINTAINING YOUR VEHICLE CAUTION! (Continued) • This vehicle has not been designed for use with propylene glycol-based engine coolant (antifreeze). Use of propylene glycol-based engine coolant (antifreeze) is not recommended. • The manufacturer recommends using MOPAR威 Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) or equivalent. • Mix a minimum solution of 50% HOAT engine coolant and distilled water.
MAINTAINING YOUR VEHICLE NOTE: Mixing engine coolant (antifreeze) types will decrease the life of the engine coolant (antifreeze) and will require more frequent coolant changes. Cooling System Pressure Cap The cap must be fully tightened to prevent loss of engine coolant (antifreeze), and to ensure that engine coolant (antifreeze) will return to the radiator from the coolant recovery bottle. The cap should be inspected and cleaned if there is any accumulation of foreign material on the sealing surfaces.
386 MAINTAINING YOUR VEHICLE Disposal of Used Coolant Used ethylene glycol-based engine coolant (antifreeze) is a regulated substance requiring proper disposal. Check with your local authorities to determine the disposal rules for your community. To prevent ingestion by animals or children, do not store ethylene glycol-based engine coolant (antifreeze) in open containers or allow it to remain in puddles on the ground. If ingested by a child or pet, seek emergency assistance immediately.
MAINTAINING YOUR VEHICLE 387 If an examination of your engine compartment shows no • Make sure that the radiator and coolant recovery evidence of radiator or hose leaks, the vehicle may be bottle overflow hoses are not kinked or obstructed. safely driven. The vapor will soon dissipate. • Keep the front of the radiator clean. If your vehicle is equipped with air conditioning, keep the front of the • Do not overfill the coolant recovery bottle. condenser clean.
388 MAINTAINING YOUR VEHICLE WARNING! Riding the brakes can lead to brake failure and possibly an accident. Driving with your foot resting or riding on the brake pedal can result in abnormally high brake temperatures, excessive lining wear, and possible brake damage. You would not have your full braking capacity in an emergency. Clean the top of the master cylinder area before removing the cap. Add fluid to bring the level up to the “MAX” mark on the side of the master cylinder reservoir.
MAINTAINING YOUR VEHICLE 389 WARNING! WARNING! (Continued) • Use only manufacturer’s recommended brake fluid. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Your Vehicle” for further information. Using the wrong type of brake fluid can severely damage your brake system and/or impair its performance. The proper type of brake fluid for your vehicle is also labeled on the original factory installed hydraulic master cylinder reservoir.
390 MAINTAINING YOUR VEHICLE WARNING! (Continued) CAUTION! • Do not allow petroleum based fluid to contaminate the brake fluid. Brake seal components could be damaged, causing partial or complete brake failure. This could result in an accident. • Using a transmission fluid other than the manufacturer’s recommended fluid may cause deterioration in transmission shift quality and/or torque converter shudder.
MAINTAINING YOUR VEHICLE 391 Fluid and Filter Changes Special Additives Refer to “Maintenance Schedule” for further information. Automatic Transmission Fluid (ATF) is an engineered product and its performance may be impaired by suppleIf the transmission is disassembled for any reason, the mental additives. Therefore, do not add any fluid addifluid and filter should be changed. tives to the transmission.
392 MAINTAINING YOUR VEHICLE on trees and road surfaces during other seasons, are highly corrosive to the metal in your vehicle. Outside parking, which exposes your vehicle to airborne contaminants, road surfaces on which the vehicle is operated, extreme hot or cold weather and other extreme condiFluid Level Check tions will have an adverse effect on paint, metal trim, and Check the fluid level by removing the fill plug on the underbody protection. axle.
MAINTAINING YOUR VEHICLE • Insects, tree sap, and tar. • Salt in the air near seacoast localities. • Atmospheric fallout/industrial pollutants. • Avoid using abrasive compounds and power buffing that may diminish the gloss or thin out the paint finish. CAUTION! Washing • Wash your vehicle regularly. Always wash your vehicle in the shade using MOPAR威 Car Wash or a mild car wash soap, and rinse the panels completely with clear water.
394 MAINTAINING YOUR VEHICLE • It is important that the drain holes in the lower edges • Use MOPAR威 Touch Up Paint or equivalent on of the doors, rocker panels, and trunk be kept clear scratches as soon as possible. Your authorized dealer and open. has touch up paint to match the color of your vehicle. • If you detect any stone chips or scratches in the paint, Wheel and Wheel Trim Care touch them up immediately.
MAINTAINING YOUR VEHICLE 395 Stain Repel Fabric Cleaning Procedure – If Interior Care Use MOPAR威 Fabric Cleaner or equivalent to clean fabric Equipped Stain Repel seats may be cleaned in the following man- upholstery and MOPAR威 Carpet Cleaner or equivalent ner: for carpeting. • Remove as much of the stain as possible by blotting Interior trim should be cleaned starting with a damp with a clean, dry towel. cloth, or MOPAR威 Satin Select or equivalent. Do not use harsh cleaners or Armor All威.
396 MAINTAINING YOUR VEHICLE solvents, detergents, or ammonia-based cleaners to clean Do not use abrasive cleaning components, solvents, steel your leather upholstery. Application of a leather condi- wool or other aggressive material to clean the lenses. tioner is not required to maintain the original condition. Glass Surfaces All glass surfaces should be cleaned on a regular basis WARNING! with MOPAR威 Glass Cleaner or any commercial Do not use volatile solvents for cleaning purposes.
MAINTAINING YOUR VEHICLE 397 1. Clean with a wet soft rag or micro-fiber towel. A mild Replace the belts if they appear frayed or worn or if the soap solution may be used, but do not use high alcohol buckles do not work properly. content or abrasive cleaners. If soap is used, wipe clean Cleaning the Center Console Cupholders with a clean damp rag. Clean with a damp cloth or towel using a mild detergent with the cupholder in the center console. 2. Dry with a soft tissue.
398 MAINTAINING YOUR VEHICLE FUSES CAUTION! Integrated Power Module The Integrated Power Module (IPM) is located in the engine compartment. This module contains fuses and relays. Integrated Power Module • When installing the integrated power module cover, it is important to ensure the cover is properly positioned and fully latched. Failure to do so may allow water to get into the integrated power module and possibly result in an electrical system failure.
MAINTAINING YOUR VEHICLE Cavity 1 Cartridge Fuse — 2 — 3 — 4 — 5 6 — — 7 8 — — 9 — MiniFuse Description Cavity 15 Amp Blue 25 Amp Natural 25 Amp Natural 25 Amp Natural — 25 Amp Natural — 30 Amp Green — Washer Motor 10 Powertrain Control Module (PCM) Ignition Run/Start 11 Alternator 13 — Ignition Coils/Injectors 14 15 — Starter 16 17 18 19 — 12 Cartridge Fuse 30 Amp Pink 30 Amp Pink 40 Amp Green 50 Amp Red — 50 Amp Red — — — — 399 MiniFuse Description — Windshield Wiper
400 MAINTAINING YOUR VEHICLE Cavity 20 21 22 Cartridge Fuse — — — MiniFuse Description — — — — — — Rear Power Distribution Center There is also a power distribution center located in the trunk under the spare tire access panel. This center contains fuses and relays.
MAINTAINING YOUR VEHICLE 401 CAUTION! Rear Power Distribution Center • When installing the power distribution center cover, it is important to ensure the cover is properly positioned and fully latched. Failure to do so may allow water to get into the power distribution center and possibly result in an electrical system failure. • When replacing a blown fuse, it is important to use only a fuse having the correct amperage rating.
402 MAINTAINING YOUR VEHICLE Cavity 1 2 3 4 CarMinitridge Fuse Fuse 60 Amp — Yellow 40 Amp — Green — — 40 Amp — Green Description Cavity 6 Cartridge Fuse 30 Amp Pink — Ignition Off Draw (IOD) Cavity 1 of the Rear Power Distribution Center contains a black IOD fuse needed for vehicle processing during assembly. The service replacement part is a 60 Amp yellow cartridge fuse.
MAINTAINING YOUR VEHICLE Cavity 12 * 13 * 14 Cartridge Fuse — — — 15 16 17 — — — 18 — 19 — 20 21 — — MiniFuse — — 10 Amp Red Description — — AC Heater Control/ Cluster/Security Module – If Equipped — — — — 20 Amp Cluster Yellow 20 Amp Selectable Power Outlet Yellow 10 Amp Stop Lights Red — — — — Cavity 22 23 24 25 26 27 Cartridge Fuse — — — — — — 28 — 29 — 403 MiniFuse Description — — — — — 10 Amp Red 10 Amp Red 5 Amp Orange — — — — — Occupant Restraint Controller (ORC) Ignition Ru
404 MAINTAINING YOUR VEHICLE Cavity 30 Cartridge Fuse — 31 32 33 34 35 — — — — — 36 — 37 — MiniFuse Description 10 Amp Door Modules/Power Red Mirrors/Steering Control Module (SCM) — — — — — — — — 5 Amp Antenna Module – If Orange Equipped/Power Mirrors 25 Amp Hands-Free Phone – If Natural Equipped/Video Monitor – If Equipped/Radio 15 Amp Transmission Blue Cavity 38 39 40 41 42 43 Cartridge Fuse — MiniFuse Description 10 Amp Cargo Light/Satellite Red Receiver (SDARS) Video – If Equipped/V
MAINTAINING YOUR VEHICLE Cavity 44 CarMinitridge Fuse Fuse 20 Amp — Blue Description Amplifier – If Equipped/Sunroof – If Equipped * Cavities 11, 12, and 13 contain self-resetting fuses (circuit breakers) that are only serviceable by an authorized dealer. The cluster and the driver seat switch are fused by the 25 Amp circuit breaker in cavity 11. The passenger seat switch is fused by the 25 Amp circuit breaker in cavity 12.
406 MAINTAINING YOUR VEHICLE REPLACEMENT BULBS LIGHT BULBS – Interior Bulb Number Rear Courtesy/Reading Lamps . . . . . . . . . . . . . W5W Rear Compartment (Trunk) Lamp . . . . . . . . . . . . . 562 Overhead Console Reading Lamps . . . . . . . . . . . . 578 Visor Vanity Lamps . . . . . . . . . . . . . . . . . . . . . A6220 Glove Box Lamp – If Equipped. . . . . . . . . . . . . . . 194 Door Courtesy . . . . . . . . . . . . . . . . . . . . . . . . . . 562 Shift Indicator Lamp . . . . . . . . . . . . . . . .
MAINTAINING YOUR VEHICLE BULB REPLACEMENT Low Beam Headlamp, High Beam Headlamp, and Park/Turn Lamp 407 2. Remove the two fasteners from the back of the tail lamp assembly. High Intensity Discharge Headlamps (HID) The headlamps are a type of high voltage discharge tube. High voltage can remain in the circuit even with the headlight switch off and the key removed. Because of this, you should not attempt to service a headlamp bulb yourself.
408 MAINTAINING YOUR VEHICLE 6. Disconnect the electrical connector. 7. Pull the tail lamp assembly clear from the vehicle to access the bulbs. Turn bulb sockets counterclockwise to remove. 8. Turn the appropriate bulb and socket assembly counterclockwise to remove it from the tail lamp assembly.
MAINTAINING YOUR VEHICLE 2 — Tail Lamp Bulb 3 — Turn Signal Lamp Bulb 409 7
410 MAINTAINING YOUR VEHICLE 9. Disconnect the bulb from the socket assembly and install the replacement bulb. 10. Reinstall the bulb and socket assembly into the tail lamp assembly, and then turn it clockwise. 11. Reinstall the tail lamp assembly, fasteners, electrical connector, and trunk liner. 12. Close the trunk. License Lamp 4 — Backup Lamp Bulb 1. Remove the screws securing the lamp to the rear fascia.
MAINTAINING YOUR VEHICLE 2. Remove the bulb and socket assembly. 411 4. Reinstall the bulb and socket assembly. 3. Disconnect the bulb from the socket assembly and 5. Reattach the lamp to the rear fascia, and then install install the replacement bulb. the screws.
412 MAINTAINING YOUR VEHICLE FLUID CAPACITIES Fuel (Approximate) Engine Oil with Filter 6.1 Liter Engine (SAE 5W-40, API Certified) Cooling System * 6.1 Liter Engine (MOPAR威 Antifreeze/Coolant 5 Year/100,000 Mile Formula or equivalent) * Includes heater and coolant recovery bottle filled to MAX level. U.S. 19 Gallons Metric 72 Liters 7 Quarts 6.6 Liters 15.2 Quarts 14.
MAINTAINING YOUR VEHICLE 413 FLUIDS, LUBRICANTS, AND GENUINE PARTS Engine Component Engine Coolant Engine Oil Engine Oil Filter Spark Plugs Fuel Selection Fluid, Lubricant, or Genuine Part MOPAR威 Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) or equivalent.
414 MAINTAINING YOUR VEHICLE Chassis Component Automatic Transmission Brake Master Cylinder Power Steering Reservoir Rear Axle Fluid, Lubricant, or Genuine Part MOPAR威 ATF+4威 Automatic Transmission Fluid or equivalent licensed ATF+4威 product. MOPAR威 DOT 3 and SAE J1703 should be used or equivalent. If DOT 3 brake fluid is not available, then DOT 4 is acceptable. Use only recommended brake fluids.
M A I N T E N A N C ▫ Required Maintenance Intervals . . . . . . . . . . 418 E MAINTENANCE SCHEDULES CONTENTS 䡵 Emissions Control System Maintenance . . . . . . 416 䡵 Maintenance Schedule . . . . . . . . . . . . . . . . . .
M A I N T E N A N C E 416 MAINTENANCE SCHEDULES EMISSIONS CONTROL SYSTEM MAINTENANCE The Scheduled Maintenance services listed in bold type must be done at the times or mileages specified to ensure the continued proper functioning of the emissions control system. These and all other maintenance services included in this manual, should be done to provide best vehicle performance and reliability.
MAINTENANCE SCHEDULES NOTE: • The oil change indicator message will not monitor the time since the last oil change. Change your vehicle’s oil if it has been six months since your last oil change, even if the oil change indicator message is NOT illuminated. • Change your engine oil more often if you drive your vehicle off-road for an extended period of time. 417 M A I N T E N A At Each Stop for Fuel N C • Check the engine oil level.
M A I N T E N A N C E 418 MAINTENANCE SCHEDULES • Check the fluid levels of the coolant reservoir, brake master cylinder, and power steering, add as needed. CAUTION! • Check all lights and other electrical items for correct operation. Failure to perform the required maintenance items may result in damage to the vehicle. At Each Oil Change • Change the engine oil filter. S • Inspect the brake hoses and lines.
MAINTENANCE SCHEDULES 6,000 Miles (10,000 km) or 6 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. Odometer Reading Repair Order # Signature Authorized Chrysler Dealer Date Dealer Code 419 M 12,000 Miles (20,000 km) or 12 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. ❏ If you are using your vehicle in dusty or off-road conditions, inspect the engine air cleaner filter, and replace if necessary.
M 420 MAINTENANCE SCHEDULES A I 18,000 Miles (30,000 km) or N T 18 Months Maintenance E Service Schedule N ❏ Change the engine oil and engine oil A filter. N ❏ Rotate tires. C ❏ Inspect the rear axle fluid. E 24,000 Miles (40,000 km) or 24 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. ❏ If you are using your vehicle in dusty or off-road conditions, inspect the engine air cleaner filter, and replace if necessary. ❏ Replace the air conditioning filter.
MAINTENANCE SCHEDULES 30,000 Miles (50,000 km) or 30 Months Maintenance Service Schedule 36,000 Miles (60,000 km) or 36 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. ❏ If you are using your vehicle in dusty or off-road conditions, inspect the engine air cleaner filter, and replace if necessary. ❏ Replace the air conditioning filter. ❏ Inspect the brake linings, and replace if necessary. ❏ Inspect the CV joints. ❏ Inspect the exhaust system.
M 422 MAINTENANCE SCHEDULES A I 42,000 Miles (70,000 km) or N T 42 Months Maintenance E Service Schedule N ❏ Change the engine oil and engine oil A filter. N ❏ Rotate tires. C E 48,000 Miles (80,000 km) or 48 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. ❏ If you are using your vehicle in dusty or off-road conditions, inspect the engine air cleaner filter, and replace if necessary. ❏ Replace the air conditioning filter.
MAINTENANCE SCHEDULES 54,000 Miles (90,000 km) or 54 Months Maintenance Service Schedule 60,000 Miles (100,000 km) or 60 Months Maintenance Service Schedule ❏ ❏ ❏ ❏ ❏ ❏ ❏ ❏ ❏ Change the engine oil and engine oil filter. Rotate tires. Replace the engine air cleaner filter. Replace the air conditioning filter. Inspect the brake linings, and replace if necessary. Adjust parking brake on vehicles equipped with four-wheel disc brakes. Inspect the CV joints. Inspect the exhaust system.
M 424 MAINTENANCE SCHEDULES A I 66,000 Miles (110,000 km) or N T 66 Months Maintenance E Service Schedule N ❏ Change the engine oil and engine oil A filter. N ❏ Rotate tires. C E 72,000 Miles (120,000 km) or 72 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. ❏ If you are using your vehicle in dusty or off-road conditions, inspect the engine air cleaner filter, and replace if necessary. ❏ Replace the air conditioning filter.
MAINTENANCE SCHEDULES 78,000 Miles (130,000 km) or 78 Months Maintenance Service Schedule 84,000 Miles (140,000 km) or 84 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. ❏ If you are using your vehicle in dusty or off-road conditions, inspect the engine air cleaner filter, and replace if necessary. ❏ Replace the air conditioning filter. ❏ Inspect the brake linings, and replace if necessary. ❏ Inspect the CV joints. ❏ Inspect the exhaust system.
M 426 MAINTENANCE SCHEDULES A I 90,000 Miles (150,000 km) or N T 90 Months Maintenance E Service Schedule N ❏ Change the engine oil and engine oil A filter. N ❏ Rotate tires. C ❏ Replace the engine air cleaner filter. E S C H E D U L E S 8 96,000 Miles (160,000 km) or 96 Months Maintenance Service Schedule ❏ Inspect and replace the PCV Valve if necessary.* ❏ Inspect the rear axle fluid. ❏ Adjust parking brake on vehicles equipped with four-wheel disc brakes.
MAINTENANCE SCHEDULES 102,000 Miles (170,000 km) or 102 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. ❏ Replace the spark plugs. ❏ Flush and replace the engine coolant if not done at 60 months. Odometer Reading Repair Order # Signature Authorized Chrysler Dealer Date Dealer Code 427 M 108,000 Miles (180,000 km) or 108 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires.
M 428 MAINTENANCE SCHEDULES A I 114,000 Miles (190,000 km) or N T 114 Months Maintenance E Service Schedule N ❏ Change the engine oil and engine oil A filter. N ❏ Rotate tires. C E S C H E D U L E S 8 Odometer Reading Repair Order # Signature Authorized Chrysler Dealer Date Dealer Code 120,000 Miles (200,000 km) or 120 Months Maintenance Service Schedule ❏ ❏ ❏ ❏ ❏ ❏ ❏ ❏ ❏ Change the engine oil and engine oil filter. Rotate tires. Replace the engine air cleaner filter.
MAINTENANCE SCHEDULES 126,000 Miles (210,000 km) or 126 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. ❏ Inspect the rear axle fluid. Odometer Reading Repair Order # Signature Authorized Chrysler Dealer Date Dealer Code 429 M 132,000 Miles (220,000 km) or 132 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires.
M 430 MAINTENANCE SCHEDULES A I 138,000 Miles (230,000 km) or N T 138 Months Maintenance E Service Schedule N ❏ Change the engine oil and engine oil A filter. N ❏ Rotate tires. C E S C H E D U L E S 8 Odometer Reading Repair Order # Signature Authorized Chrysler Dealer Date Dealer Code 144,000 Miles (240,000 km) or 144 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires.
MAINTENANCE SCHEDULES 431 M A 150,000 Miles (250,000 km) or 150 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. ❏ Replace the engine air cleaner filter. ❏ Adjust parking brake on vehicles equipped with four-wheel disc brakes. Odometer Reading Repair Order # Signature Authorized Chrysler Dealer * This maintenance is recommended by the manufacturer I to the owner, but is not required to maintain emissions N T warranty.
IF YOU NEED CONSUMER ASSISTANCE CONTENTS 䡵 Suggestions For Obtaining Service For Your Vehicle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 435 ▫ Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) . . . . . . . . . . . . 437 ▫ Prepare For The Appointment . . . . . . . . . . . 435 ▫ Service Contract . . . . . . . . . . . . . . . . . . . . . 437 ▫ Prepare A List . . . . . . . . . . . . . . . . . . . . . . 435 䡵 Warranty Information . . . . . . . . . . . . . . . . . .
434 IF YOU NEED CONSUMER ASSISTANCE 䡵 Publication Order Forms . . . . . . . . . . . . . . . . 439 ▫ Traction Grades . . . . . . . . . . . . . . . . . . . . . 441 䡵 Department Of Transportation Uniform Tire Quality Grades . . . . . . . . . . . . . . . . . . . . . . . . 441 ▫ Temperature Grades . . . . . . . . . . . . . . . . . . 442 ▫ Treadwear . . . . . . . . . . . . . . . . . . . . . . . . .
IF YOU NEED CONSUMER ASSISTANCE 435 the service advisor and list the items in order of priority. At many authorized dealers, you may obtain a rental vehicle at a minimal daily charge. If you need a rental, it Prepare For The Appointment is advisable to make these arrangements when you call If you’re having warranty work done, be sure to have the for an appointment. right papers with you. Take your warranty folder. All work to be performed may not be covered by the IF YOU NEED ASSISTANCE warranty.
436 IF YOU NEED CONSUMER ASSISTANCE This is why you should always talk to an authorized • Vehicle delivery date and mileage dealer’s service manager first. Most matters can be reChrysler Group LLC Customer Center solved with this process. P.O. Box 21–8004 • If for some reason you are still not satisfied, talk to the Auburn Hills, MI 48321–8004 general manager or owner of the authorized dealer- Phone: (800) 247–9753 ship. They want to know if you need assistance. Chrysler Canada Inc.
IF YOU NEED CONSUMER ASSISTANCE Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) To assist customers who have hearing difficulties, the manufacturer has installed special TDD (Telecommunication Devices for the Deaf) equipment at its customer center. Any hearing or speech impaired customer, who has access to a TDD or a conventional teletypewriter (TTY) in the United States, can communicate with the manufacturer by dialing 1–800–380–CHRY.
438 IF YOU NEED CONSUMER ASSISTANCE We appreciate that you have made a major investment when you purchased the vehicle. An authorized dealer has also made a major investment in facilities, tools, and training to assure that you are absolutely delighted with the ownership experience. You’ll be pleased with their sincere efforts to resolve any warranty issues or related concerns.
IF YOU NEED CONSUMER ASSISTANCE If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign. However, NHTSA cannot become involved in individual problems between you, your authorized dealer, and the manufacturer. 439 Transport Canada, Motor Vehicle Defect Investigations and Recalls, 2780 Sheffield Road, Ottawa, Ontario K1B 3V9.
440 IF YOU NEED CONSUMER ASSISTANCE vehicle, system, and/or components is written in • Owner’s Manuals straightforward language with illustrations, diagrams, These Owner’s Manuals have been prepared with the and charts. assistance of service and engineering specialists to • Diagnostic Procedure Manuals acquaint you with specific Chrysler Group LLC vehicles.
IF YOU NEED CONSUMER ASSISTANCE DEPARTMENT OF TRANSPORTATION UNIFORM TIRE QUALITY GRADES The following tire grading categories were established by the National Highway Traffic Safety Administration. The specific grade rating assigned by the tire’s manufacturer in each category is shown on the sidewall of the tires on your vehicle. 441 significantly from the norm due to variations in driving habits, service practices, and differences in road characteristics and climate.
442 IF YOU NEED CONSUMER ASSISTANCE Temperature Grades The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat and its ability to dissipate heat, when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and excessive temperature can lead to sudden tire failure.
INDEX 10
444 INDEX About Your Brakes . . . . . . . . . . . . . . . . . . . . 295,297 ABS (Anti-Lock Brake System) . . . . . . . . . . . . 298,301 Adding Engine Coolant (Antifreeze) . . . . . . . . . . 384 Adding Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . 337 Adding Washer Fluid . . . . . . . . . . . . . . . . . . . . . 379 Additives, Fuel . . . . . . . . . . . . . . . . . . . . . . . . . 335 Adjustable Pedals . . . . . . . . . . . . . . . . . . . . . . .
INDEX Automatic Door Locks . . . . . . . . . . . . . . . . . . . 29,30 Automatic Headlights . . . . . . . . . . . . . . . . . . . . 142 Automatic Temperature Control (ATC) . . . . . . . . . 263 Automatic Transaxle Special Additives . . . . . . . . . . . . . . . . . . . . . . 391 Automatic Transmission . . . . . . . . . . . . . 285,390,391 Adding Fluid . . . . . . . . . . . . . . . . . . . . . . 391,414 Autostick . . . . . . . . . . . . . . . . . . . . . . . . . . . . 289 Fluid and Filter Changes . . . . .
446 INDEX Brightness, Interior Lights . . . . . . . . . . . . . . . . . . 147 Checking Your Vehicle For Safety . . . . . . . . . . . . . 79 Bulb Replacement . . . . . . . . . . . . . . . . . . . . . 406,407 Checks, Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 Bulbs, Light . . . . . . . . . . . . . . . . . . . . . . . . . . 83,406 Child Restraint . . . . . . . . . . . . . . . . . . 69,70,71,74,76 Child Restraint Tether Anchors . . . . . . . . . . . . . 73,74 Calibration, Compass . . . .
INDEX Connector UCI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 247 Universal Consumer Interface (UCI) . . . . . . . . . 247 Console, Floor . . . . . . . . . . . . . . . . . . . . . . . . . . 178 Console, Overhead . . . . . . . . . . . . . . . . . . . . . . . 163 Contract, Service . . . . . . . . . . . . . . . . . . . . . . . . 437 Coolant Pressure Cap (Radiator Cap) . . . . . . . . . . 385 Cooling System . . . . . . . . . . . . . . . . . . . . . . . . .
448 INDEX Disabled Vehicle Towing . . . . . . . . . . . . . . . . . . . 360 Disposal Antifreeze (Engine Coolant) . . . . . . . . . . . . . . . 386 Engine Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . 372 Door Locks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Door Locks, Automatic . . . . . . . . . . . . . . . . . . . . 29 Door Opener, Garage . . . . . . . . . . . . . . . . . . . . . 164 Driving On Slippery Surfaces . . . . . . . . . . . . . . . . . . .
INDEX Exhaust Gas Caution . . . . . . . . . . . . . . . . . . 80,337 Fails to Start . . . . . . . . . . . . . . . . . . . . . . . . . . 278 Flooded, Starting . . . . . . . . . . . . . . . . . . . . . . 278 Fuel Requirements . . . . . . . . . . . . . . . . . . . . . 333 Jump Starting . . . . . . . . . . . . . . . . . . . . . . . . . 355 Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . 370,412,413 Oil Change Interval . . . . . . . . . . . . . . . . . . . . 370 Oil Filler Cap . . . . . . . . . . . .
450 INDEX Fluid Capacities . . . . . . . . . . . . . . . . . . . . . . . . . 412 Fluid Leaks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 Fluid Level Checks Automatic Transmission . . . . . . . . . . . . . . . . . 390 Brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 388 Cooling System . . . . . . . . . . . . . . . . . . . . . . . 382 Engine Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . 370 Power Steering . . . . . . . . . . . . . . . . . . . . . . . .
INDEX 451 Automatic . . . . . . . . . . . . . . . . . . . . . . . . . . . 142 Bulb Replacement . . . . . . . . . . . . . . . . . . . . . . 407 Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . 396 Delay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144 High Beam . . . . . . . . . . . . . . . . . . . . . . . . . . 146 High Beam/Low Beam Select Switch . . . . . . . . 146 Lights On Reminder . . . . . . . . . . . . . . . . . . . . 144 On With Wipers . . . . . . . . . . . . . . . .
452 INDEX Hood Release . . . . . . . . . . . . . . . . . . . . . . . . . . 140 Key, Programming . . . . . . . . . . . . . . . . . . . . . . . . 17 Key, Replacement . . . . . . . . . . . . . . . . . . . . . . . . 16 Ignition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Key, Sentry (Immobilizer) . . . . . . . . . . . . . . . . . . . 15 Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12,14 Key-In Reminder . . . . . . . . . . . . . . . . . . . . . . . . .
INDEX Leaks, Fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 Life of Tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . 322 Light Bulbs . . . . . . . . . . . . . . . . . . . . . . . . . . 83,406 Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83,141 Airbag . . . . . . . . . . . . . . . . . . . . . . . . 61,66,81,191 Anti-Lock . . . . . . . . . . . . . . . . . . . . . . . . . 190,300 Automatic Headlights . . . . . . . . . . . . . . . . . . .
454 INDEX Reading . . . . . . . . . . . . . . . . . . . . . . . . . . 146,164 Seat Belt Reminder . . . . . . . . . . . . . . . . . . . . . 195 Service . . . . . . . . . . . . . . . . . . . . . . . . . . . 406,407 Service Engine Soon (Malfunction Indicator) . . . 198 SmartBeams . . . . . . . . . . . . . . . . . . . . . . . . . . 143 Tire Pressure Monitoring (TPMS) . . . . . . . . 196,326 Traction Control . . . . . . . . . . . . . . . . . . . . . . . 306 Turn Signal . . . . . . . . . . . . . . . . . . . . .
INDEX 455 Occupant Restraints . . . . . . . . . . . . . . . . . . . 42,60,64 Occupant Restraints (Sedan) . . . . . . . . . . . . . 56,60,62 Octane Rating, Gasoline (Fuel) . . . . . . . . . . . . 333,413 Odometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194 Trip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194 Oil Change Indicator . . . . . . . . . . . . . . . . . . . . . 206 Oil Change Indicator, Reset . . . . . . . . . . . . . . . . . 206 Oil, Engine . . . . . . . . .
456 INDEX Oil Filter, Change . . . . . . . . . . . . . . . . . . . . . . . . 372 Oil Filter, Selection . . . . . . . . . . . . . . . . . . . . . . . 372 Onboard Diagnostic System . . . . . . . . . . . . . . 366,367 Opener, Garage Door (HomeLink威) . . . . . . . . . . . 164 Operating Precautions . . . . . . . . . . . . . . . . . . . . 366 Operator Manual (Owner’s Manual) . . . . . . . . . . . . 4 Outside Rearview Mirrors . . . . . . . . . . . . . . . . . . 91 Overhead Console . . . . . . . . . . . . . . . .
INDEX Pretensioners Seat Belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Programmable Electronic Features . . . . . . . . . . . . 216 Programming Transmitters (Remote Keyless Entry) . . . . . . . . . . . . . . . . . . . . 20 Radial Ply Tires . . . . . . . . . . . . . . . Radiator Cap (Coolant Pressure Cap) Radio Operation . . . . . . . . . . . . . . Radio Remote Controls . . . . . . . . . . Radio, Satellite (Uconnect威 studios) . Rain Sensitive Wiper System . . . . . . Rear Cupholder . . .
458 INDEX Rocking Vehicle When Stuck . . . . . . . . . . . . . . . . 359 Rotation, Tires . . . . . . . . . . . . . . . . . . . . . . . . . . 324 Safety Checks Inside Vehicle . . . . . . . . . . . . . . . . . 81 Safety Checks Outside Vehicle . . . . . . . . . . . . . . . 83 Safety Defects, Reporting . . . . . . . . . . . . . . . . . . 438 Safety, Exhaust Gas . . . . . . . . . . . . . . . . . . . . . . . 80 Safety Information, Tire . . . . . . . . . . . . . . . . . . . 307 Safety Tips . . . . . . . . . . .
INDEX Tilting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128 Security Alarm (Theft Alarm) . . . . . . . . . . . . . 17,195 Selection of Coolant (Antifreeze) . . . . . . . . . . 383,413 Selection of Oil . . . . . . . . . . . . . . . . . . . . . . . . . 371 Sentry Key (Immobilizer) . . . . . . . . . . . . . . . . . . . 15 Sentry Key Programming . . . . . . . . . . . . . . . . . . . 17 Sentry Key Replacement . . . . . . . . . . . . . . . . . . . 16 Service Assistance . . . . . . . . . . . . .
460 INDEX Telescoping Steering Column . . . . . . . . . . . . . . . 152 Temperature Control, Automatic (ATC) . . . . . . . . 263 Temperature Gauge, Engine Coolant . . . . . 193,194,345 Tether Anchor, Child Restraint . . . . . . . . . . . . . . . 73 Theft Alarm (Security Alarm) . . . . . . . . . . . . . . . . 17 Theft System (Security Alarm) . . . . . . . . . . . . . . . 17 Tilt Steering Column . . . . . . . . . . . . . . . . . . . . . 152 Time Delay, Headlight . . . . . . . . . . . . . . . . . . . .
INDEX Life of Tires . . . . . . . . . . . . . . . . . . . . . . . . . . 322 Load Capacity . . . . . . . . . . . . . . . . . . . . . 313,314 Pressure Monitor System (TPMS) . . . . . . . . . . . 326 Pressure Warning Light . . . . . . . . . . . . . . . . . . 196 Quality Grading . . . . . . . . . . . . . . . . . . . . . . . 441 Radial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 320 Replacement . . . . . . . . . . . . . . . . . . . . . . . . . 322 Rotation . . . . . . . . . . . . . . . . . . . .
462 INDEX Trunk Release Remote Control . . . . . . . . . . . . . . . 40 Video Entertainment System™ Turn Signals . . . . . . . . . . . . . . . . . . . . . . . . . 145,189 (Rear Seat Video System) . . . . . . . . . . . . . . . . . . 258 Viscosity, Engine Oil . . . . . . . . . . . . . . . . . . . . . . 371 UCI Connector . . . . . . . . . . . . . . . . . . . . . . . . . 247 Voice Recognition System (VR) . . . . . . . . . . . . . . 122 Uconnect™ (Hands-Free Phone) . . . . . . . . . . . . . .
Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Windshield Defroster . . . . . . . . . . . . . . . . . . . 81,267 Windshield Washers . . . . . . . . . . . . . . . . 148,149,379 Fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 379 Windshield Wiper Blades . . . . . . . . . . . . . . . . . . 378 Windshield Wipers . . . . . Wiper Blade Replacement Wiper, Delay . . . . . . . . .
Chrysler Group LLC 10C481-126-AC 3rd Edition Printed in U.S.A.
