2014 300 2014 OWNER’S MANUAL Chrysler Group LLC 14C481-126-AD Fourth Edition Printed in U.S.A.
VEHICLES SOLD IN CANADA With respect to any Vehicles Sold in Canada, the name Chrysler Group LLC shall be deemed to be deleted and the name Chrysler Canada Inc. used in substitution therefore. Drunken driving is one of the most frequent causes of accidents. This manual illustrates and describes the operation of features and equipment that are either standard or optional on this vehicle.
SECTION TABLE OF CONTENTS PAGE 1 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1 2 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 2 3 UNDERSTANDING THE FEATURES OF YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 3 4 UNDERSTANDING YOUR INSTRUMENT PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INTRODUCTION CONTENTS 䡵 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . .4 䡵 VEHICLE IDENTIFICATION NUMBER . . . . . . . .6 䡵 HOW TO USE THIS MANUAL . . . . . . . . . . . . . .4 䡵 VEHICLE MODIFICATIONS/ALTERATIONS . . . .7 䡵 WARNINGS AND CAUTIONS . . . . . . . . . . . . . .
4 INTRODUCTION When it comes to service, remember that your authorized dealer knows your vehicle best, has factory-trained techCongratulations on selecting your new Chrysler Group nicians and genuine parts, and cares about your satisfacLLC vehicle. Be assured that it represents precision tion. workmanship, distinctive styling, and high quality - all essentials that are traditional to our vehicles.
INTRODUCTION 5 1
6 INTRODUCTION WARNINGS AND CAUTIONS This Owners Manual contains WARNINGS against operating procedures that could result in a collision or bodily injury. It also contains CAUTIONS against procedures that could result in damage to your vehicle. If you do not read this entire Owners Manual, you may miss important information. Observe all Warnings and Cautions. VEHICLE IDENTIFICATION NUMBER The Vehicle Identification Number (VIN) is on the left front corner of the instrument panel.
INTRODUCTION 7 VEHICLE MODIFICATIONS/ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to a collision resulting in serious injury or death. VIN Location NOTE: It is illegal to remove or alter the VIN.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2 CONTENTS 䡵 A WORD ABOUT YOUR KEYS . . . . . . . . . . . . .12 ▫ To Arm The System . . . . . . . . . . . . . . . . . . . .19 ▫ Keyless Ignition Node (KIN) . . . . . . . . . . . . . .12 ▫ To Disarm The System . . . . . . . . . . . . . . . . . . .20 ▫ Key Fob . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 ▫ Security System Manual Override . . . . . . . . . . .21 ▫ Ignition Or Accessory On Message . . . . . . . . . .
10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ▫ Transmitter Battery Replacement . . . . . . . . . . .25 䡵 TRUNK LOCK AND RELEASE . . . . . . . . . . . . .42 ▫ General Information . . . . . . . . . . . . . . . . . . . .26 䡵 TRUNK SAFETY WARNING. . . . . . . . . . . . . . . .43 䡵 REMOTE STARTING SYSTEM — IF EQUIPPED . .27 ▫ Trunk Emergency Release . . . . . . . . . . . . . . . .44 ▫ How To Use Remote Start . . . . . . . . . . . . . . . .27 䡵 OCCUPANT RESTRAINTS . . . . . . . . . . . . . . . .
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11 ▫ Seat Belt Extender . . . . . . . . . . . . . . . . . . . . .59 䡵 SAFETY TIPS . . . . . . . . . . . . . . . . . . . . . . . . . .99 ▫ Supplemental Restraint System (SRS) — Air Bags . . . . . . . . . . . . . . . . . . . . . . . . . . . .59 ▫ Air Bag Deployment Sensors And Controls . . . .66 ▫ Event Data Recorder (EDR) . . . . . . . . . . . . . . .74 ▫ Child Restraints . . . . . . . . . . . . . . . . . . . . . . .75 䡵 ENGINE BREAK-IN RECOMMENDATIONS . . . .
12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The Keyless Ignition Node (KIN) has four operating positions, three of which are labeled and will illuminate Your vehicle uses a keyless ignition system. This system when in position. The three positions are OFF, ACC, and consists of a Key Fob with Remote Keyless Entry (RKE) ON/RUN. The fourth position is START, during start transmitter and a Keyless Ignition Node (KIN). RUN will illuminate.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 Key Fob The Key Fob also contains the Remote Keyless Entry (RKE) transmitter and an emergency key, which stores in the rear of the Key Fob. The emergency key allows for entry into the vehicle should the battery in the vehicle or the Key Fob go dead. The emergency key is also for locking/unlocking the glove compartment. You can keep the emergency key with you when valet parking.
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Mechanical Latch On The Back Of The Key Fob Emergency Key Removal NOTE: You can insert the double-sided emergency key into the lock cylinders with either side up.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15 Ignition Or Accessory On Message Opening the driver’s door when the ignition is in ACC or ON (engine not running), a chime will sound to remind you to cycle the ignition to OFF. In addition to the chime, the ignition or accessory on message will display in the cluster.
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) • Do not leave children or animals inside parked vehicles in hot weather. Interior heat build-up may cause serious injury or death. CAUTION! An unlocked car is an invitation to thieves. Always remove the Key Fob from vehicle, cycle the ignition OFF and lock all doors when leaving the vehicle unattended.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17 If the Vehicle Security Light turns on during normal vehicle operation (vehicle running for longer than 10 seconds), it indicates that there is a fault in the electronics. Should this occur, have the vehicle serviced as soon as possible by an authorized dealer. CAUTION! • Do not make modifications or alterations to the immobilizer system. Modifications or alterations to the immobilization system may result in a loss of security protection.
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Duplication of Key Fobs may be performed at an autho- • This device must accept any interference that may be received, including interference that may cause underized dealer. This procedure consists of programming a sired operation. blank Key Fob to the vehicle electronics. A blank Key Fob is one that has never been programmed.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 Rearming Of The System If something triggers the alarm, and no action is taken to disarm it, the Vehicle Security Alarm will turn the horn off after three minutes, turn all of the visual signals off after 15 additional minutes, and then the Vehicle Security Alarm will rearm itself. To Arm The System Follow these steps to arm the Vehicle Security Alarm: 1.
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Disarm The System NOTE: The Vehicle Security Alarm can be disarmed using any of • The driver’s door key cylinder and the trunk button on the following methods: the RKE transmitter cannot arm or disarm the Vehicle Security Alarm. • Press the UNLOCK button on the Remote Keyless Entry (RKE) transmitter. • When the Vehicle Security Alarm is armed, the interior power door lock switches will not unlock the doors.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 exterior lights will flash, the horn will sound. If this This feature also turns on the approach lighting in the outside mirrors (if equipped). Refer to “Mirrors” in occurs, disarm the Vehicle Security Alarm. “Understanding The Features Of Your Vehicle” for furTamper Alert ther information.
22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE REMOTE KEYLESS ENTRY (RKE) The RKE system allows you to lock or unlock the doors, open the trunk, or activate the Panic Alarm from distances up to approximately 66 ft (20 m) using a hand-held Key Fob with RKE transmitter. The RKE transmitter does not need to be pointed at the vehicle to activate the system. NOTE: Driving at speeds 5 mph (8 km/h) and above disables the system from responding to all RKE transmitter buttons for all RKE transmitters.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 To Unlock The Doors Flash Lights With Lock Push and release the UNLOCK button on the RKE transmitter once to unlock the driver’s door or twice within five seconds to unlock all doors. The turn signal lights will flash to acknowledge the unlock signal. The illuminated entry system will also turn on. This feature will cause the signal lights to flash when the doors are locked with the RKE transmitter. This feature can be turned on or turned off.
24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If the vehicle is equipped with Passive Entry, refer to Using The Panic Alarm “Keyless Enter-N-Go™” under “Things To Know Before To turn the Panic Alarm feature on or off, push and hold Starting Your Vehicle” for further information. the PANIC button on the RKE transmitter for at least one second and release.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 • You may need to be less than 35 ft (11 m) from the 1. Remove the emergency key by sliding the mechanical latch on the back of the RKE transmitter sideways vehicle when using the RKE transmitter to turn off the with your thumb and then pull the key out with your Panic Alarm due to the radio frequency noises emitted other hand. by the system. Programming Additional Transmitters Programming Key Fobs or RKE transmitters may be performed at an authorized dealer.
26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE of the RKE transmitter apart. Make sure not to damage the seal during removal. on the battery to the + sign on the inside of the battery clip, located on the back cover. Avoid touching the new battery with your fingers. Skin oils may cause battery deterioration. If you touch a battery, clean it with rubbing alcohol. 4. To assemble the RKE transmitter case, snap the two halves together.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27 NOTE: Changes or modifications not expressly approved NOTE: by the party responsible for compliance could void the • The vehicle must be equipped with an automatic user’s authority to operate the equipment. transmission to be equipped with Remote Start. If your RKE transmitter fails to operate from a normal • Obstructions between the vehicle and RKE transmitter distance, check for these two conditions: may reduce this range. 1.
28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Battery at an acceptable charge level • RKE panic button not pushed Remote Start Abort Message On Electronic Vehicle Information Center (EVIC) — If Equipped The following messages will display in the EVIC if the • System not disabled from previous remote start event vehicle fails to remote start or exits remote start prematurely: • Vehicle security alarm not active • Ignition in OFF position WARNING! • Do not start or run an engine in a closed garage or c
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29 • The engine can be started two consecutive times (two 15-minute cycles) with the RKE transmitter. However, the ignition must be cycled to the RUN position before Press and release the REMOTE START button you can repeat the start sequence for a third cycle. on the RKE transmitter twice within five seconds. The vehicle doors will lock, parking To Exit Remote Start Mode Without Driving The lights will flash and the horn will chirp twice (if Vehicle programmed).
30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE doors and disarm the Vehicle Security Alarm (if equipped). Then, prior to the end of the 15-minute cycle, push and release the START/STOP button. NOTE: The message “Push Start Button” will display in the EVIC until you push the START button. DOOR LOCKS Manual Door Locks To lock each door, push the door lock knob on each door trim panel downward. To unlock the front doors, pull the inside door handle to the first detent.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31 WARNING! WARNING! (Continued) • For personal security and safety in the event of a collision, lock the vehicle doors before you drive as well as when you park and leave the vehicle. • When leaving the vehicle, always remove the Key Fob from the ignition and lock your vehicle. • Never leave children alone in a vehicle, or with access to an unlocked vehicle. Allowing children to be in a vehicle unattended is dangerous for a number of reasons.
32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If you press the power door lock switch while the ignition is in the ACC or ON/RUN position, and any front door is open, the power locks will not operate. This prevents you from accidentally locking the Key Fob in the vehicle. Cycling the ignition to the OFF position or closing the door will allow the locks to operate. If a door is open, and the ignition is in the ACC or ON/RUN position, a chime will sound as a reminder to remove the Key Fob.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33 Automatic Unlock Doors On Exit Child-Protection Door Lock System — Rear The doors will unlock automatically on vehicles with Doors To provide a safer environment for small children riding power door locks if: in the rear seats, the rear doors are equipped with 1. The Automatic Unlock Doors On Exit feature is enChild-Protection Door Lock system. abled. To Engage Or Disengage The Child-Protection 2.
34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: For emergency exit from the rear seats when the Child-Protection Door Lock System is engaged, manually raise the door lock knob to the unlocked position, roll down the window, and open the door using the outside door handle. KEYLESS ENTER-N-GO™ Child-Protection Door Lock Function WARNING! Avoid trapping anyone in a vehicle in a collision.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 • If wearing gloves on your hands, or if it has been raining on the Passive Entry door handle, the unlock sensitivity can be affected, resulting in a slower response time. • If the vehicle is unlocked by the Passive Entry Door Handle and no door goes ajar within 60 seconds, the vehicle will re-lock and if equipped will arm the security alarm. To Unlock From The Driver’s Side With a valid Passive Entry RKE transmitter within 5 ft (1.
36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Unlock From The Passenger Side With a valid Passive Entry RKE transmitter within 5 ft (1.5 m) of the passenger door handle, grab the front passenger door handle to unlock all four doors automatically. The interior door panel lock knob will raise when the door is unlocked.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37 • The doors are locked using the LOCK button on the Passive Entry door handles. • The doors are manually locked using the door lock knobs. 2 • There is a valid Passive Entry RKE transmitter outside the vehicle and within 5 ft (1.5 m) of either Passive Entry door handle. • Three attempts are made to lock the doors using the door panel switch and then close the doors.
38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Lock The Vehicle’s Doors With one of the vehicle’s Passive Entry RKE transmitters within 5 ft (1.5 m) of the driver or passenger front door handles, press the door handle LOCK button to lock all four doors. Do NOT grab the door handle, when pressing the door handle lock button. This could unlock the door(s).
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39 NOTE: • After pressing the door handle LOCK button, you must wait two seconds before you can lock or unlock the doors, using either Passive Entry door handle. This is done to allow you to check if the vehicle is locked by pulling the door handle, without the vehicle reacting and unlocking. 2 • The Passive Entry system will not operate if the RKE transmitter battery is dead.
40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: For vehicles equipped with the Uconnect®, the power window switches will remain active for up to 10 minutes after the ignition is cycled to the OFF position. Opening either front door will cancel this feature. The time is programmable. Refer to “Uconnect® Settings” in “Understanding Your Instrument Panel” for further information. WARNING! Never leave children unattended in a vehicle, and do not let children play with power windows.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 41 To close the window part way, lift the window switch to Reset Auto-Up the first detent and release it when you want the window Should the Auto Up feature stop working, the window to stop. may need to be reset. To reset Auto Up: NOTE: 1. Make sure the door is fully closed. • If the window runs into any obstacle during auto- 2.
42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE (setting it in the DOWN position). To enable the window controls and the rear sunscreen, press and release the window lockout button again (setting it in the UP position). Wind Buffeting Wind buffeting can be described as the perception of pressure on the ears or a helicopter-type sound in the ears. Your vehicle may exhibit wind buffeting with the windows down, or the sunroof (if equipped) in certain open or partially open positions.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43 NOTE: The transmission must be in PARK before the With the ignition in the OFF position, the Trunk Open button will operate. symbol will display until the trunk is closed. Refer to “Keyless Enter-N-Go™” in “Things To Know The trunk lid can be released from Before Starting Your Vehicle” for more information on outside the vehicle by pressing the trunk operation with the Passive Entry feature.
44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Trunk Emergency Release As a security measure, a Trunk Internal Emergency Release lever is built into the trunk latching mechanism. In the event of an individual being locked inside the trunk, the trunk can be simply opened by pulling on the glow-in-the-dark handle attached to the trunk latching mechanism.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45 • Front seat belts incorporate pretensioners that may enhance occupant protection by managing occupant Some of the most important safety features in your energy during an impact event vehicle are the restraint systems: • Active Hood System • Three-point lap and shoulder belts for the driver and all passengers • All seat belt systems (except the driver’s) include Automatic Locking Retractors (ALRs), which lock the • Advanced Front Air Bags for driver and front
46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE infant and child restraint systems. For more information on LATCH, refer to Lower Anchors and Tether for CHildren (LATCH). NOTE: The Advanced Front Air Bags have a multistage inflator design. This allows the air bag to have different rates of inflation based on several factors, including the severity and type of collision.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47 If a child from 2 to 12 years old (not in a rear facing child 5. If the air bag system in this vehicle needs to be seat) must ride in the front passenger seat, move the seat modified to accommodate a disabled person, contact the Customer Center. Phone numbers are provided as far back as possible and use the proper child restraint. under ⴖIf You Need Assistanceⴖ. (Refer to “Child Restraints”).
48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) WARNING! (Continued) • Being too close to the steering wheel or instrument panel during Advanced Front Air Bag deployment could cause serious injury, including death. Air bags need room to inflate. Sit back, comfortably extending your arms to reach the steering wheel or instrument panel. • Supplemental Side Air Bag Inflatable Curtain (SABIC) and Seat-Mounted Side Air Bags (SAB) also need room to inflate.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49 Research has shown that seat belts save lives, and they can reduce the seriousness of injuries in a collision. Some of the worst injuries happen when people are thrown from the vehicle. Seat belts reduce the possibility of ejection and the risk of injury caused by striking the inside of the vehicle. Everyone in a motor vehicle should be belted at all times. Lap/Shoulder Belts All seating positions in your vehicle are equipped with lap/shoulder belts.
50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) • Two people should never be belted into a single seat belt. People belted together can crash into one another in a collision, hurting one another badly. Never use a lap/shoulder belt or a lap belt for more than one person, no matter what their size. Lap/Shoulder Belt Operating Instructions 1. Enter the vehicle and close the door. Sit back and adjust the seat. Pulling Out The Lap/Shoulder Belt Latch Plate 2.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 WARNING! • A belt that is buckled into the wrong buckle will not protect you properly. The lap portion could ride too high on your body, possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • A belt that is too loose will not protect you properly. In a sudden stop, you could move too far forward, increasing the possibility of injury. Wear your seat belt snugly.
52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) • A belt that is worn under your arm is dangerous. Your body could strike the inside surfaces of the vehicle in a collision, increasing head and neck injury. A belt worn under the arm can cause internal injuries. Ribs aren’t as strong as shoulder bones. Wear the belt over your shoulder so that your strongest bones will take the force in a collision. • A shoulder belt placed behind you will not protect you from injury during a collision.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53 WARNING! • A lap belt worn too high can increase the risk of internal injury in a collision. The belt forces won’t be at the strong hip and pelvic bones, but across your abdomen. Always wear the lap belt as low as possible and keep it snug. • A twisted belt may not protect you properly. In a collision, it could even cut into you. Be sure the belt is straight.
54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Adjustable Upper Shoulder Belt Anchorage As a guide, if you are shorter than average you will prefer a lower position, and if you are taller than average you will prefer a higher position. When you release the anchorage try to move it up and down to make sure that it is locked in position. In the driver and front passenger seats, the shoulder belt can be adjusted upward or downward to position the belt away from your neck.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55 3. Slide the latch plate upward over the folded webbing. • N/A — Not Applicable The folded webbing must enter the slot at the top of • ALR — Automatic Locking Retractor the latch plate. If the passenger seating position is equipped with an 4. Continue to slide the latch plate up until it clears the ALR and is being used for normal usage: folded webbing.
56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE the shoulder belt. The Automatic Locking Mode is available on all passenger-seating positions with a combination lap/shoulder belt. Use the Automatic Locking Mode anytime a child safety seat is installed in a seating position that has a belt with this feature. Children 12 years old and under should always be properly restrained in a vehicle with a rear seat. How To Engage The Automatic Locking Mode 1. Buckle the combination lap and shoulder belt. 2.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 57 NOTE: These devices are not a substitute for proper seat belt placement by the occupant. The seat belt still must be This vehicle has a safety belt system with an Energy worn snugly and positioned properly. Management feature in the front seating positions to help further reduce the risk of injury in the event of a head-on The pretensioners are triggered by the Occupant Restraint Controller (ORC). Like the air bags, the pretencollision.
58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Reminder Light and sounding an intermittent chime. Once the sequence starts, it will continue for the entire duration or until the respective seatbelts are fastened. After the sequence completes, the Seat Belt Reminder Light remains illuminated until the respective seat belts are fastened. The driver should instruct all other occupants to fasten their seat belts.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 59 Seat Belt Extender Supplemental Restraint System (SRS) — Air Bags If a seat belt is too short even when fully extended and when the adjustable upper shoulder belt anchorage (if equipped) is in its lowest position, your authorized dealer can provide you with a seat belt extender. This extender should be used only if the existing belt is not long enough. When it is not required, remove the extender and store it.
60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: The Driver and Front Passenger Advanced Front Air Bags are certified to the new Federal regulations for Advanced Air Bags. The Advanced Front Air Bags have a multistage inflator design. This allows the air bag to have different rates of inflation based on several factors, including the severity and type of collision.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 61 This vehicle is equipped with Supplemental Side Air Bag Inflatable Curtains (SABIC) to protect the driver, front, and rear passengers sitting next to a window. The SABIC air bags are located above the side windows and their covers are labeled: SRS AIRBAG.
62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Front and Side Impact Sensors • Front Seat Belt Pretensioners, Seat Belt Buckle Switch, and Seat Track Position Sensors Advanced Front Air Bag Features The Advanced Front Air Bag system has multistage driver and front passenger air bags. This system provides output appropriate to the severity and type of collision as determined by the Occupant Restraint Controller (ORC), which may receive information from the front impact sensors.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 63 When the air bag deploys, it opens the seam between the Supplemental Seat-Mounted Side Air Bags (SAB) may front and side of the seat’s trim cover. Each air bag provide enhanced protection to help protect an occupant deploys independently; a left side impact deploys the left air bag only and a right-side impact deploys the right air during a side impact. The SAB is marked with an air bag bag only. label sewn into the outboard side of the front seats.
64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The system includes side impact sensors that are calibrated to deploy the side air bags during impacts that require air bag occupant protection. WARNING! Supplemental Side Air Bag Inflatable Curtains (SABIC) Label Location NOTE: • Air Bag covers may not be obvious in the interior trim, but they will open during air bag deployment. • Being too close to the side air bags during deployment could cause you to be severely injured or killed.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 65 WARNING! (Continued) • Your vehicle is equipped with SABIC air bags, do not have any accessory items installed which will alter the roof, including adding a sunroof to your vehicle. Do not add roof racks that require permanent attachments (bolts or screws) for installation on the vehicle roof. Do not drill into the roof of the vehicle for any reason. SAB and SABIC air bags are a supplement to the seat belt restraint system.
66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Air Bag Deployment Sensors And Controls Occupant Restraint Controller (ORC) and Supplemental Driver Side Knee Air Bag are not expected to reduce the risk of injury in rear, side, or rollover collisions. The ORC is part of a Federally regulated safety system The Advanced Front Air Bags and Supplemental Driver required for this vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 67 Because air bag sensors measure vehicle deceleration The ORC contains a backup power supply system that over time, vehicle speed and damage by themselves are may deploy the air bags even if the battery loses power or not good indicators of whether or not an air bag should it becomes disconnected prior to deployment. have deployed.
68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! Ignoring the Air Bag Warning Light in your instrument panel could mean you won’t have the air bags to protect you in a collision. If the light does not come on as a bulb check when the ignition is first turned on, stays on after you start the vehicle, or if it comes on as you drive, have an authorized dealer service the air bag system immediately.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 69 Supplemental Driver Side Knee Air Bag. The trim cover separates and folds out of the way allowing the air bag to inflate to the full size. The air bag fully inflates in about 15 to 20 milliseconds. at a very high speed and with such a high force that it could injure you if you are not seated properly, or if items are positioned in the area where the side air bag inflates. This especially applies to children.
70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE positioned in the area where the side curtain air bag event the ORC will determine whether to have the inflates. This especially applies to children. The side Enhanced Accident Response System perform the followcurtain air bag is only about 3-1/2 in (9 cm) thick when ing functions: it is inflated. • Cut off fuel to the engine.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 71 If A Deployment Occurs The Advanced Front Air Bags are designed to deflate immediately after deployment. However, if you haven’t healed significantly within a few days, or if you have any blistering, see your doctor immediately. • As the air bags deflate, you may see some smoke-like particles. The particles are a normal by-product of the process that generates the non-toxic gas used for air bag inflation.
72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! Deployed air bags and seat belt pretensioners cannot protect you in another collision. Have the air bags, seat belt pretensioners, and the front seat belt retractor assemblies replaced by an authorized dealer immediately. Also, have the Occupant Restraint Controller (ORC) system serviced as well. Maintaining Your Air Bag System WARNING! • Modifications to any part of the air bag system could cause it to fail when you need it.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 73 WARNING! (Continued) • Do not attempt to modify any part of your air bag system. The air bag may inflate accidentally or may not function properly if modifications are made. Take your vehicle to an authorized dealer for any air bag system service. If your seat, including your trim cover and cushion, needs to be serviced in any way (including removal or loosening/tightening of seat attachment bolts), take the vehicle to your authorized dealer.
74 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: If the speedometer, tachometer, or any engine related gauges are not working, the Occupant Restraint Controller (ORC) may also be disabled. The air bags may not be ready to inflate for your protection. Promptly check the fuse block for blown fuses. Refer to “Fuses” in “Maintaining Your Vehicle” for the proper air bag fuses. See your authorized dealer if the fuse is good.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 75 To read data recorded by an EDR, special equipment is required, and access to the vehicle or the EDR is needed. In addition to the vehicle manufacturer, other parties, such as law enforcement, that have the special equipment, can read the information if they have access to the vehicle or the EDR. Child Restraints There are different sizes and types of restraints for children from newborn size to the child almost large enough for an adult safety belt.
76 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: • For additional information, refer to www.seatcheck.org or call 1–866–SEATCHECK. Canadian residents should refer to Transport Canada’s website for additional information: • http://www.tc.gc.ca/eng/roadsafety/safedriverschildsafety-index-53.htm WARNING! In a collision, an unrestrained child can become a projectile inside the vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 77 Summary Of Recommendations For Restraining Children In Vehicles Infants and Toddlers Small Children Larger Children Children Too Large for Child Restraints Child Size, Height, Weight Or Age Children who are two years old or younger and who have not reached the height or weight limits of their child restraint Children who are at least two years old or who have out-grown the height or weight limit of their rear-facing child restraint Children who have out-g
78 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Infants And Child Restraints Safety experts recommend that children ride rearwardfacing in the vehicle until they are two years old or until they reach either the height or weight limit of their rear facing child safety seat. Two types of child restraints can be used rearward-facing: infant carriers and convertible child seats. The infant carrier is only used rearward-facing in the vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 79 remain in a forward-facing child seat with a harness for as long as possible, up to the highest weight or height allowed by the child seat. All children whose weight or height is above the forward-facing limit for the child seat should use a belt-positioning booster seat until the vehicle’s seat belts fit properly.
80 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Children Too Large For Booster Seats Children who are large enough to wear the shoulder belt comfortably, and whose legs are long enough to bend over the front of the seat when their back is against the seatback, should use the seat belt in a rear seat. Use this simple 5-step test to decide whether the child can use the vehicle’s seat belt alone: 1. Can the child sit all the way back against the back of the vehicle seat? 2.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 81 Recommendations For Attaching Child Restraints Restraint Type Combined Weight of the Child + Child Restraint Rear-Facing Child Restraint Rear-Facing Child Restraint Forward-Facing Child Restraint Forward-Facing Child Restraint Up to 65 lbs (29.5 kg) More than 65 lbs (29.5 kg) Up to 65 lbs (29.5 kg) More than 65 lbs (29.
82 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Lower Anchors And Tethers For Children (LATCH) Restraint System Your vehicle is equipped with the child restraint anchorage system called LATCH, which stands for Lower Anchors and Tethers for CHildren. The LATCH system has three vehicle anchor points for installing LATCHequipped child seats. There are two lower anchorages located at the back of the seat cushion where it meets the seatback and one top tether anchorage located behind the seating position.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 83 LATCH Positions For Installing Child Restraints In This Vehicle 2 Lower Anchorage Symbol 2 anchorages per seating position Top Tether Anchorage Symbol
84 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE What is the weight limit (child’s weight + weight of the child restraint) for using the LATCH anchorage system to attach the child restraint? 65 lbs (29.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 85 Can two child restraints be attached using a common lower LATCH anchorage? No Can the rear-facing child restraint touch the back of the front passenger seat? Yes Can the head restraints be removed? Yes, center position only. Never “share” a LATCH anchorage with two or more child restraints.
86 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Locating The LATCH Anchorages The lower anchorages are round bars that are found at the rear of the seat cushion where it meets the seatback, below the anchorage symbols on the seatback. They are just visible when you lean into the rear seat to install the child restraint. You will easily feel them if you run your finger along the gap between the seatback and seat cushion.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 87 Locating The LATCH Anchorages There are tether strap anchorages behind each rear seating position located in the panel between the rear seatback and the rear window. They are found under a plastic cover with the tether anchorage symbol on it. 2 Tether Strap Anchorages LATCH-compatible child restraint systems will be equipped with a rigid bar or a flexible strap on each side.
88 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE tether strap. The tether strap will have a hook at the end Always follow the directions of the child restraint to attach to the top tether anchorage and a way to tighten manufacturer when installing your child restraint. Not the strap after it is attached to the anchorage. all child restraint systems will be installed as described here.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 89 may need to recline the seat and/or raise the head 7. Test that the child restraint is installed tightly by restraint to get a better fit. If the rear seat can be moved pulling back and forth on the child seat at the belt path. It should not move more than 1 inch (25.4 mm) forward and rearward in the vehicle, you may wish to in any direction. move it to its rear-most position to make room for the child seat.
90 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • Improper installation of a child restraint to the LATCH anchorages can lead to failure of an infant or child restraint. The child could be badly injured or killed. Follow the manufacturer’s directions exactly when installing an infant or child restraint. • Child restraint anchorages are designed to withstand only those loads imposed by correctly-fitted child restraints.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 91 Lap/Shoulder Belt Systems for Installing Child Restraints in this Vehicle 2
92 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE What is the weight limit (child’s weight + weight of the child restraint) for using the Tether Anchor with the seat belt to attach a forward facing child restraint? Can the rear-facing child restraint touch the back of the front passenger seat? Weight limit of the Child Restraint Can the head restraints be removed? Can the buckle stalk be twisted to tighten the seat belt against the belt path of the child restraint? Yes, center position only.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 93 Installing A Child Restraint With A Switchable Automatic Locking Retractor (ALR) 4. Pull on the webbing to make the lap portion tight against the child seat. 1. Place the child seat in the center of the seating 5. To lock the seat belt, pull down on the shoulder part of position.
94 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE the tether strap to the anchorage and tighten the tether strap. See the section “Installing Child Restraints Using the Top Tether Anchorage” for directions to attach a tether anchor. 9. Test that the child restraint is installed tightly by pulling back and forth on the child seat at the seat belt path. It should not move more than 1 inch (25.4 mm) in any direction.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 95 strap. Refer to “Installing Child Restraints Using The If the belt still cannot be tightened after you shorten the Top Tether Anchorage” for directions to attach a tether buckle, disconnect the latch plate from the buckle, turn the buckle around one half turn, and insert the latch plate anchor. into the buckle again. If you still cannot make the child 6.
96 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. Rotate or lift the cover to access the anchor directly behind the seat where you are placing the child restraint. 3. Route the tether strap to provide the most direct path for the strap between the anchor and the child seat. If your vehicle is equipped with adjustable rear head restraints, raise the head restraint, and where possible, route the tether strap under the head restraint and between the two posts.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 97 2 Adjustable Headrest Downward Position Tether Strap Mounting 1 — Cover 3 — Attaching Strap A — Tether Strap Hook B — Tether Anchor 4. Attach the tether strap hook of the child restraint to the top tether anchorage as shown in the diagram. 5. Remove slack in the tether strap according to the child restraint manufacturer’s instructions.
98 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • An incorrectly anchored tether strap could lead to increased head motion and possible injury to the child. Use only the anchorage position directly behind the child seat to secure a child restraint top tether strap. • If your vehicle is equipped with a split rear seat, make sure the tether strap does not slip into the opening between the seatbacks as you remove slack in the strap.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 99 CAUTION! WARNING! Never use Non-Detergent Oil or Straight Mineral Oil in the engine or damage may result. • Do not leave children or animals inside parked vehicles in hot weather. Interior heat build-up may cause serious injury or death. • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed.
100 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Exhaust Gas WARNING! (Continued) WARNING! Exhaust gases can injure or kill. They contain carbon monoxide (CO), which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you. To avoid breathing (CO), follow these safety tips: • Do not run the engine in a closed garage or in confined areas any longer than needed to move your vehicle in or out of the area.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 101 Safety Checks You Should Make Inside The Vehicle Seat Belts not lit during starting, see your authorized dealer. If the light stays on, flickers, or comes on while driving, have the system checked by an authorized dealer. Inspect the seat belt system periodically, checking for cuts, frays, and loose parts. Damaged parts must be replaced immediately. Do not disassemble or modify the system.
102 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! WARNING! (Continued) Pedals that cannot move freely can cause loss of vehicle control and increase the risk of serious personal injury. • Always make sure that floor mats are properly attached to the floor mat fasteners. • Never place or install floor mats or other floor coverings in the vehicle that cannot be properly secured to prevent them from moving and interfering with the pedals or the ability to control the vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 103 Periodic Safety Checks You Should Make Outside The Vehicle Door Latches Tires Fluid Leaks Examine tires for excessive tread wear and uneven wear patterns. Check for stones, nails, glass, or other objects lodged in the tread or sidewall. Inspect the tread for cuts and cracks. Inspect sidewalls for cuts, cracks and bulges. Check the wheel nuts for tightness. Check the tires (including spare) for proper cold inflation pressure.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS 䡵 MIRRORS . . . . . . . . . . . . . . . . . . . . . . . . . . . .112 ▫ Automatic Dimming Mirror . . . . . . . . . . . . . .112 ▫ Outside Mirrors . . . . . . . . . . . . . . . . . . . . . .113 ▫ Outside Mirrors Folding Feature — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . .113 ▫ Power Folding Outside Mirrors — If Equipped. . . . . . . . . . . . . . . . . . . . . . . . . .115 ▫ Heated Mirrors — If Equipped . . . . . . . . . . . .
106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 䡵 Uconnect® PHONE (8.4/8.4N) . . . . . . . . . . . . .127 ▫ Power Seats . . . . . . . . . . . . . . . . . . . . . . . . .177 ▫ Uconnect® 8.4/8.4Nav . . . . . . . . . . . . . . . . . .127 ▫ Power Lumbar — If Equipped . . . . . . . . . . . .180 ▫ Operation . . . . . . . . . . . . . . . . . . . . . . . . . .130 ▫ Heated Seats — If Equipped . . . . . . . . . . . . .181 ▫ Phone Call Features . . . . . . . . . . . . . . . . . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 107 䡵 LIGHTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . .194 ▫ Turn Signals . . . . . . . . . . . . . . . . . . . . . . . . .200 ▫ Headlight Switch . . . . . . . . . . . . . . . . . . . . .194 ▫ Lane Change Assist . . . . . . . . . . . . . . . . . . .201 ▫ Automatic Headlights — If Equipped . . . . . . .195 ▫ High/Low Beam Switch . . . . . . . . . . . . . . . .201 ▫ Headlights On With Wipers (Available With Automatic Headlights Only) . . . . . .
108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Headlights On With Wipers (Available With Automatic Headlights Only) . . . . . . . . . . . . .208 ▫ Rain Sensing Wipers — If Equipped . . . . . . . .208 䡵 TILT/TELESCOPING STEERING COLUMN . . .210 䡵 POWER TILT/TELESCOPING STEERING COLUMN — IF EQUIPPED. . . . . . . . . . . . . . . .211 䡵 HEATED STEERING WHEEL — IF EQUIPPED . . . . . . . . . . . . . . . . . . . . . . . . .213 䡵 ADJUSTABLE PEDALS — IF EQUIPPED . . . . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 109 ▫ Setting The Following Distance In ACC . . . . . .230 ▫ Front Park Assist Audible Alerts . . . . . . . . . . .254 ▫ Overtake Aid . . . . . . . . . . . . . . . . . . . . . . . .234 ▫ Enabling And Disabling ParkSense® . . . . . . . .254 ▫ Adaptive Cruise Control (ACC) Menu . . . . . . .235 ▫ Service The ParkSense® Park Assist System . . .254 ▫ Display Warnings And Maintenance . . . . . . . .236 ▫ Cleaning The ParkSense® System . . . . . . . . . .
110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Programming A Rolling Code . . . . . . . . . . . . .264 ▫ Venting Sunroof — Express . . . . . . . . . . . . . .274 ▫ Programming A Non-Rolling Code . . . . . . . . .266 ▫ Sunshade Operation. . . . . . . . . . . . . . . . . . . .274 ▫ Canadian/Gate Operator Programming . . . . . .268 ▫ Wind Buffeting . . . . . . . . . . . . . . . . . . . . . . .274 ▫ Using HomeLink® . . . . . . . . . . . . . . . . . . . .269 ▫ Sunroof Maintenance . . . . . . . . . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 111 ▫ Closing Power Shade — Express . . . . . . . . . . .278 ▫ Console Features . . . . . . . . . . . . . . . . . . . . .288 ▫ Closing Power Shade — Manual Mode . . . . . .278 ▫ Door Storage . . . . . . . . . . . . . . . . . . . . . . . . .289 ▫ Venting Sunroof — Express . . . . . . . . . . . . . .278 ▫ Rear Seat Armrest Storage — If Equipped . . . .290 ▫ Pinch Protect Feature . . . . . . . . . . . . . . . . . . .
112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE MIRRORS Automatic Dimming Mirror This mirror automatically adjusts for headlight glare from vehicles behind you. This feature will be defaulted on, and is only disabled when the vehicle is moving in reverse. NOTE: This feature is disabled when the vehicle is moving in reverse. Automatic Dimming Mirror CAUTION! To avoid damage to the mirror during cleaning, never spray any cleaning solution directly onto the mirror.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 113 Outside Mirrors Outside Mirrors Folding Feature — If Equipped To receive maximum benefit, adjust the outside mirror(s) Some models have outside mirrors that are hinged. The to center on the adjacent lane of traffic and a slight hinge allows the mirror to pivot forward and rearward to overlap of the view obtained from the inside mirror. resist damage. The hinge has three detent positions: full forward, full rearward and normal.
114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Three of the LEDs are turn signal indicators, which flash with the corresponding turn signal lights in the front and rear of the vehicle. Turning on the Hazard Warning flashers will also activate these LEDs. The fourth LED supplies illuminated entry lighting, which turns on in both mirrors when you use the Remote Keyless Entry (RKE) transmitter or open any door. This LED shines outward to illuminate the front and rear door handles.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 115 The power mirror controls consist of mirror select butThe power mirror controls are located on the driver’s tons and a four-way mirror control switch. To adjust a mirror, press either the L (left) or R (right) button to select door trim panel. the mirror that you want to adjust. Power Mirrors NOTE: A light in the select button will illuminate indicating the mirror is activated and can be adjusted.
116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Press the switch once and the mirrors will fold in, Illuminated Vanity Mirrors — If Equipped pressing the switch a second time will return the mirrors An illuminated vanity mirror is located on the sun visor. to the normal driving position. To use the mirror, rotate the sun visor downward and NOTE: If the vehicle speed is greater than 10 mph swing the mirror cover upward. The light turns on automatically. Closing the mirror cover turns off the light.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 117 “Slide-On-Rod” And Extender Features Of Sun Visor To use the “Slide-On-Rod” feature of the sun visor, rotate the sun visor downward and swing the sun visor so it is parallel to the side window, grab the sun visor and pull rearwards until the sun visor is in the desired position. To use the extender feature of the sun visor, grab the extender which is located at the rear of the visor and pull rearward.
118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE BLIND SPOT MONITORING (BSM) — IF EQUIPPED The Blind Spot Monitoring (BSM) system uses two radarbased sensors, located inside the rear bumper fascia, to detect highway licensable vehicles (automobiles, trucks, motorcycles, etc.) that enter the blind spot zones from the rear/front/side of the vehicle.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 119 vehicle when the vehicle speed reaches approximately 6 m.p.h. (10 km/h) or higher and will alert the driver of vehicles in these areas. NOTE: • The BSM system does NOT alert the driver about rapidly approaching vehicles that are outside the detection zones. • The BSM system detection zone DOES NOT change if your vehicle is towing a trailer. Therefore, visually verify the adjacent lane is clear for both your vehicle and trailer before making a lane change.
120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE contamination so that the BSM system can function properly. Do not block the area of the rear fascia where the radar sensors are located with foreign objects (bumper stickers, bicycle racks, etc.). The BSM system notifies the driver of objects in the detection zones by illuminating the BSM warning light located in the outside mirrors in addition to sounding an audible (chime) alert and reducing the radio volume.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 121 Entering From The Side Entering From The Rear Vehicles that move into your adjacent lanes from either Vehicles that come up from behind your vehicle on either side of the vehicle. side and enter the rear detection zone with a relative speed of less than 30 m.p.h. (48 km/h).
122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Overtaking Traffic If you pass another vehicle slowly with a relative speed of less than 15 m.p.h. (24 km/h) and the vehicle remains in the blind spot for approximately 1.5 seconds, the warning light will be illuminated. If the difference in speed between the two vehicles is greater than 15 m.p.h. (24 km/h), the warning light will not illuminate.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 123 3 Overtaking/Passing The BSM system will not alert you of objects that are traveling in the opposite direction of the vehicle in adjacent lanes.
124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! (Continued) system is not designed to detect pedestrians, bicyclists, or animals. Even if your vehicle is equipped with the BSM system, always check your vehicle’s mirrors, glance over your shoulder, and use your turn signal before changing lanes. Failure to do so can result in serious injury or death. Rear Cross Path Opposing Traffic WARNING! The Blind Spot Monitoring system is only an aid to help detect objects in the blind spot zones.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 125 NOTE: In a parking lot situation, oncoming vehicles can be obscured by vehicles parked on either side. If the sensors are blocked by other structures or vehicles, the system will not be able to alert the driver. When RCP is on and the vehicle is in REVERSE, the driver is alerted using both the visual and audible alarms, including reducing the radio volume.
126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE turn signal is then activated, and it corresponds to an alert present on that side of the vehicle, an audible chime Three selectable modes of operation are available in the will also be sounded. Whenever a turn signal and deUconnect® System. Refer to “Uconnect® Settings/ tected object are present on the same side at the same Customer Programmable Features” in “Understanding time, both the visual and audio alerts will be issued.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 127 2. The device must accept any interference received, including interference that may cause undesired opWhen the BSM system is turned off there will be no eration of the device. visual or audible alerts from either the BSM or RCP Changes or modifications to any of these systems by systems. other than an authorized service facility could void NOTE: The BSM system will store the current operating authorization to use this equipment.
128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Hands Free text to speech listening of your incoming Screen Activated Features SMS messages. • Dialing via Keypad using touchscreen. • Hands Free text messaging (“Send a message to John • Viewing and Calling contacts from Phonebooks disSmith Mobile”). played on the touchscreen. • Redialing last dialed numbers (“Redial”).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129 NOTE: Your phone must be capable of SMS messaging via Bluetooth® for messaging features to work properly. Your mobile phone’s audio is transmitted through your vehicles audio system; the system will automatically mute your radio when using the Uconnect® Phone.
130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE phone and one audio device can be used with the system your vehicle is equipped. Please see the Uconnect® at a time. The system is available in English, Spanish, or Voice Command section for direction on how to use the button. French languages. The Uconnect® Phone is fully integrated with the vehicles audio system.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131 2. Say the individual commands and allow the system to guide you to complete the task. You will be prompted for a specific command and then guided through the available options. • Prior to giving a voice command, one must wait for the beep, which follows the “Listen” prompt or another prompt. • For certain operations, compound commands can be used.
132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Smith.” For multiple inputs in the same phrase or sentence, the system identifies the topic or context and provides the associated follow-up prompt such as “Who do you want to call?” in the case where a phone call was requested but the specific name was not recognized. To activate the Uconnect® Phone from idle, simply press the button on your steering wheel and say a command or say “help.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133 NOTE: • You must have Bluetooth® enabled on your mobile phone to complete this procedure. • The vehicle must be in PARK. 3 To complete the pairing process, you will need to reference your mobile phone Owner’s Manual. The Uconnect® website may also provide detailed instructions for pairing. 1. Touch the “Phone” soft-key on the screen to begin. 2. If there is no phone currently connected with the system, a pop-up will appear. Mobile Phone Pairing 3.
134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Touch the “Add Device” soft-key. • Search for available devices on your Bluetooth® enabled mobile phone. When prompted on the phone, enter the name and PIN shown on the Uconnect® screen. • See step 4 to complete the process. 4. Uconnect® Phone will display an in progress screen while the system is connecting. Mobile Phone Pairing Progress 5.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 135 NOTE: For phones which are not made a favorite, the phone priority is determined by the order in which it was 1. Touch the “Settings” soft-key from the Phone main paired. The latest phone paired will have the higher screen. priority. 2. Touch the “Add Device” soft-key. You can also use the following VR commands to bring up Pair Additional Mobile Phones 3.
136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: If there is no device currently connected with the You can also use the following VR command to bring up system, a pop-up will appear. a list of paired audio devices: 5. Search for available devices on your Bluetooth® en- • “Show Paired Phones” abled audio device. When prompted on the device, • “Connect My Phone” enter the PIN shown on the Uconnect® screen. Connecting To A Particular Mobile Phone Or 6.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137 Disconnecting A Phone Or Audio Device 4. The options pop-up will be displayed. 1. Touch the “Settings” soft-key. 5. Touch the “Delete Device” soft-key. 2. Touch the “Paired Phone” or “Audio Device” soft-key. 6. Touch the “X” to exit out of the Settings screen. 3. Touch the “+” soft-key located to the right of the Making A Phone Or Audio Device A Favorite device name. 1. Touch the “Settings” soft-key. 4. The options pop-up will be displayed. 2.
138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Phonebook Download (Automatic Phonebook Transfer From Mobile Phone) — If Equipped • A maximum of 1000 entries per phone will be downloaded and updated every time a phone is connected to the Uconnect® Phone.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139 Managing Your Favorite Phonebook There are three ways you can add an entry to your Favorite Phonebook. 1. During an active call of a number to make a favorite, touch and hold a favorite button on the top of the phone main screen. 2. After loading the mobile phonebook, select Phonebook from the Phone main screen, then select the appropriate number. Touch the + next to the selected number to display the options pop-up. In the pop-up select “Add to Favorites.
140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE touch the “+” on that selected entry. When the Options To Remove A Favorite pop-up appears, touch “Add from Mobile.” You will 1. To remove a Favorite, select phonebook from the then be asked which contact and number to choose Phone main screen. from your mobile phonebook. When complete the 2. Next select Favorites on the left side of the screen and new favorite will be shown. then touch the + Options soft-key. 3.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141 Emergency And Towing Assistance The Emergency and Towing Assistance Favorite numbers can only be altered. These cannot be deleted and the names cannot be changed. To change the Emergency or Towing Assistance numbers follow these steps. 1. Touch the “Phonebook” soft-key from the Phone main screen. Remove From Favorites 2. Touch the “Favorites” soft-key. Scroll to the bottom of the list to locate the Emergency and Towing Assistance Favorites. 4.
142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Phone Call Features The following features can be accessed through the Uconnect® Phone if the feature(s) are available and supported by Bluetooth® on your mobile service plan. For example, if your mobile service plan provides threeway calling, this feature can be accessed through the Uconnect® Phone. Check with your mobile service provider for the features that you have.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143 • Mobile Phonebook • Recent Call Log • SMS Message Viewer Dial By Saying A Number 1. Press the button to begin, 3. The Uconnect® Phone will dial the number associated with John Doe, or if there are multiple numbers it will ask which number you want to call for John Doe. Call Controls The touchscreen allows you to control the following call features: 2. After the “Listening” prompt and the following beep, • say “Dial 151 1234 5555,” • 3.
144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Touch-Tone Number Entry 1. Touch the “Phone” soft-key. 2. Touch the “Dial” soft-key. 3. The Touch-Tone screen will be displayed. 4. Use the numbered soft-keys to enter the number and touch “Call.” To send a touch tone using Voice Recognition (VR), press button on your steering wheel while in a call the and say “Send 1234#” or you can say “Send Voicemail Password” if Voicemail password is stored in your mobile phonebook.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 145 These can be accessed by touching the “recent calls” Answer Or Ignore An Incoming Call — Call Currently In Progress soft-key on the Phone main screen. button and say “Show my If a call is currently in progress and you have another You can also press the incoming calls” from any screen and the Incoming incoming call, you will hear the same network tones for call waiting that you normally hear when using your calls will be displayed.
146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE phonebooks. To go back to the first call, refer to “Toggling Call Termination Between Calls” in this section. To combine two calls, refer To end a call in progress, momentarily press the butto “Join Calls” in this section. ton on the steering wheel or the “end” soft-key. Only the active call(s) will be terminated and if there is a call Place/Retrieve A Call From Hold on hold, it will become the new active call.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 147 NOTE: The call will remain within the vehicle audio system until the phone becomes out of range for the Bluetooth® connection. It is recommended to touch the “transfer” soft-key when leaving the vehicle. Uconnect® Phone Features Emergency Assistance instruct the paired mobile phone to call the emergency number. This feature is supported in the U.S., Canada, and Mexico. NOTE: • The Emergency call may also be initiated by using the touchscreen.
148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Your phone must be turned on and connected to the Uconnect® Phone to allow use of this vehicle feature in emergency situations, when the mobile phone has network coverage and stays connected to the Uconnect® Phone. 24-Hour “Roadside Assistance” coverage details in the Warranty Information Booklet and on the 24-Hour Roadside Assistance Card. Voice Mail Calling To learn how to access your voice mail, refer to “Working with Automated Systems”.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 149 on your mobile phone keypad, you can utilize the button on the steering touchscreen or press the wheel and say the word “Send” then the sequence you wish to enter. For example, if required to enter your PIN followed with a pound, (3 7 4 6 #), you can press button on the steering wheel and say, “Send 3 the 7 4 6 #.
150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE your voice command immediately. For example, if a prompt is asking “There are two numbers with the name John. Say the full name” you could press the button on the steering wheel and say, “John Smith” to select that option without having to listen to the rest of the voice prompt. Phone And Network Status Indicators Voice Response Length Dialing Using The Mobile Phone Keypad It is possible for you to choose between Brief and Detailed Voice Response Length.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 151 WARNING! (Continued) of any handheld device while driving, encourage the use of voice-operated systems when possible and that you become aware of applicable laws that may affect the use of electronic devices while driving. call did not go through even though the call is in progress. Once your call is answered, you will hear the audio.
152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Connect Or Disconnect Link Between The Uconnect® Phone And Mobile Phone • Ensure that no one other than you is speaking during a voice command period. If you would like to connect or disconnect the Bluetooth® Performance is maximized under: connection between a Uconnect® Phone paired mobile • Low-To-Medium Blower Setting phone and the Uconnect® Phone, follow the instructions • Low-To-Medium Vehicle Speed described in your mobile phone User’s Manual.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 153 NOTE: It is recommended that you do not store names in • Dry Weather Conditions your favorites phonebook while the vehicle is in motion. • Operation From The Driver’s Seat Phonebook (Mobile and Favorites) name recognition rate Performance such as audio clarity, echo, and loudness to is optimized when the entries are not similar. You can say a large degree rely on the phone and network, and not “O” (letter “O”) for “0” (zero). the Uconnect® Phone.
154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Bluetooth® the “Messaging” button will be grayed out Read Messages: and the feature will not be available for use. If you receive a new text message while your phone is connected to Uconnect® Phone, an announcement will be made to notify you that you have a new text message. Voice Text List NOTE: Uconnect® Phone SMS is only available when the vehicle is not moving.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 155 Once a message is received and viewed or listened to, you will have the following options: • Send a Reply • Forward 3 • Call Send Messages Using Soft-Keys: You can send messages using Uconnect® Phone. To send a new message: 1. Touch the “Phone” soft-key. 2. Touch the “messaging” soft-key then “New Message.” Preset Message List 4. If multiple numbers are available for the contact select which number you would like to have the message 3.
156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Send Messages Using Voice Commands: 1. Press the button. 2. After the “Listening” prompt and the following beep, say “Send message to John Smith mobile.” 3. After the system prompts you for what message you want to send, say the message you wish to send or say “List.” There are 18 preset messages. While the list of defined messages are being read, you can button and interrupt the system by pressing the saying the message you want to send.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 157 4. I can’t talk right now. 17. I’m lost. 5. Call me. 18. See you later. 6. I’ll call you later. Bluetooth® Communication Link 7. I’m on my way. Mobile phones have been found to lose connection to the Uconnect® Phone. When this happens, the connection can generally be re-established by switching the mobile phone OFF/ON. Your mobile phone is recommended to remain in Bluetooth® ON mode. 8. Thanks. 9. I’ll be late. 10. I will be minutes late. 11.
158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Voice Tree
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 159 6. Send dial tones for automated systems is available while a call is active. This is an example that uses a You can replace “John Smith” with any name in your Phonebook Record named “Voicemail Password.” mobile or favorite phone book. You can also say “Send a message to John Smith” and the system will ask you 7.
160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 161 NOTE: 5. You can replace “248 555 1212” with any phone number supported by your Mobile phone. 1. You can replace “John Smith” with any name in your mobile or favorite phone book. You can also say “Send 6. You can replace “4” with any message number shown a message to John Smith” and the system will ask you on the screen. which phone number you want to send a message to 7. If your phone does not support phonebook download for John Smith.
162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 163 NOTE: Available Voice Commands are shown in bold VOICE COMMAND face and underlined in the gray shaded boxes. Uconnect® 8.4/8.4 Nav General Information This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: The Uconnect® Voice Command system allows you to control your AM, FM radio, satellite radio, disc player, SD Card, USB/iPod® and SiriusXM Travel Link.
164 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Any voice commanded system should be used only in safe driving conditions following all applicable laws, including laws regarding phone use. Your attention should be focused on safely operating the vehicle. Failure to do so may result in a collision causing serious injury or death. If no command is spoken the system will say one of two responses: • I didn’t understand • I didn’t get that, etc.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 165 Pressing the Uconnect® Voice Command button while the system is speaking is known as “barging in.” The system will be interrupted, and after the beep, you can say a command. This will become helpful once you start to learn the options. When using this system, you should speak clearly and at a normal speaking volume. The system will best recognize your speech if the windows are closed, and the heater/air conditioning fan is set to low.
166 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The system utilizes continuous dialog; when the system requires more information from the user it will ask a Natural speech allows the user to speak commands in question to which the user can respond without pressing phrases or complete sentences. The system filters out button. the Uconnect® Voice Command certain non-word utterances and sounds such as “ah” and “eh.” The system handles fill-in words such as “I Uconnect® Voice Commands would like to.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 167 Changing The Volume 1. Start a dialogue by pressing the Voice Command button. Starting Voice Recognition (VR) Session In Radio/Player Modes In this mode, you can say the following commands: NOTE: The commands can be said on any screen when a call is not active after pushing the Uconnect® Voice 3. Use the ON/OFF VOLUME rotary knob to adjust the button. Command volume to a comfortable level while the Voice Command system is speaking.
168 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Voice Tree
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 169 NOTE: • You can replace “950 AM” with any other AM or FM frequency, such as “98.7 FM.” • You can replace “80’s on 8” with any other satellite station name received by the radio. • You can replace “8” with any other satellite channel number received by the radio. • You can replace “rock” with any of the satellite music types. NOTE: Available Voice Commands are shown in bold face and shaded grey.
170 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 171 NOTE: • You can replace the album, artist, song, genre, playlist, podcast and audio book names with any corresponding names on the current device that is playing. • You can replace “8” with any track on the CD that is currently playing. Command is only available when CD is playing. • Playlist, Podcast and audio book commands are only available when the iPod® is connected and playing.
172 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 173 NOTE: • You can replace “NFL” with any league shown on the sports league screen. For example you can say “Show MLB headlines” or “Show PGA headlines.” • You can replace “Headlines” with any menu items shown on a league screen. For example you can say “Show NFL Schedule and results” or “Show NCAA Basketball AP top 25” or “Show Major League Baseball Teams.
174 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 175 NOTE: • Only available with Navigation equipped vehicles. • You can replace “Player” with “Radio,” “Navigation,” “Phone,” “Climate,” “More” or “Settings.” • Navigation commands only work if equipped with Navigation. NOTE: Available Voice Commands are shown in bold face and shaded grey.
176 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 177 NOTE: • You can also say “Find City,” “Find Favorite,” “Find Play by Category,” “Find Play by Name,” “Find Recently Found,” “Where to?” or “Go Home.” • You can say “Find Nearest” then “Restaurant,” “Fuel,” “Transit,” “Lodging,” “Shopping,” “Bank,” “Entertainment,” “Recreation,” “Attractions,” “Community,” “Auto Services,” “Hospitals,” “Parking,” “Airport,” “Police Stations,” “Fire Stations,” or “Auto Dealers.
178 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Power Seat Switches 1 — Seat Control 2 — Seatback Control — (If Equipped) • Adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death. • Seats should be adjusted before fastening the seat belts and while the vehicle is parked. Serious injury or death could result from a poorly adjusted seat belt.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 179 CAUTION! Do not place any article under a power seat or impede its ability to move as it may cause damage to the seat controls. Seat travel may become limited if movement is stopped by an obstruction in the seat’s path. Adjusting The Seat Forward Or Rearward Tilting The Seat Up Or Down The angle of the seat cushion can be adjusted in four directions.
180 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! CAUTION! • Adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death. • Seats should be adjusted before fastening the seat belts and while the vehicle is parked. Serious injury or death could result from a poorly adjusted seat belt. • Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 181 The front driver and passenger heated seats are operated using the Uconnect® System. WARNING! Power Lumbar Switch Heated Seats — If Equipped On some models, the front and rear seats may be equipped with heaters in both the seat cushions and seatbacks.
182 UNDERSTANDING THE FEATURES OF YOUR VEHICLE time, the display will change from HI to LO, indicating the change. The LO-level setting will turn OFF automatiThe front heated seats control buttons are located within cally after a maximum of 45 minutes. the climate or controls screen of the touchscreen. NOTE: The engine must be running for the heated seats once to turn the High • Press the heated seat button to operate. setting On.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 183 seats are located on the rear of the center console. There When the HI-level setting is selected, the heater will are two heated seat switches that allow the rear passen- provide a boosted heat level during the first four minutes gers to operate the seats independently. of operation. Then, the heat output will drop to the normal HI-level. If the HI-level setting is selected, the You can choose from HI, LO or OFF heat settings.
184 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The front ventilated seats control buttons are located This feature can be programmed through the Uconnect® within the climate or controls screen of the touchscreen. system. Refer to “Uconnect® Settings” in “Understanding Your Instrument Panel” for further information. once to choose • Press the ventilated seat button HIGH. Head Restraints • Press the ventilated seat button choose LOW. • Press the ventilated seat button turn the ventilated seat OFF.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 185 Active Head Restraints — Front Seats The front driver and passenger seats are equipped with Active Head Restraints (AHR). In the event of a rear impact the AHRs will automatically extend forward minimizing the gap between the back of the occupants head and the AHR. The AHRs will automatically return to their normal position following a rear impact. If the AHRs do not return to their normal position see your authorized dealer immediately.
186 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Do not place items over the top of the Active Head Restraint, such as coats, seat covers or portable DVD players. These items may interfere with the operation of the Active Head Restraint in the event of a collision and could result in serious injury or death. Rear Head Restraints The center head restraint has two adjustable positions, up or down. When the center seat is being occupied the head restraint should be in the raised position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 187 NOTE: These loops can be tucked away when not in use. 3 Folded Rear Seatback Rear Seatback Loop After releasing the seatback, it can be folded forward. When the seatback is folded to the upright position, make sure it is latched by strongly pulling on the top of the seatback above the seat strap.
188 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! • Be certain that the seatback is securely locked into position. If the seatback is not securely locked into position, the seat will not provide the proper stability for child seats and/or passengers. An improperly latched seat could cause serious injury. • The cargo area in the rear of the vehicle (with the rear seatbacks in the locked-up or folded down position) should not be used as a play area by children when the vehicle is in motion.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 189 equipped], power tilt and telescopic steering column [if equipped], and radio station presets). 3. Press and release the S (Set) button on the memory switch. 4. Within five seconds, memory buttons (1) Information Center memory position has Memory Seat Switch Programming The Memory Feature To create a new memory profile, perform the following: press and release either of the or (2). The Electronic Vehicle (EVIC) will display which been set.
190 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Before programming your RKE transmitters you 4. Press and release the LOCK button on the RKE must select the “Memory To FOB” feature through the transmitter within 10 seconds. Uconnect® system screen. Refer to “Uconnect® Settings” NOTE: Your RKE transmitters can be unlinked to your in “Understanding Your Instrument Panel” for further memory settings by following steps 1-4 above and pressinformation.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 191 To recall the memory setting for driver two, press The distance the driver seat moves depends on where MEMORY button number (2) on the driver’s door or the you have the driver seat positioned when you cycle the UNLOCK button on the RKE transmitter linked to vehicles ignition to the OFF position. memory position 2. • When you cycle the vehicles ignition to the OFF A recall can be cancelled by pressing any of the position, the driver seat will move about 2.
192 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The Easy Entry/Exit feature is not enabled when the vehicle is delivered from the factory. The Easy Entry/Exit feature is enabled (or later disabled) through the programmable features in the Uconnect® system. Refer to “Uconnect® Settings/Customer Programmable Features” in “Understanding Your Instrument Panel” for further information. TO OPEN AND CLOSE THE HOOD Two latches must be released to open the hood. 1.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 193 CAUTION! To prevent possible damage, do not slam the hood to close it. Lower the hood until it is open approximately 6 in (15 cm), and then drop it. This should secure both latches. Never drive your vehicle unless the hood is fully closed, with both latches engaged. WARNING! Hood Safety Latch Use the hood prop rod (if equipped) to secure the hood in the open position. Be sure the hood is fully latched before driving your vehicle.
194 UNDERSTANDING THE FEATURES OF YOUR VEHICLE LIGHTS Headlight Switch The headlight switch is located on the left side of the instrument panel. This switch controls the operation of the headlights, parking lights, instrument panel lights, instrument panel light dimming, interior lights and fog lights. Headlight Switch Rotate the headlight switch clockwise to the first detent for parking light and instrument panel light operation.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 195 Automatic Headlights — If Equipped This system automatically turns the headlights on or off according to ambient light levels. To turn the system on, rotate the headlight switch counterclockwise to the AUTO position. When the system is on, the headlight time delay feature is also on. This means the headlights will stay on for up to 90 seconds after you place the ignition into the OFF position.
196 UNDERSTANDING THE FEATURES OF YOUR VEHICLE If you turn the headlights or parking lights on, or place Automatic High Beam Headlamp Control — If the ignition in ACC or RUN, the system will cancel the Equipped delay. The Automatic High Beam Headlamp Control system If you turn the headlights off before the ignition, they will provides increased forward lighting at night by automating high beam control through the use of a digital camera turn off in the normal manner. mounted on the inside rearview mirror.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 197 • Broken, muddy, or obstructed headlights and taillights To Deactivate of vehicles in the field of view will cause headlights to 1. Pull the multifunction lever toward you (or rearward remain on longer (closer to the vehicle). Also, dirt, film, in car) to manually deactivate the system (normal and other obstructions on the windshield or camera operation of low beams). lens will cause the system to function improperly. 2.
198 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The Adaptive Headlight System is active only when NOTE: If allowed by law in the country in which the vehicle was purchased the Daytime Running Lights can the vehicle is moving forward. be turned on and off using the Uconnect® System, refer The Adaptive Headlight System can be turned On or Off to “Uconnect® Settings” in “Understanding Your Instruusing the Uconnect® System, refer to “Uconnect® Setment Panel” for further information.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 199 Rear Fog Lights — If Equipped The rear fog light switch is built into the headlight switch. To activate the rear fog lights, turn the headlamp switch to the park lamp or headlamp position. Press the headlight switch once for front fog lights, press the switch a second time for front and rear fog lights. Pressing the switch a third time will deactivate the rear fog lights, and a fourth time will deactivate the front fog lights.
200 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Multifunction Lever Turn Signals The multifunction lever controls the operation of the turn Move the multifunction lever up or down and the arrows signals, headlight beam selection and passing lights. The on each side of the instrument cluster flash to show multifunction lever is located on the left side of the proper operation of the front and rear turn signal lights. steering column.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 201 Lane Change Assist Front Map/Reading Lights — If Equipped Tap the lever up or down once, without moving beyond The front map/reading lights are mounted in the overthe detent, and the turn signal (right or left) will flash head console. three times then automatically turn off. High/Low Beam Switch 3 Push the multifunction lever away from you to switch the headlights to high beam.
202 UNDERSTANDING THE FEATURES OF YOUR VEHICLE second time. The lights will also turn on when the Courtesy Lights UNLOCK button on the Remote Keyless Entry (RKE) is The courtesy lights can be turned on by pressing the top pressed. corner of the lens. To turn the lights off, press the lens a second time.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 203 Ambient Light — If Equipped Interior Lights The overhead console is equipped with an ambient light The interior lights come on when a door is opened. feature. This light casts illumination for improved visibilTo protect the battery, the interior lights will turn off ity of the floor and center console area. automatically 10 minutes after the ignition is moved to the LOCK position.
204 UNDERSTANDING THE FEATURES OF YOUR VEHICLE With the parking lights or headlights on, rotating the left The dimmer control is part of the headlight switch and is dimmer control upward will increase the brightness of the instrument panel lights and lighted cupholders (if located on the left side of the instrument panel. equipped).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 205 Ambient Light Control Dome Light Position Rotate the right dimmer control upward or downward to Rotate the left dimmer control completely upward to the increase or decrease the brightness of the door handle second detent to turn on the interior lights. The interior lights and ambient light located in the overhead console. lights will remain on when the dimmer control is in this position.
206 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WINDSHIELD WIPERS AND WASHERS Intermittent Wiper System The multifunction lever operates the windshield wipers and washer when the ignition is placed in the ON/RUN or ACC position. The multifunction lever is located on the left side of the steering column. Use the intermittent wiper when weather conditions make a single wiping cycle with a variable pause between cycles desirable.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 207 CAUTION! • Turn the windshield wipers off when driving through an automatic car wash. Damage to the windshield wipers may result if the wiper control is left in any position other than off. • In cold weather, always turn off the wiper switch and allow the wipers to return to the “Park” position before turning off the engine.
208 UNDERSTANDING THE FEATURES OF YOUR VEHICLE two wipe cycles after releasing the lever and then resume if the headlight switch is placed in the AUTO position. In addition, the headlights will turn off when the wipers are the intermittent interval previously selected. turned off if they were turned on by this feature. If you activate the washer while the windshield wiper is turned off, the wipers will operate for three wipe cycles NOTE: The Headlights On with Wipers feature can be and then turn off.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 209 sensitive, and wiper delay position 4 is the most sensitive. Setting 3 should be used for normal rain conditions. Settings 1 and 2 can be used if the driver desires less wiper sensitivity. Setting 4 can be used if the driver desires more sensitivity. The rain sense wipers will automatically change between an intermittent wipe, slow wipe and a fast wipe depending on the amount of moisture that is sensed on the windshield.
210 UNDERSTANDING THE FEATURES OF YOUR VEHICLE position, the automatic transmission shift lever is in the NEUTRAL position and the vehicle speed is less than 5 mph (8 km/h), unless the wiper control on the multifunction lever is moved or the shift lever is moved out of the NEUTRAL position. TILT/TELESCOPING STEERING COLUMN This feature allows you to tilt the steering column upward or downward. It also allows you to lengthen or shorten the steering column.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 211 To unlock the steering column, pull the lever downward. To tilt the steering column, move the steering wheel upward or downward as desired. To lengthen or shorten the steering column, pull the steering wheel outward or push it inward as desired. To lock the steering column in position, push the lever upward until fully engaged. WARNING! Do not adjust the steering column while driving.
212 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: For vehicles equipped with Driver Memory Seat, you can use your Remote Keyless Entry (RKE) transmitter or the memory switch on the driver’s door trim panel to return the tilt/telescopic steering column to preprogrammed positions. Refer to “Driver Memory Seat” in this section. WARNING! Power Tilt/Telescoping Steering Switch To tilt the steering column, move the switch up or down as desired.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 213 HEATED STEERING WHEEL — IF EQUIPPED Vehicles Equipped With Remote Start The steering wheel contains a heating element that helps warm your hands in cold weather. The heated steering wheel has only one temperature setting. Once the heated steering wheel has been turned on it will operate for up to 80 minutes before automatically shutting off. The heated steering wheel can shut off early or may not turn on when the steering wheel is already warm.
214 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! (Continued) • Do not place anything on the steering wheel that insulates against heat, such as a blanket or steering wheel covers of any type and material. This may cause the steering wheel heater to overheat. ADJUSTABLE PEDALS — IF EQUIPPED The adjustable pedals system is designed to allow a greater range of driver comfort for steering wheel tilt and seat position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 215 • The pedals cannot be adjusted when the vehicle is in REVERSE or when the Electronic Speed Control System is on. The following messages will be displayed on vehicles equipped with the Electronic Vehicle Information System (EVIC) if the pedals are attempted to be adjusted when the system is locked out (“Adjustable Pedal Disabled — Cruise Control Engaged” or “Adjustable Pedal Disabled — Vehicle In Reverse”).
216 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ELECTRONIC SPEED CONTROL — IF EQUIPPED When engaged, the Electronic Speed Control takes over accelerator operations at speeds greater than 25 mph (40 km/h). The Electronic Speed Control buttons are located on the right side of the steering wheel.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 217 NOTE: In order to ensure proper operation, the Electronic Speed Control System has been designed to shut down if multiple Speed Control functions are operated at the same time. If this occurs, the Electronic Speed Control System can be reactivated by pushing the Electronic Speed Control ON/OFF button and resetting the desired vehicle set speed. WARNING! Leaving the Electronic Speed Control system on when not in use is dangerous.
218 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Deactivate The speed increment shown is dependant on the speed of U.S. (mph) or Metric (km/h) units: A soft tap on the brake pedal, pushing the CANCEL button, or normal brake pressure while slowing the U.S. Speed (mph) vehicle will deactivate the Electronic Speed Control with• Pressing the RES (+) button once will result in a 1 mph out erasing the set speed memory. increase in set speed.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 219 • If the button is continually pressed, the set speed will continue to decrease until the button is released, then When the Electronic Speed Control is set, you can dethe new set speed will be established. crease speed by pushing the SET (-) button. The speed decrement shown is dependant on the speed To Accelerate For Passing To Decrease Speed of U.S. (mph) or Metric (km/h) units: U.S. Speed (mph) Press the accelerator as you would normally.
220 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Electronic Speed Control can be dangerous where the system cannot maintain a constant speed. Your vehicle could go too fast for the conditions, and you could lose control and have an accident. Do not use Electronic Speed Control in heavy traffic or on roads that are winding, icy, snow-covered or slippery. ACC will allow you to keep cruise control engaged in light to moderate traffic conditions without the constant need to reset your cruise control.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 221 WARNING! WARNING! (Continued) • Adaptive Cruise Control (ACC) is a convenience system. It is not a substitute for active driving involvement. It is always the driver’s responsibility to be attentive of road, traffic, and weather conditions, vehicle speed, distance to the vehicle ahead; and, most importantly, brake operation to ensure safe operation of the vehicle under all road conditions.
222 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! (Continued) • When entering a turn lane or highway off ramp; when driving on roads that are winding, icy, snowcovered, slippery, or have steep uphill or downhill slopes. • When towing a trailer up or down steep slopes. • When circumstances do not allow safe driving at a constant speed. The Cruise Control system has two control modes: • Adaptive Cruise Control mode for maintaining an appropriate distance between vehicles.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 223 NOTE: Any chassis/suspension modifications to the vehicle will effect the performance of the Adaptive Cruise Control. Activating Adaptive Cruise Control (ACC) You can only activate ACC if the vehicle speed is above 20 mph (32 km/h). When the system is turned on and in the READY state, the Electronic Vehicle Information Center (EVIC) displays “Adaptive Cruise Ready.
224 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • When the automatic transmission is in PARK, REVERSE or NEUTRAL. • When pushing the RES + button without a previously set speed in memory. To Activate Push and release the ON/OFF button. The ACC menu in the EVIC displays “Adaptive Cruise Control Ready.” Adaptive Cruise Control (ACC) Ready To turn the system OFF, push and release the ON/OFF button again. At this time, the system will turn off and the EVIC will display “Adaptive Cruise Control Off.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 225 WARNING! Leaving the Adaptive Cruise Control (ACC) system on when not in use is dangerous. You could accidentally set the system or cause it to go faster than you want. You could lose control and have a collision. Always leave the system off when you are not using it. To Set A Desired ACC Speed Adaptive Cruise Control (ACC) OFF When the vehicle reaches the speed desired, push the SET - button and release. The EVIC will display the set speed.
226 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The system will not be controlling the distance between your vehicle and the vehicle ahead. The vehicle speed will only be determined by the position of the accelerator pedal. ACC Set Remove your foot from the accelerator pedal. If you do not, the vehicle may continue to accelerate beyond the set speed. If this occurs: • The message “DRIVER OVERRIDE” will display in the EVIC.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 227 To Cancel The system will disable ACC without erasing the memory if: • You softly tap the brake pedal. 3 • You depress the brake pedal. • You press the CANCEL switch. • The vehicle speed goes below 15 mph (25 km/h). • An Anti-Lock Brake System (ABS) event occurs. • The transmission is shifted into NEUTRAL. Adaptive Cruise Control (ACC) Cancelled • The Electronic Stability Control/Traction Control Sys- To Turn Off tem (ESC/TCS) activates.
228 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Resume Speed To Vary The Speed Setting Press the RES + button and release. Then remove your To Increase Speed foot from the accelerator pedal. The EVIC will display the While ACC is set, you can increase the set speed by last set speed. pressing the RES + button. NOTE: You can resume ACC from a minimum of The speed increment shown is dependant on the speed of 20 mph (32 km/h). U.S.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 229 • If the button is continually pressed, the set speed will continue to decrease in 5 mph increments until the • RES + button once will result in a 2 km/h increase in button is released. The decrease in set speed is reset speed. Each subsequent tap of the button results in flected in the EVIC display. an increase of 2 km/h.
230 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The ACC system can only apply a maximum of 25% of the vehicle’s braking capability and will not bring the vehicle to a complete stop. • The ACC system maintains set speed when driving up hill and down hill. However, a slight speed change on moderate hills is normal. In addition, downshifting may occur while climbing uphill or descending downhill. This is normal operation and necessary to maintain set speed.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 231 3 Distance Set 2 (medium) Distance Set 1 (short) To change the distance setting, press the Distance button and release. Each time the button is pressed, the distance setting adjusts between 3 (long), 2 (medium), and 1 (short).
232 UNDERSTANDING THE FEATURES OF YOUR VEHICLE If there is no vehicle ahead, the vehicle will maintain the set speed. If a slower moving vehicle is detected in the same lane, the EVIC displays the “Sensed Vehicle Indicator” icon, and the system adjusts vehicle speed automatically to maintain the distance setting, regardless of the set speed.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 233 3 Brake Alert 3 Brake Alert 2
234 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Overtake Aid When driving with ACC engaged and following a target vehicle, the system will provide an additional acceleration to assist in passing vehicles in front. This additional acceleration is triggered when the driver utilizes the left turn signal. In locations with left hand drive traffic, Overtake Aid is active only when passing on the left hand side of the Target vehicles.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 235 Adaptive Cruise Control (ACC) Menu Adaptive Cruise Control Ready The EVIC displays the current ACC system settings. The • When ACC is activated but the vehicle speed setting EVIC is located in the upper part of the instrument has not been selected, the display will read “Adaptive cluster between the speedometer and the tachometer. The Cruise Control Ready.” information it displays depends on ACC system status.
236 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Driver Override The “Clean Radar Sensor In Front Of Vehicle” message can sometimes be displayed while driving in highly • System Off reflective areas (i.e. tunnels with reflective tiles, or ice and snow). The ACC system will recover after the vehicle has • ACC Proximity Warning left these areas.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 237 To keep the ACC System operating properly, it is impor- When the condition that deactivated the system is no tant to note the following maintenance items: longer present, the system will return to the “Adaptive Cruise Control Off” state and will resume function by • Always keep the sensor clean. Carefully wipe the simply reactivating it. sensor lens with a soft cloth. Be cautious not to damage the sensor lens.
238 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Precautions While Driving With ACC In certain driving situations, ACC may have detection issues. In these cases, ACC may brake late or unexpectedly. The driver needs to stay alert and may need to intervene. Adding A Trailer Hitch The weight of a trailer/hitch may affect the performance of ACC.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 239 3 Offset Driving Condition Example Turns And Bends In turns or bends, ACC may detect a vehicle ahead too late or too early. This may cause your vehicle to brake late or unexpectedly. Give extra attention in curves and be ready to apply the brakes if necessary. Be sure to select an appropriate speed while driving in curves. Turn Or Bend Example ACC may occasionally provide braking and/or a driver alert that you consider unnecessary.
240 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Using ACC On Hills Lane Changing When driving on hills, ACC may not detect a vehicle in your lane. Depending on the speed, vehicle load, traffic conditions, and the steepness of the hills, ACC performance may be limited. ACC may not detect a vehicle until it is completely in the lane in which you are traveling.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 241 Narrow Vehicles Some narrow vehicles traveling near the outer edges of the lane or edging into the lane are not detected until they have moved fully into the lane. There may not be sufficient distance to the vehicle ahead.
242 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Stationary Objects And Vehicles ACC does not react to stationary objects and stationary vehicles. For example, ACC will not react in situations where the vehicle you are following exits your lane and the vehicle ahead is stopped in your lane. Always be attentive and ready to apply the brakes if necessary. General Information FCC Requirements For Vehicular Radar Systems Classification Specifications: 47 C.F.R. Part 15 47 C.F.R Part 15.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 243 to the change of state from Adaptive Cruise Control to normal Cruise Control. “Cruise Ready” will be displayed if the system was in ACC READY or ACC SET position. “Cruise Off” will be displayed if the system was in the ACC OFF position. To switch back to Adaptive Cruise Control mode, press the MODE button a second time. WARNING! In the normal Cruise Control mode, the system will not react to vehicles ahead.
244 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • If the button is continually pressed, the set speed will The speed decrement shown is dependant on the speed continue to increase until the button is released, then of U.S. (mph) or Metric (km/h) units: the new set speed will be established. U.S. Speed (mph) Metric Speed (km/h) • Pressing the SET - button once will result in a 1 mph • Pressing the RES + button once will result in a 2 km/h decrease in set speed.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 245 To Cancel • You turn off the ignition. The system will disable normal Cruise Control without • You switch off ESC. erasing the memory if: If the Cruise Control system is turned off and reactivated, • You softly tap or depress the brake pedal. the system will return to the last driver setting (ACC or Normal Cruise Control). • You press the CANCEL button.
246 UNDERSTANDING THE FEATURES OF YOUR VEHICLE system determines a collision with the vehicle in front of Changing FCW Status you is no longer probable, the warning message will be The FCW feature can be set to far, set to near or turned off deactivated. using the Uconnect® System, refer to “Uconnect® SetNOTE: The minimum speed for FCW activation is tings” in “Understanding Your Instrument Panel” for further information. The FCW Status Off, Near or Far will 10 mph (16 km/h).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 247 Changing the FCW status to “Off” prevents the system FCW Unavailable Warning from warning you of a possible collision with the vehicle If the system turns off, and the EVIC displays “ACC/ in front of you. FCW Unavailable, Service Required”, there may be a temporary malfunction that limits FCW functionality.
248 UNDERSTANDING THE FEATURES OF YOUR VEHICLE PARKSENSE® FRONT AND REAR PARK ASSIST — IF EQUIPPED The ParkSense® Park Assist system provides visual and audible indications of the distance between the rear and/or front fascia and a detected obstacle when backing up or moving forward, e.g. during a parking maneuver. Refer to ParkSense® System Usage Precautions for limitations of this system and recommendations.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 249 ParkSense® Sensors ParkSense® Warning Display The four ParkSense® sensors, located in the rear fascia/ bumper, monitor the area behind the vehicle that is within the sensors’ field of view. The sensors can detect obstacles from approximately 12 in (30 cm) up to 59 in (150 cm) from the rear fascia/bumper in the horizontal direction, depending on the location, type and orientation of the obstacle.
250 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ParkSense® Display The warning display will turn ON indicating the system status when the vehicle is in REVERSE or when the vehicle is in DRIVE and an obstacle has been detected.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 251 3 Park Assist System OFF The system will indicate a detected obstacle by showing three solid arcs and will produce a one-half second tone. As the vehicle moves closer to the obstacle the EVIC display will show fewer arcs and the sound tone will change from slow, to fast, to continuous.
252 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Fast Tone Continuous Tone The vehicle is close to the obstacle when the EVIC display shows one flashing arc and sounds a continuous tone.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 253 Rear Distance (in/cm) Front Distance (in/cm) Audible Alert (Chime) Greater than 59 in (150 cm) Greater than 47 in (120 cm) None Arc None WARNING ALERTS 59-39 in 39-25 in (150-100 cm) (100-65 cm) 47-39 in 39-25 in (120-100 cm) (100-65 cm) Single 1/2 secSlow (for rear ond tone (for only) rear only) 3 Solid 3 Slow Flashing (Continuous) 25-12 in (65-30 cm) 25-12 in (65-30 cm) Fast Less than 12 in (30 cm) Less than 12 in (30 cm) Continuous 2 Slow Flashing 1
254 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Only, or Sound and Display. Refer to “Uconnect® Settings” in “Understanding Your Instrument Panel” for ParkSense® will turn off the Front Park Assist audible further information. alert (chime) after approximately three seconds when an obstacle has been detected, the vehicle is stationary, and When the ParkSense® soft-key is pressed to disable the system, the EVIC will display the “PARK ASSIST SYSbrake pedal is applied.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 255 or the “SERVICE PARK ASSIST SYSTEM” message for five seconds. Refer to “Electronic Vehicle Information Center (EVIC)” in “Understanding Your Instrument Panel” for further information. When the shift lever is moved to REVERSE and the system has detected a fault condition, the EVIC will display the ⬙CLEAN PARK ASSIST⬙, ⬙SERVICE PARK ASSIST⬙, or ⬙SERVICE PARK ASSIST SYSTEM⬙ message for as long as the vehicle is in REVERSE.
256 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • ParkSense®, when on, will MUTE the radio when it is sounding a tone. • Clean the ParkSense® sensors regularly, taking care not to scratch or damage them. The sensors must not be covered with ice, snow, slush, mud, dirt or debris. Failure to do so can result in the system not working properly.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 257 WARNING! WARNING! (Continued) • Drivers must be careful when backing up even when using the ParkSense® Park Assist system. Always check carefully behind your vehicle, look behind you, and be sure to check for pedestrians, animals, other vehicles, obstructions, and blind spots before backing up. You are responsible for safety and must continue to pay attention to your surroundings. Failure to do so can result in serious injury or death.
258 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The ParkView® Rear Back Up Camera has programmable modes of operation that may be selected through the Uconnect® System. Refer to “Uconnect® Your vehicle may be equipped with the ParkView® Rear Back Up Camera that allows you to see an on-screen Settings” in “Understanding Your Instrument Panel” for image of the rear surroundings of your vehicle whenever further information. the shift lever is put into REVERSE.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 259 WARNING! CAUTION! (Continued) Drivers must be careful when backing up even when using the ParkView® Rear Back Up Camera. Always check carefully behind your vehicle, and be sure to check for pedestrians, animals, other vehicles, obstructions, or blind spots before backing up. You are responsible for the safety of your surroundings and must continue to pay attention while backing up. Failure to do so can result in serious injury or death.
260 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Front Map/Reading Lights — If Equipped Lights are mounted in the overhead console. Each light can be turned on by pressing the switch on either side of the console. These buttons are backlit for night time visibility.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 261 To turn the lights off, press the switch a second time. The lights also turn on when a door is opened. The lights will also turn on when the UNLOCK button on the RKE is pressed. Courtesy Lights The courtesy lights can be turned on by pressing the top corner of the lens. To turn the lights off, press the lens a second time.
262 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Sunglasses Bin Door GARAGE DOOR OPENER — IF EQUIPPED At the front of the console a compartment is provided for the storage of a pair of sunglasses. The storage compartment access is a “push/push” design. Push the chrome pad on the door to open. Push the chrome pad on the door to close. HomeLink® replaces up to three hand-held transmitters that operate devices such as garage door openers, motorized gates, lighting or home security systems.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 263 3 HomeLink® Buttons/Overhead Consoles HomeLink® Buttons/Sunvisor/Headliner NOTE: HomeLink® is disabled when the Vehicle Security Alarm is active.
264 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Before You Begin Programming HomeLink® NOTE: Be sure that your vehicle is parked outside of the garage • Erasing all channels should only be performed when before you begin programming. programming HomeLink® for the first time. Do not erase channels when programming additional buttons.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 265 2. Place the hand-held transmitter 1 to 3 in (3 to 8 cm) away from the HomeLink® button you wish to program while keeping the HomeLink® indicator light in view. 3. Simultaneously press and hold both the HomeLink® button you want to program and the hand-held transmitter button. Training The Garage Door Opener 1 — Door Opener 2 — Training Button 1. Cycle the ignition to the ON/RUN position. 4. Continue to hold both buttons and observe the indicator light.
266 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Firmly press and release the “LEARN” or “TRAIN- Reprogramming A Single HomeLink® Button ING” button. On some garage door openers/devices To reprogram a channel that has been previously trained, there may be a light that blinks when the garage door follow these steps: opener/device is in the LEARN/TRAIN mode. 1. Cycle the ignition to the ON/RUN position. NOTE: You have 30 seconds in which to initiate the next 2.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 267 2. Place the hand-held transmitter 1 to 3 in (3 to 8 cm) away from the HomeLink® button you wish to program while keeping the HomeLink® indicator light in view. • To program the two remaining HomeLink® buttons, repeat each step for each remaining button. DO NOT erase the channels. Reprogramming A Single HomeLink® Button 3.
268 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Place the hand-held transmitter 1 to 3 in (3 to 8 cm) away from the HomeLink® button you wish to proFor programming transmitters in Canada/United States gram while keeping the HomeLink® indicator light in that require the transmitter signals to “time-out” after view. several seconds of transmission. Canadian radio frequency laws require transmitter sig- 3.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 269 3. Without releasing the button proceed with “Canadian/Gate Operator Programming” step 2 and follow all remaining steps. 5. Press and hold the programmed HomeLink® button and observe the indicator light. • If the indicator light stays on constantly, programming is complete and the garage door/device should activate when the HomeLink® button is pressed. • To program the two remaining HomeLink® buttons, repeat each step for each remaining button.
270 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The HomeLink® Universal Transceiver is disabled when the Vehicle Security Alarm is active. WARNING! If you are having trouble programming HomeLink®, here are some of the most common solutions: Vehicle exhaust contains carbon monoxide, a dangerous gas. Do not run your vehicle in the garage while programming the transceiver. Exhaust gas can cause serious injury or death. • Replace the battery in the original hand-held transmitter.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 271 WARNING! (Continued) use a garage door opener without these safety features. Call toll-free 1–800–355–3515 or, on the Internet at www.HomeLink.com for safety information or assistance. General Information This device complies with FCC rules Part 15 and Industry Canada RSS-210. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2.
272 UNDERSTANDING THE FEATURES OF YOUR VEHICLE POWER SUNROOF — IF EQUIPPED The power sunroof switch is located between the sun visors on the overhead console. Power Sunroof Switch WARNING! • Never leave children unattended in a vehicle, or with access to an unlocked vehicle. Never leave the Key Fob in or near the vehicle, or in a location accessible to children. Do not leave the ignition of a vehicle equipped with Keyless Enter-N-Go™ in the ACC or ON/RUN mode.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 273 WARNING! (Continued) • Do not allow small children to operate the sunroof. Never allow your fingers, other body parts, or any object, to project through the sunroof opening. Injury may result. movement. The sunroof and sunshade will remain in a partially opened condition until the switch is pushed and held rearward again.
274 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Pinch Protect Feature Sunshade Operation This feature will detect an obstruction in the opening of the sunroof during Express Close operation. If an obstruction in the path of the sunroof is detected, the sunroof will automatically retract. Remove the obstruction if this occurs. Next, press the switch forward and release to Express Close. The sunshade can be opened manually. However, the sunshade will open automatically as the sunroof opens.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 275 Sunroof Maintenance Use only a nonabrasive cleaner and a soft cloth to clean the glass panel. The power shade switch is located to the right between the sun visors on the overhead console. Ignition OFF Operation 3 The power sunroof switch will remain active for up to approximately ten minutes after the ignition switch is turned to the LOCK position. Opening either front door will cancel this feature.
276 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! WARNING! (Continued) • Never leave children unattended in a vehicle, or with access to an unlocked vehicle. Never leave the Key Fob in or near the vehicle, or in a location accessible to children. Do not leave the ignition of a vehicle equipped with Keyless Enter-N-Go™ in the ACC or ON/RUN mode. Occupants, particularly unattended children, can become entrapped by the power sunroof while operating the power sunroof switch.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 277 movement. The sunroof and sunshade will remain in a Opening Power Shade — Express partially opened condition until the switch is pushed and Press the shade switch rearward and release it within held rearward again. one-half second and the shade will automatically open to the halfway position and stop automatically.
278 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Closing Power Shade — Express Venting Sunroof — Express Press the switch forward and release it within one-half second and the shade will close automatically from any position. If the sunroof is completely closed the shade will close fully and stop automatically. This is called “Express Close”. During Express Close operation, any movement of the switch will stop the shade.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 279 NOTE: If three consecutive sunroof close attempts result Ignition OFF Operation in Pinch Protect reversals, the fourth close attempt will be The power sunroof switch will remain active for up to a Manual Close movement with Pinch Protect disabled. approximately ten minutes after the ignition switch is turned to the LOCK position. Opening either front door Wind Buffeting will cancel this feature.
280 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: To ensure proper operation, a MOPAR® knob and element must be used. CAUTION! • Do not exceed the maximum power of 160 Watts (13 Amps) at 12 Volts. If the 160 Watts (13 Amps) power rating is exceeded, the fuse protecting the system will need to be replaced. • Power outlets are designed for accessory plugs only. Do not insert any other object in the power outlets as this will damage the outlet and blow the fuse.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 281 The center console outlet is powered directly from the has power available only when the ignition is placed in battery (power available at all times). Items plugged into the ACC or RUN position. this outlet may discharge the battery and/or prevent the engine from starting. 3 Rear Center Console Power Outlet Center Console Power Outlet There is also a 12 Volt power outlet located on the back of the center console for rear passengers.
282 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! To avoid serious injury or death: • Only devices designed for use in this type of outlet should be inserted into any 12 Volt outlet. • Do not touch with wet hands. • Close the lid when not in use and while driving the vehicle. • If this outlet is mishandled, it may cause an electric shock and failure.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 283 CAUTION! CAUTION! (Continued) • Many accessories that can be plugged in draw power from the vehicle’s battery even when not in use (i.e., cellular phones, etc.). Eventually, if plugged in long enough, the vehicle’s battery will discharge sufficiently to degrade battery life and/or prevent the engine from starting. • Accessories that draw higher power (i.e., coolers, vacuum cleaners, lights, etc.) will degrade the battery even more quickly.
284 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Retractable Cover Front Cupholders
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 285 Heated And Cooled Cupholders — If Equipped Your vehicle may be equipped with heated and cooled cupholders. The cupholders are designed to help keep warm beverages warm and cold beverages cool. Press the “Hot” symbol once to activate the cupholder; press the symbol a second time to turn off the cupholder. WARNING! When using the cupholder in the “Hot” position, avoid contact with the heated portion of the cupholder in order to reduce the possibility of burns.
286 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rear Seat Cupholders The rear seat cupholders are located in the center armrest between the rear seats. The cupholders are positioned forward in the armrest and side-by-side to provide convenient access to beverage cans or bottles while maintaining a resting place for the rear occupant’s elbows.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 287 Lighted Cupholders — If Equipped STORAGE On some vehicles the rear cupholders are equipped with Glove Compartment a light ring that illuminates the cupholders for the rear The glove compartment is located on the passenger side passengers. The light ring is controlled by the Dimmer of the instrument panel. Control. Refer to “Lights” in “Understanding The Features Of Your Vehicle” for further information.
288 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Two separate storage compartments are also located underneath the center console armrest. Opened Glove Compartment Console Features Center Console There is a cubby bin located forward of the shift lever. The cubby bin is covered with a push-push actuated Inside the center console armrest, there is a removable door.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 289 small items like an ipod or phone. Below the upper tray, the lower storage compartment is made for larger items, like CDs and tissue boxes. In addition, the 12 volt power outlet, USB and Aux jack are located here. WARNING! Do not operate this vehicle with a console compartment lid in the open position. Driving with the console compartment lid open may result in injury in a collision. Door Storage The door panels contain storage areas.
290 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rear Seat Armrest Storage — If Equipped For rear passengers there is a storage bin located in the armrest. Lift upward on the latch to open the storage compartment.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 291 Cargo Area — Vehicles Equipped With 60/40 Split-Folding Rear Seat The 60/40 split-folding rear seat provides cargo-carrying versatility. The seatbacks fold down easily by pulling nylon tabs between the seatbacks and the bolsters. When the seats are folded down, they provide a continuous, nearly-flat extension of the load floor.
292 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! The weight and position of cargo and passengers can change the vehicle center of gravity and vehicle handling. To avoid loss of control resulting in personal injury, follow these guidelines for loading your vehicle: • Always place cargo evenly on the cargo floor. Put heavier objects as low and as far forward as possible. • Place as much cargo as possible in front of the rear axle.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 293 Cargo Net The rear cargo area is equipped with a cargo net. 3 Grocery Bag Hooks CAUTION! Do not exceed the maximum weight limit 50 lbs (22 kg) of the grocery bag hook. Damage may occur to hook and mounting surface.
294 UNDERSTANDING THE FEATURES OF YOUR VEHICLE REAR WINDOW FEATURES Rear Window Defroster The rear window defroster button is located on the climate control. Press this button to turn on the rear window defroster and the heated outside mirrors (if equipped). An indicator in the button will illuminate when the rear window defroster is on. The rear window defroster automatically turns off after approximately 10 minutes. For an additional five minutes of operation, press the button a second time.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 295 NOTE: The rear sunshade control switch can be locked out along with the rear passenger window controls from Your vehicle may be equipped with a power sunshade the driver switch window lockout switch. that will reduce the amount of sunlight that will shine through the rear windshield. Power Sunshade — If Equipped The power sunshade can be operated using the Uconnect® System.
296 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Power Sunshade Soft-Key The power sunshade can also be operated by passengers in the rears seats. The power sunshade switch is located on the back of the center console between the heated seat switches. Press the switch once to raise the sunshade. Press the switch a second time to lower the sunshade.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 297 LOAD LEVELING SYSTEM — IF EQUIPPED The automatic load leveling system will provide a levelriding vehicle under most passenger and cargo loading conditions. A hydraulic pump contained within the shock absorbers raises the rear of the vehicle to the correct height. It takes approximately 1 mile (1.6 km) of driving for the leveling to complete depending on road surface conditions.
UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS 䡵 INSTRUMENT PANEL FEATURES . . . . . . . . . .301 ▫ EVIC Red Telltales . . . . . . . . . . . . . . . . . . . . .319 䡵 INSTRUMENT CLUSTER . . . . . . . . . . . . . . . . .302 ▫ Gear Shift Indicator (GSI) — If Equipped . . . . .322 䡵 INSTRUMENT CLUSTER — PREMIUM . . . . . . .303 ▫ Oil Change Due . . . . . . . . . . . . . . . . . . . . . .324 䡵 INSTRUMENT CLUSTER DESCRIPTIONS . . . . .304 ▫ Fuel Economy . . . . . . . . . . . . . . . . . . . . . . . .
300 UNDERSTANDING YOUR INSTRUMENT PANEL ▫ Turn Menu OFF. . . . . . . . . . . . . . . . . . . . . . .330 䡵 STEERING WHEEL AUDIO CONTROLS . . . . . .348 䡵 Uconnect® SETTINGS . . . . . . . . . . . . . . . . . . .330 ▫ Radio Operation . . . . . . . . . . . . . . . . . . . . . .349 ▫ Hard-Keys . . . . . . . . . . . . . . . . . . . . . . . . . .330 ▫ CD Player . . . . . . . . . . . . . . . . . . . . . . . . . . .349 ▫ Soft-Keys . . . . . . . . . . . . . . . . . . . . . . . . . . .
UNDERSTANDING YOUR INSTRUMENT PANEL 301 INSTRUMENT PANEL FEATURES 4 1 2 3 4 5 6 — Air Outlet — Instrument Cluster — Hazard Switch — Uconnect® System — Climate Control Hard Controls — Glove Compartment 7 — ESC Off Switch 8 — Uconnect® System Hard Controls 9 — SD Memory Card Slot 10 — Power Outlet 11 — CD/DVD Slot 12 — Storage Compartment 13 14 15 16 17 18 — Engine Start/Stop Button — Trunk Release Button — Dimmer Controls — Hood Release — Headlight Switch — Analog Clock
302 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER
UNDERSTANDING YOUR INSTRUMENT PANEL 303 INSTRUMENT CLUSTER — PREMIUM 4
304 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER DESCRIPTIONS 1. Tachometer This gauge measures engine revolutions-per-minute (RPM x 1000). 2. Park/Headlight ON Indicator — If Equipped 4. Front Fog Light Indicator — If Equipped This indicator will illuminate when the front fog lights are on. 5. High Beam Indicator This indicator shows that the high beam headThis indicator will illuminate when the park lights are on. Push the multifunction lever forlights or headlights are turned on.
UNDERSTANDING YOUR INSTRUMENT PANEL 305 The Shift Lever Indicator is self-contained within the your odometer needs to be repaired or serviced, the repair technician should leave the odometer reading EVIC display. It displays the gear position of the automatic transmission. the same as it was before the repair or service.
306 UNDERSTANDING YOUR INSTRUMENT PANEL by the vehicle manufacturer on the vehicle placard or tire inflation pressure label. (If your vehicle has tires of a different size than the size indicated on the vehicle placard or tire inflation pressure label, you should determine the proper tire inflation pressure for those tires.
UNDERSTANDING YOUR INSTRUMENT PANEL 307 replacement or alternate tires and wheels allow the TPMS monitors engine and automatic transmission control systo continue to function properly. tems. The light will illuminate when the key is in the ON/RUN position, before engine start. If the bulb does not come on when turning the key from OFF to ON/ CAUTION! RUN, have the condition checked promptly. The TPMS has been optimized for the original equipment tires and wheels.
308 UNDERSTANDING YOUR INSTRUMENT PANEL WARNING! A malfunctioning catalytic converter, as referenced above, can reach higher temperatures than in normal operating conditions. This can cause a fire if you drive slowly or park over flammable substances such as dry plants, wood, cardboard, etc. This could result in death or serious injury to the driver, occupants or others. 9. Speedometer Indicates vehicle speed. 10.
UNDERSTANDING YOUR INSTRUMENT PANEL 309 13. Anti-Lock Brake (ABS) Light This light monitors the Anti-Lock Brake System (ABS). The light will turn on when the ignition switch is turned to the ON/RUN position and may stay on for as long as four seconds. If the ABS light remains on or turns on while driving, it indicates that the Anti-Lock portion of the brake system is not functioning and that service is required.
310 UNDERSTANDING YOUR INSTRUMENT PANEL 17. Brake Warning Light The dual brake system provides a reserve braking capacity in the event of a failure to a portion of the hydraulic system. A leak in either half of the dual brake system is indicated by the Brake Warning Light, which will turn on when the brake fluid level in the master cylinder has dropped below a specified level. This light monitors various brake functions, including brake fluid level and parking brake application.
UNDERSTANDING YOUR INSTRUMENT PANEL 311 WARNING! Driving a vehicle with the red brake light on is dangerous. Part of the brake system may have failed. It will take longer to stop the vehicle. You could have a collision. Have the vehicle checked immediately. The light also will turn on when the parking brake is applied with the ignition switch in the ON/RUN position. NOTE: This light shows only that the parking brake is applied. It does not show the degree of brake application. 18.
312 UNDERSTANDING YOUR INSTRUMENT PANEL (kilometers) at speeds greater than 30 mph (48 km/h), see 19. Seat Belt Reminder Light your authorized dealer as soon as possible to have the When the ignition switch is first turned to ON/ problem diagnosed and corrected. RUN, this light will turn on for four to eight seconds as a bulb check. During the bulb check, if NOTE: the driver’s seat belt is unbuckled, a chime will sound.
UNDERSTANDING YOUR INSTRUMENT PANEL 313 CAUTION! WARNING! Driving with a hot engine cooling system could damage your vehicle. If the temperature gauge reads “H” pull over and stop the vehicle. Idle the vehicle with the air conditioner turned off until the pointer drops back into the normal range. If the pointer remains on the “H” and you hear continuous chimes, turn the engine off immediately and call an authorized dealer for service. A hot engine cooling system is dangerous.
314 UNDERSTANDING YOUR INSTRUMENT PANEL The EVIC Menu items consists of the following: • Radio Info • Fuel Economy Info • Cruise Control Info • Digital Vehicle Speed • Trip Info • Tire Pressure • Vehicle Info Electronic Vehicle Information Center (EVIC) • Stored Warning Messages • Turn Menu OFF
UNDERSTANDING YOUR INSTRUMENT PANEL 315 The system allows the driver to select information by UP Button pressing the following buttons mounted on the steering Press and release the UP button to scroll upwheel: ward through the main menu and Vehicle Info and Trip Info sub-menus (Fuel Economy, Vehicle Info, Tire PSI, Cruise, Messages, Trip Info, Vehicle Speed, and Turn Menu OFF) and sub-menus.
316 UNDERSTANDING YOUR INSTRUMENT PANEL SELECT Button Press and release the SELECT button to access the information screens or sub-menu screens of a main menu item. Press and hold the SELECT button for two seconds to reset displayed/ selected features that can be reset. 2. The main display area where the menus and pop up messages are displayed. 3. The reconfigurable telltales section. The main display area will normally display the main menu or the screens of a selected feature of the main menu.
UNDERSTANDING YOUR INSTRUMENT PANEL 317 EVIC’s compass/outside temp line. Examples of this seconds and then returns to the previous screen. Exmessage type are ⬙Right Front Turn Signal Lamp Out⬙ amples of this message type are ⬙Memory System Unavailable - Not in Park⬙ and ⬙Automatic High Beams On⬙. and ⬙Low Tire Pressure⬙.
318 UNDERSTANDING YOUR INSTRUMENT PANEL • Electronic Speed Control ON This telltale will illuminate when the electronic speed control is ON. For further information, refer to “Electronic Speed Control” in “Understanding The Features Of Your Vehicle.” • Electronic Speed Control SET • Adaptive Cruise Control (ACC) SET This telltale will illuminate when the ACC is SET. For further information, refer to “Adaptive Cruise Control (ACC)” in “Understanding The Features Of Your Vehicle.
UNDERSTANDING YOUR INSTRUMENT PANEL 319 • Low Fuel Telltale When the fuel level reaches approximately 3.0 gal (11.0 L) this light will turn on, and remain on until fuel is added. • Windshield Washer Fluid Low Indicator • SERV AWD (Service All Wheel Drive) Indicator — If Equipped This light will turn on when the All Wheel Drive feature requires service. For further information, refer to “All Wheel Drive” in “Starting And Operating.
320 UNDERSTANDING YOUR INSTRUMENT PANEL • Trunk Ajar This light will turn on to indicate that the trunk lid is ajar. • Charging System Telltale This telltale shows the status of the electrical charging system. If the telltale stays on or comes on while driving, turn off some of the vehicle’s nonessential electrical devices or increase engine speed (if at • Oil Pressure Warning Telltale idle). If the charging system telltale remains on, it means This telltale indicates low engine oil pressure.
UNDERSTANDING YOUR INSTRUMENT PANEL 321 If a problem is detected, the telltale will come on while Further overheating will cause the temperature gauge to the engine is running. Cycle the ignition key when the pass H, or 260°F, a continuous chime will occur until the vehicle has completely stopped and the shift lever is engine is allowed to cool. placed in the PARK position. The telltale should turn off.
322 UNDERSTANDING YOUR INSTRUMENT PANEL CAUTION! Continuous driving with the Transmission Temperature Warning Telltale illuminated will eventually cause severe transmission damage or transmission failure. WARNING! If the Transmission Temperature Warning Telltale is illuminated and you continue operating the vehicle, in some circumstances you could cause the fluid to boil over, come in contact with hot engine or exhaust components and cause a fire.
UNDERSTANDING YOUR INSTRUMENT PANEL 323 4 GSI Shift Up (+) Indicator GSI Shift Down (-) Indicator When the shift down indicator (-) is shown on the The GSI indicator in the EVIC remains illuminated until display, the GSI is advising the driver to engage a lower the driver changes gear, or the driving conditions return gear. to a situation where changing gear is not required to improve fuel consumption.
324 UNDERSTANDING YOUR INSTRUMENT PANEL Oil Change Due Your vehicle is equipped with an engine oil change indicator system. The ⬙Oil Change Due⬙ message will display in the EVIC for five seconds after a single chime has sounded at the start of each ignition that an oil change is due. The engine oil change indicator system is duty cycle based, which means the engine oil change interval may fluctuate dependent upon your personal driving style.
UNDERSTANDING YOUR INSTRUMENT PANEL 325 • Miles Per Gallon (MPG) or L/100km Average Fuel Economy/ECO Fuel Saver Mode — If Equipped Press the UP/DOWN buttons to cycle through all the Shows the average fuel economy since the last reset. Trip Computer functions. When the fuel economy is reset, the display will read The Trip Functions mode displays the following informa“RESET” or show dashes for two seconds.
326 UNDERSTANDING YOUR INSTRUMENT PANEL Distance To Empty (DTE) Miles Per Gallon (MPG)/Liters Per 100 km Shows the estimated distance that can be traveled with (L/100km) the fuel remaining in the tank. This estimated distance is The Miles Per Gallon (MPG)/Liters Per 100 km (L/100km) determined by a weighted average of the instantaneous feature displays instantaneous fuel economy in a bar graph and average fuel economy, according to the current fuel below the DTE, this function cannot be reset.
UNDERSTANDING YOUR INSTRUMENT PANEL 327 or other feature is in the EVIC main display, the ACC time will toggle the unit of measure between mph status will be displayed in place of the EVIC odometer or km/h. Press the BACK button to return to the main menu. line. • For vehicles with Cruise, one of several messages will be displayed giving a dynamic status update of the feature as the driver changes feature status or conditions change.
328 UNDERSTANDING YOUR INSTRUMENT PANEL Press the UP/DOWN buttons to cycle through all the Resetting A Trip Info Function Trip Computer functions or press the BACK button to To Reset any of the three Trip Info functions, select the return to the main menu. function you want to reset using the UP or DOWN The Trip Functions mode displays the following informa- buttons. Push the SELECT button until the feature displays zero.
UNDERSTANDING YOUR INSTRUMENT PANEL 329 Tire PSI is an information only function and cannot be • Oil Temperature reset. Press and release the BACK button to return to the Displays the actual oil temperature. main menu. • Oil Pressure Vehicle Info (Customer Information Features) Displays the actual oil pressure. Press and release the UP or DOWN button until ⬙Vehicle Info⬙ is highlighted in the EVIC. Press and release the • Trans Temperature SELECT button and Coolant Temp will be displayed.
330 UNDERSTANDING YOUR INSTRUMENT PANEL change settings (i.e., 30, 60, 90), press the center of the control knob one or more times to select or change a Select from Main Menu using the DOWN button. Presssetting (i.e., ON, OFF). ing the SELECT button blanks the menu display. Pressing any one of the four steering wheel buttons brings the Soft-Keys menu back. Soft-Keys are accessible on the Uconnect® Touchscreen.
UNDERSTANDING YOUR INSTRUMENT PANEL 331 When making a selection, press the soft-key to enter the • Display Brightness With Headlights ON desired mode. Once in the desired mode press and release When in this display, you may select the brightness with the preferred setting until a check-mark appears next to the the headlights on. Adjust the brightness with the “+” and setting, showing that setting has been selected.
332 UNDERSTANDING YOUR INSTRUMENT PANEL language soft-key until a check-mark appears next to the • Touchscreen Beep language, showing that setting has been selected. Touch When in this display, you may turn on or shut off the the back arrow soft-key to return to the previous menu. sound heard when a touchscreen button (soft-key) is • Units pressed.
UNDERSTANDING YOUR INSTRUMENT PANEL 333 • Fuel Saver Display In Cluster — If Equipped Clock The “ECO” message is located in the instrument cluster display, this message can be turned on or off. To make your selection, touch the “Fuel Saver Display” soft-key, until a check-mark appears next to the setting, showing that setting has been selected. Touch the back arrow soft-key to return to the previous menu. After pressing the Clock soft-key the following settings will be available.
334 UNDERSTANDING YOUR INSTRUMENT PANEL • Set Time Minutes soft-key until a check-mark appears next to setting, indicating that the setting has been selected. Touch the When in this display, you may adjust the minutes. The back arrow soft-key to return to the previous menu. “Sync with GPS Time” soft-key must be unchecked. To make your selection touch the “+” or “–” soft-keys to Safety & Driving Assistance adjust the minutes up or down.
UNDERSTANDING YOUR INSTRUMENT PANEL 335 For further information, refer to “Adaptive Cruise Con- chime volume settings include “LOW,” “MEDIUM,” and trol (ACC)” in “Understanding The Features Of Your “HIGH.” The factory default volume setting is MEDIUM. Vehicle”. • Rear Park Assist Volume — If Equipped • Park Assist — If Equipped Rear Park Assist chime volume settings can be selected The ParkSense® system will scan for objects behind the from the EVIC or Uconnect® System (if equipped).
336 UNDERSTANDING YOUR INSTRUMENT PANEL • Blind Spot Alert — If Equipped When this feature is selected, the Blind Spot Alert feature can be set to Off, Lights or Lights and Chime. The Blind Spot Alert feature can be activated in “Lights” mode. When this mode is selected, the Blind Spot Monitor (BSM) system is activated and will only show a visual alert in the outside mirrors.
UNDERSTANDING YOUR INSTRUMENT PANEL 337 until a check-mark appears next to setting, showing that next to setting, showing that setting has been selected. setting has been selected. Touch the back arrow soft-key Touch the back arrow soft-key to return to the previous menu. to return to the previous menu. • Rain Sensing Auto Wipers — If Equipped Lights When this feature is selected, the system will automatically activate the windshield wipers if it senses moisture on the windshield.
338 UNDERSTANDING YOUR INSTRUMENT PANEL • Headlight Illumination On Approach to setting, showing that setting has been selected. Press the back arrow button on the touchscreen to return to the When this feature is selected, the headlights will activate previous menu. and remain on for 0, 30, 60, or 90 seconds when the doors are unlocked with the Remote Keyless Entry (RKE) • Auto Dim High Beams — If Equipped transmitter.
UNDERSTANDING YOUR INSTRUMENT PANEL 339 press the “Daytime Running Lights” button on the touchscreen, until a check-mark appears next to setting, showing that setting has been selected. Press the back arrow button on the touchscreen to return to the previous menu. To make your selection, press the “Flash Lamps with Lock” button on the touchscreen, until a check-mark appears next to setting, showing that setting has been selected.
340 UNDERSTANDING YOUR INSTRUMENT PANEL • Flash Lamps With Lock • Sound Horn With Remote Start When this feature is selected, the front and headlights will flash when the doors are locked or unlocked with the Remote Keyless Entry (RKE) transmitter. To make your selection, touch the Flash Lights With Lock soft-key, until a check-mark appears next to setting, showing that setting has been selected. Touch the back arrow soft-key to return to the previous menu.
UNDERSTANDING YOUR INSTRUMENT PANEL 341 NOTE: If the vehicle is programmed 1st Press Of Key Fob Unlocks, all doors will unlock no matter which Passive Entry equipped door handle is grasped. If 1st Press Of Key Fob Unlocks is programmed, only the driver’s door will unlock when the driver’s door is grasped. With Passive Entry, if 1st Press Of Key Fob Unlocks is programmed touching the handle more than once will only result in the driver’s door opening.
342 UNDERSTANDING YOUR INSTRUMENT PANEL Seats soft-key, until a check-mark appears next to setting, showing that setting has been selected. Touch the back After pressing the Auto-On Comfort & Remote Start arrow soft-key to return to the previous menu. soft-key the following settings will be available. Engine Off Options • Sound Horn With Remote Start Auto-On Comfort & Remote Start When this feature is selected, the horn will sound when the remote start is activated.
UNDERSTANDING YOUR INSTRUMENT PANEL 343 equipped), and power outlets will remain active for up to 10 minutes after the ignition is cycled to OFF. Opening either front door will cancel this feature. To change the Engine Off Power Delay status touch the 0 seconds, 45 seconds, 5 minutes or 10 minutes soft-key. Then touch the arrow back soft-key. Compass Settings — If Equipped After pressing the Compass Settings soft-key the following settings will be available.
344 UNDERSTANDING YOUR INSTRUMENT PANEL pressing the “ON” soft-key and completing one or more 360-degree turns (in an area free from large metal or metallic objects) until the CAL indicator displayed in the EVIC turns off. The compass will now function normally. Audio After pressing the Audio soft-key the following settings will be available. • Balance/Fade When in this display you may adjust the Balance and Fade settings.
UNDERSTANDING YOUR INSTRUMENT PANEL 345 NOTE: Bass/Mid/Treble allow you to simply slide your Phone/Bluetooth® finger up or down to change the setting as well as touch After pressing the “Phone/Bluetooth®” soft-key the foldirectly on the desired setting. lowing settings will be available. • Speed Adjusted Volume • Paired Devices This feature increases or decreases volume relative to vehicle This feature shows which phones are paired to the speed.
346 UNDERSTANDING YOUR INSTRUMENT PANEL your selection, touch the “Channel Skip” soft-key, select SETTING THE ANALOG CLOCK the channels you would like to skip followed by pressing To set the analog clock at the top center of the instrument the back arrow soft-key. panel, press and hold the button until the setting is correct. • Subscription Information New vehicle purchasers or lessees will receive a free limited time subscription to SiriusXM Satellite Radio with your radio.
UNDERSTANDING YOUR INSTRUMENT PANEL 347 proprietary amplifier and speaker technologies delivering substantial increases in component and system effiThis feature allows an iPod® or external USB device to be ciency levels. plugged into the USB port. The 12 Channel Class D GreenEdge high efficiency iPod® control supports Mini, 4G, Photo, Nano, 5G iPod® amplifier is governed by a high voltage tracking power and iPhone® devices. Some iPod® software versions supply and drives a 7.5-channel playback architecture.
348 UNDERSTANDING YOUR INSTRUMENT PANEL AUX input; and is activated through the Uconnect® System. Refer to “Surround Sound” under “Uconnect® Settings” in “Understanding Your Instrument Panel.” STEERING WHEEL AUDIO CONTROLS The remote sound system controls are located on the rear surface of the steering wheel at the three and nine o’clock positions.
UNDERSTANDING YOUR INSTRUMENT PANEL 349 Pressing the center button will make the radio switch CD Player between the various modes available (AM/FM/SAT/ Pressing the top of the switch once will go to the next CD/HDD/AUX/VES, etc.). track on the CD. Pressing the bottom of the switch once The left-hand control is a rocker-type switch with a will go to the beginning of the current track, or to the pushbutton in the center.
350 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: If you experience difficulty in playing a particular To keep a CD/DVD in good condition, take the following disc, it may be damaged (e.g., scratched, reflective coating removed, a hair, moisture or dew on the disc) precautions: oversized, or have protection encoding. Try a known 1. Handle the disc by its edge; avoid touching the good disc before considering disc player service. surface. RADIO OPERATION AND MOBILE PHONES 2.
UNDERSTANDING YOUR INSTRUMENT PANEL 351 CLIMATE CONTROLS The air conditioning and heating system is designed to make you comfortable in all types of weather. This system can be operated through either the controls on the instrument panel or through the Uconnect® system display. When the Uconnect® system is in different modes (Radio, Player, Settings, More, etc.) the driver and passenger temperature settings will be indicated at the top of the display.
352 UNDERSTANDING YOUR INSTRUMENT PANEL this function again will cause the MAX A/C operation to switch into manual mode and the MAX A/C indicator will turn off. 2. A/C Button Press and release to change the current setting, the indicator illuminates when A/C is ON. Performing this function again will cause the A/C operation to switch into manual mode and the A/C indicator will turn off. 3. Recirculation Button Uconnect® 8.
UNDERSTANDING YOUR INSTRUMENT PANEL 353 5. Front Defrost Button Press and release to change the current airflow setting to Defrost mode. The indicator illuminates when this feature is ON. Air comes from the windshield and side window demist outlets. When the defrost button is selected, the blower level will increase. Use Defrost mode with maximum temperature settings for best windshield and side window defrosting and defogging. Performing this function will cause the ATC to switch into manual mode.
354 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: Pressing this button while in Sync mode will 10. Blower Control automatically exit Sync. Blower control is used to regulate the amount of air 8. Passenger Temperature Control Down Button forced through the climate system. There are seven Provides the passenger with independent temperature blower speeds available. Adjusting the blower will cause automatic mode to switch to manual operation. The control. Push the button for cooler temperature settings.
UNDERSTANDING YOUR INSTRUMENT PANEL 355 NOTE: BI-LEVEL mode is designed under comfort conditions to provide cooler air out of the panel outlets and The airflow distribution mode can be adjusted so air warmer air from the floor outlets. comes from the instrument panel outlets, floor outlets, • Floor Mode demist outlets and defrost outlets. The Mode settings are as follows: Air comes from the floor outlets. A slight amount 11.
356 UNDERSTANDING YOUR INSTRUMENT PANEL cool dehumidified air will flow through the outlets into the cabin. For improved fuel economy, press the A/C Provides the driver with independent temperature conbutton to turn off the air conditioning and manually trol. Push the button for cooler temperature settings. adjust the blower and airflow mode settings. Also, make NOTE: In Sync mode, this button will also automatically sure to select only Panel, Bi-Level or Floor modes.
UNDERSTANDING YOUR INSTRUMENT PANEL 357 MAX A/C Max A/C sets the control for maximum cooling performance.Press and release to toggle between Max A/C and the prior settings. The soft-key illuminates when Max A/C is ON. NOTE: In cold weather, use of Recirculation mode may lead to excessive window fogging. The recirculation feature may be unavailable (soft-key button greyed out). The Recirculation mode is not allowed in Defrost mode to improve window clearing operation.
358 UNDERSTANDING YOUR INSTRUMENT PANEL 3. When the system is set up for your comfort level, it is not necessary to change the settings. You will experience the greatest efficiency by simply allowing the system to function automatically. Manual Operation Override NOTE: • It is not necessary to move the temperature settings for cold or hot vehicles. The system automatically adjusts the temperature, mode, and blower speed to provide comfort as quickly as possible.
UNDERSTANDING YOUR INSTRUMENT PANEL 359 Operating Tips Vacation Storage Summer Operation Any time you store your vehicle or keep it out of service (i.e., vacation) for two weeks or more, run the air conditioning system at idle for about five minutes in the fresh air and high blower setting. This will ensure adequate system lubrication to minimize the possibility of compressor damage when the system is started again.
360 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: A/C Air Filter • Recirculate without A/C should not be used for long The climate control system filters outside air containing dust, pollen and some odors. Strong odors cannot be periods, as fogging may occur. totally filtered out. Refer to “Maintenance Procedures” in • Automatic Temperature Controls (ATC) will automati- “Maintaining Your Vehicle” for filter replacement cally adjust the climate control settings to reduce or instructions.
STARTING AND OPERATING CONTENTS 䡵 STARTING PROCEDURES . . . . . . . . . . . . . . . .366 ▫ Key Ignition Park Interlock. . . . . . . . . . . . . . .373 ▫ Automatic Transmission . . . . . . . . . . . . . . . .366 ▫ Brake/Transmission Shift Interlock System . . .374 ▫ Keyless Enter-N-Go™ . . . . . . . . . . . . . . . . . .367 ▫ Eight-Speed Automatic Transmission — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . .374 ▫ Normal Starting. . . . . . . . . . . . . . . . . . . . . . .
362 STARTING AND OPERATING 䡵 ALL-WHEEL DRIVE (AWD) — IF EQUIPPED . .395 ▫ Anti-Lock Brake System (ABS) . . . . . . . . . . . .405 䡵 DRIVING ON SLIPPERY SURFACES . . . . . . . . .396 ▫ Traction Control System (TCS) . . . . . . . . . . . .405 ▫ Acceleration . . . . . . . . . . . . . . . . . . . . . . . . .396 ▫ Brake Assist System (BAS) . . . . . . . . . . . . . . .406 ▫ Traction . . . . . . . . . . . . . . . . . . . . . . . . . . . .396 ▫ Electronic Stability Control (ESC) . . . . . . . . . .
STARTING AND OPERATING 363 ▫ Tire Terminology And Definitions . . . . . . . . . .420 ▫ Replacement Tires . . . . . . . . . . . . . . . . . . . . .436 ▫ Tire Loading And Tire Pressure . . . . . . . . . . .421 䡵 TIRE CHAINS (TRACTION DEVICES) . . . . . . .437 䡵 TIRES — GENERAL INFORMATION . . . . . . . .426 䡵 TIRE ROTATION RECOMMENDATIONS . . . . .439 ▫ Tire Pressure . . . . . . . . . . . . . . . . . . . . . . . .426 䡵 TIRE PRESSURE MONITOR SYSTEM (TPMS) . .440 ▫ Tire Inflation Pressures . . . . . . . . .
364 STARTING AND OPERATING ▫ MMT In Gasoline . . . . . . . . . . . . . . . . . . . . .453 ▫ Replacement Parts . . . . . . . . . . . . . . . . . . . .458 ▫ Materials Added To Fuel . . . . . . . . . . . . . . . .454 ▫ Maintenance . . . . . . . . . . . . . . . . . . . . . . . .459 ▫ Fuel System Cautions. . . . . . . . . . . . . . . . . . .454 䡵 ADDING FUEL . . . . . . . . . . . . . . . . . . . . . . . .459 ▫ Carbon Monoxide Warnings . . . . . . . . . . . . .455 ▫ Emergency Fuel Filler Door Release. . . .
STARTING AND OPERATING 365 ▫ Trailer Towing Weights (Maximum Trailer Weight Ratings) . . . . . . . . . . . . . . . . . . . . . .469 ▫ Towing Tips . . . . . . . . . . . . . . . . . . . . . . . . .476 ▫ Trailer And Tongue Weight . . . . . . . . . . . . . .469 䡵 RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.) . . . . . . . . . . . . . . . . . . .477 ▫ Towing Requirements . . . . . . . . . . . . . . . . . .471 ▫ Two-Wheel Drive And All-Wheel Drive . . . . . .
366 STARTING AND OPERATING STARTING PROCEDURES WARNING! (Continued) Before starting your vehicle, adjust your seat, adjust the inside and outside mirrors, fasten your seat belt, and if present, instruct all other occupants to buckle their seat belts. WARNING! • When leaving the vehicle, always remove the Key Fob from the ignition and lock your vehicle. • Never leave children alone in a vehicle, or with access to an unlocked vehicle.
STARTING AND OPERATING 367 CAUTION! Damage to the transmission may occur if the following precautions are not observed: • Do not shift from REVERSE, PARK, or NEUTRAL into any forward gear when the engine is above idle speed. • Shift into PARK only after the vehicle has come to a complete stop. • Shift into or out of REVERSE only after the vehicle has come to a complete stop and the engine is at idle speed. • Before shifting into any gear, make sure your foot is firmly on the brake pedal.
368 STARTING AND OPERATING 4. If you wish to stop the cranking of the engine prior to the engine starting, press the button again. NOTE: Normal starting of either a cold or a warm engine is obtained without pumping or pressing the accelerator pedal. To Turn Off The Engine Using ENGINE START/STOP Button will shut off. The ignition switch position will remain in the ACC position until the shift lever/gear selector is in PARK and the button is pressed twice to the OFF position.
STARTING AND OPERATING 369 ENGINE START/STOP Button Functions — With Driver’s Foot OFF The Brake Pedal (In PARK Or NEUTRAL Position) Extreme Cold Weather (Below –20°F Or −29°C) To ensure reliable starting at these temperatures, use of an externally powered electric engine block heater (availThe ENGINE START/STOP button operates similar to an able from your authorized dealer) is recommended. ignition switch. It has three positions, OFF, ACC, RUN.
370 STARTING AND OPERATING WARNING! (Continued) • Do not attempt to push or tow your vehicle to get it started. Vehicles equipped with an automatic transmission cannot be started this way. Unburned fuel could enter the catalytic converter and once the engine has started, ignite and damage the converter and vehicle. • If the vehicle has a discharged battery, booster cables may be used to obtain a start from a booster battery or the battery in another vehicle.
STARTING AND OPERATING 371 The engine block heater cord is routed under the hood on the driver side of the vehicle. It has a removable cap that The idle speed is controlled automatically and it will is located on the driver side of the Integrated Power decrease as the engine warms up. Module. ENGINE BLOCK HEATER — IF EQUIPPED After Starting The engine block heater warms the engine, and permits quicker starts in cold weather.
372 STARTING AND OPERATING AUTOMATIC TRANSMISSION WARNING! (Continued) WARNING! • Unintended movement of a vehicle could injure those in or near the vehicle. As with all vehicles, you should never exit a vehicle while the engine is running. Before exiting a vehicle, always apply the parking brake, shift the transmission into PARK, turn the engine OFF, and remove the Key Fob. When the ignition is in the OFF position, the transmission is locked in PARK, securing the vehicle against unwanted movement.
STARTING AND OPERATING 373 WARNING! (Continued) CAUTION! (Continued) • Children should be warned not to touch the parking brake, brake pedal or the shift lever. • Do not leave the Key Fob in or near the vehicle (or in a location accessible to children), and do not leave the ignition of a vehicle equipped with Keyless Enter-N-Go™ in the ACC or ON/RUN mode. A child could operate power windows, other controls, or move the vehicle.
374 STARTING AND OPERATING the transmission in PARK. This system also locks the Eight-Speed Automatic Transmission — If transmission in PARK whenever the ignition switch is in Equipped the OFF position. Your vehicle is equipped with a fuel efficient eight-speed transmission. The electronic shift lever in this vehicle Brake/Transmission Shift Interlock System does not slide like a conventional shifter.
STARTING AND OPERATING 375 once (such as PARK to DRIVE), move the lever past the first (or second) detent. Select the DRIVE range for normal driving. The electronically-controlled transmission provides a precise shift schedule. The transmission electronics are self-calibrating; therefore, the first few shifts on a new vehicle may be somewhat abrupt. This is a normal condition, and precision shifts will develop within a few hundred miles (kilometers).
376 STARTING AND OPERATING mode. You do not need to press the lock button when Shifting From REVERSE To NEUTRAL toggling between DRIVE and SPORT modes. Pull the shift lever rearward to the first detent and Manual shifts can be made using the AutoStick® shift release. “N” will be highlighted in the EVIC. control (refer to “AutoStick®” in this section).
STARTING AND OPERATING 377 Shifting From REVERSE To DRIVE Vehicles Equipped With LOW Mode Bring the vehicle to a complete stop, firmly press the To shift from DRIVE to LOW, pull the shift lever rearbrake pedal, then pull the shift lever fully rearward and ward until “L” is highlighted in the EVIC. release when “D” is highlighted in the EVIC. To shift back into DRIVE from LOW, pull the shift lever To shift back into REVERSE from DRIVE, bring the rearward until “D” is highlighted in the EVIC.
378 STARTING AND OPERATING Never attempt to use PARK while the vehicle is in motion. Apply the parking brake when leaving the vehicle in this range. When parking on a level surface, you may shift the transmission into PARK first, and then apply the parking brake. When parking on a hill, apply the parking brake before shifting the transmission to PARK, otherwise the load on the transmission locking mechanism may make it difficult to move the shift lever out of PARK.
STARTING AND OPERATING 379 WARNING! (Continued) WARNING! (Continued) • It is dangerous to shift out of PARK or NEUTRAL if the engine speed is higher than idle speed. If your foot is not firmly pressing the brake pedal, the vehicle could accelerate quickly forward or in reverse. You could lose control of the vehicle and hit someone or something. Only shift into gear when the engine is idling normally and your foot is firmly pressing the brake pedal.
380 STARTING AND OPERATING WARNING! (Continued) CAUTION! • Never leave children alone in a vehicle, or with access to an unlocked vehicle. Allowing children to be in a vehicle unattended is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Children should be warned not to touch the parking brake, brake pedal or the shift lever.
STARTING AND OPERATING 381 • Look at the transmission gear position display and verify that it indicates the PARK position. • With brake pedal released, verify that the shift lever will not move out of PARK. REVERSE (R) This range is for moving the vehicle backward. Shift into REVERSE only after the vehicle has come to a complete stop. NEUTRAL (N) Use this range when the vehicle is standing for prolonged periods with the engine running. The engine may be started in this range.
382 STARTING AND OPERATING DRIVE (D) This range should be used for most city and highway driving. It provides the smoothest upshifts and downshifts, and the best fuel economy. The transmission automatically upshifts through all forward gears. The DRIVE position provides optimum driving characteristics under all normal operating conditions. vehicle speed. Normal operation will resume once the transmission temperature has risen to a suitable level.
STARTING AND OPERATING 383 NOTE: In cases where the instrument cluster message indicates the transmission may not re-engage after enTransmission function is monitored electronically for gine shutdown, perform this procedure only in a desired abnormal conditions. If a condition is detected that could location (preferably, at your authorized dealer). result in transmission damage, Transmission Limp Home Mode is activated. In this mode, the transmission may 1. Stop the vehicle.
384 STARTING AND OPERATING NOTE: Even if the transmission can be reset, we recommend that you visit your authorized dealer at your earliest possible convenience. Your authorized dealer has diagnostic equipment to determine if the problem could recur. vehicle may be somewhat abrupt. This is a normal condition, and precision shifts will develop within a few hundred miles (kilometers).
STARTING AND OPERATING 385 NOTE: • After selecting any gear range, wait a moment to allow the selected gear to engage before accelerating. This is especially important when the engine is cold. • If there is a need to restart the engine, be sure to cycle the ignition to the OFF position before restarting. Transmission gear engagement may be delayed after restarting the engine if the ignition is not cycled to the OFF position first.
386 STARTING AND OPERATING When parking on a level surface, you may shift the transmission into PARK first, and then apply the parking brake. When parking on a hill, apply the parking brake before shifting the transmission to PARK, otherwise the load on the transmission locking mechanism may make it difficult to move the shift lever out of PARK. As an added precaution, turn the front wheels toward the curb on a downhill grade and away from the curb on an uphill grade.
STARTING AND OPERATING 387 WARNING! (Continued) WARNING! (Continued) • Unintended movement of a vehicle could injure those in or near the vehicle. As with all vehicles, you should never exit a vehicle while the engine is running. Before exiting a vehicle, always apply the parking brake, shift the transmission into PARK, turn the engine OFF, and remove the Key Fob. When the ignition is in the OFF position, the transmission is locked in PARK, securing the vehicle against unwanted movement.
388 STARTING AND OPERATING CAUTION! • Before moving the shift lever out of PARK, you must turn the ignition switch from the LOCK/OFF position to the ON/RUN position, and also press the brake pedal. Otherwise, damage to the shift lever could result. • DO NOT race the engine when shifting from PARK or NEUTRAL into another gear range, as this can damage the drivetrain. • Look at the transmission gear position display and verify that it indicates the PARK position.
STARTING AND OPERATING 389 WARNING! Do not coast in NEUTRAL and never turn off the ignition to coast down a hill. These are unsafe practices that limit your response to changing traffic or road conditions. You might lose control of the vehicle and have a collision. CAUTION! Towing the vehicle, coasting, or driving for any other reason with the transmission in NEUTRAL can cause severe transmission damage.
390 STARTING AND OPERATING may be illuminated. Limp Home Mode allows the vehicle to be driven to an authorized dealer for service without This mode alters the transmission’s automatic shift damaging the transmission. schedule for sportier driving. Upshift speeds are increased to make full use of available engine power.
STARTING AND OPERATING 391 NOTE: Even if the transmission can be reset, we recommend that you visit your authorized dealer at your earliest possible convenience. Your authorized dealer has diagnostic equipment to determine if the problem could recur. AUTOSTICK® — IF EQUIPPED AutoStick® is a driver-interactive transmission feature providing manual shift control, giving you more control of the vehicle.
392 STARTING AND OPERATING gear, while using (+) to enter AutoStick® mode will • If AutoStick® is engaged while in SPORT mode, retain the current gear. When AutoStick® is active, the manual gear selection will be maintained until either SPORT mode is exited or as described below. The current transmission gear is displayed in the instrument transmission will not upshift automatically at redline cluster.
STARTING AND OPERATING 393 To disengage AutoStick® mode, press and hold the (+) shift paddle until “D” or “S” is once again indicated in the instrument cluster. You can shift in or out of the AutoStick® mode at any time without taking your foot off the accelerator pedal. WARNING! Do not downshift for additional engine braking on a slippery surface. The drive wheels could lose their grip and the vehicle could skid, causing a collision or personal injury.
394 STARTING AND OPERATING • If AutoStick® is engaged while in SPORT mode, • The system will ignore attempts to upshift at too low manual gear selection will be maintained until either of a vehicle speed. SPORT mode is exited or as described below. The • Avoid using speed control when AutoStick® is engaged. transmission will not upshift automatically at redline in this mode, nor will downshifts be obtained if the • Transmission shifting will be more noticeable when AutoStick® is engaged.
STARTING AND OPERATING 395 ALL-WHEEL DRIVE (AWD) — IF EQUIPPED the windshield wipers for an extended period of time. Drive mode, RWD or AWD, is displayed momentarily in the Electronic Vehicle Information Center (EVIC) in the gauge area of the vehicle display when the transmission is first shifted into gear, and if the drive mode changes during vehicle operation.
396 STARTING AND OPERATING DRIVING ON SLIPPERY SURFACES Traction Acceleration When driving on wet or slushy roads, it is possible for a wedge of water to build up between the tire and road surface. This is known as hydroplaning and may cause partial or complete loss of vehicle control and stopping ability.
STARTING AND OPERATING 397 Your vehicle may be equipped with a Limited Slip Differential (LSD) that reduces, but does not eliminate, the amount of wheel slip across a given axle for improved handling. WARNING! (Continued) your vehicle away swiftly. Failure to follow this warning may result in injuries that are serious or fatal to you, your passengers, and others around you.
398 STARTING AND OPERATING WARNING! (Continued) CAUTION! (Continued) • Driving through standing water limits your vehicle’s braking capabilities, which increases stopping distances. Therefore, after driving through standing water, drive slowly and lightly press on the brake pedal several times to dry the brakes. • Failure to follow these warnings may result in injuries that are serious or fatal to you, your passengers, and others around you.
STARTING AND OPERATING 399 CAUTION! (Continued) • Getting water inside your vehicle’s engine can cause it to lock up and stall out, and cause serious internal damage to the engine. Such damage is not covered by the New Vehicle Limited Warranty. POWER STEERING CAUTION! Extreme steering maneuvers may cause the electrically driven pump to reduce or stop power steering assistance in order to prevent damage to the system. Normal operation will resume once the system is allowed to cool.
400 STARTING AND OPERATING steering maneuvers may have occurred, which caused an over temperature condition in the power steering system. You will lose power steering assistance momentarily until the over temperature condition no longer exists. Once driving conditions are safe, then pull over and let vehicle idle for a few moments until the light turns off. Refer to “Electronic Vehicle Information (EVIC)” in “Understanding Your Instrument Panel” for further information. FUEL SAVER TECHNOLOGY 5.
STARTING AND OPERATING 401 release the parking brake, press the park brake pedal a NOTE: second time and let your foot up as you feel the brake • When the parking brake is applied and the transmisdisengage. sion is placed in gear, the “Brake Warning Light” will flash. If vehicle speed is detected, a chime will sound to alert the driver. Fully release the parking brake before attempting to move the vehicle. • This light only shows that the parking brake is applied.
402 STARTING AND OPERATING WARNING! WARNING! (Continued) • Never use the PARK position as a substitute for the parking brake. Always apply the parking brake fully when parked to guard against vehicle movement and possible injury or damage. • When leaving the vehicle, always remove the Key Fob from the ignition and lock your vehicle. • Never leave children alone in a vehicle, or with access to an unlocked vehicle. Allowing children to be in a vehicle unattended is dangerous for a number of reasons.
STARTING AND OPERATING 403 CAUTION! If the “Brake Warning Light” remains on with the parking brake released, a brake system malfunction is indicated. Have the brake system serviced by an authorized dealer immediately. ANTI-LOCK BRAKE SYSTEM related motor noises. These noises are the system performing its self check cycle to ensure that the ABS is working properly. This self check occurs each time the vehicle is started and accelerated past 7 mph (11 km/h).
404 STARTING AND OPERATING WARNING! WARNING! (Continued) • The ABS contains sophisticated electronic equipment that may be susceptible to interference caused by improperly installed or high output radio transmitting equipment. This interference can cause possible loss of anti-lock braking capability. Installation of such equipment should be performed by qualified professionals. • Pumping of the Anti-Lock Brakes will diminish their effectiveness and may lead to a collision.
STARTING AND OPERATING 405 ELECTRONIC BRAKE CONTROL SYSTEM Your vehicle is equipped with an advanced electronic brake control system that include Anti-Lock Brake System (ABS), Traction Control System (TCS), Brake Assist System (BAS), and the Electronic Stability Control (ESC). All four of these systems work together to enhance vehicle stability and control in various driving conditions. Also, your vehicle may be equipped with Hill Start Assist (HSA), Ready Alert Braking, and Rain Brake Support.
406 STARTING AND OPERATING A feature of the TCS system, Brake Lock Differential (BLD), controls the wheel spin across a driven axle. If one wheel on a driven axle is spinning faster than the other, the system will apply the brake of the spinning wheel. This will allow more engine torque to be applied to the wheel that is not spinning. This feature remains active even if TCS and ESC are in the “Partial Off” mode. Refer to “Electronic Stability Control (ESC)” in this section for more information.
STARTING AND OPERATING 407 Electronic Stability Control (ESC) This system enhances directional control and stability of the vehicle under various driving conditions. The ESC corrects for oversteering and understeering the vehicle by applying the brake of the appropriate wheel. Engine power may also be reduced to assist in counteracting the condition of oversteer or understeer and help the vehicle maintain the desired path.
408 STARTING AND OPERATING The “ESC Off” switch is located on the switch bank in the The ESC system has two or three available operating center of the instrument panel. To enter the “Partial Off” mode, momentarily press the “ESC Off” switch and the modes: ⬙ESC off indicator light⬙ will illuminate. To turn the ESC ESC On on again, momentarily press the “ESC Off” switch and the ⬙ESC off indicator light⬙ will turn off. This is the normal operating mode for the ESC.
STARTING AND OPERATING 409 NOTE: Full Off — If Equipped • To improve the vehicle’s traction when driving with snow chains, or when starting off in deep snow, sand, or gravel, it may be desirable to switch to the “Partial Off” mode by momentarily pressing the “ESC Off” switch. Once the situation requiring “Partial Off” mode is overcome, turn the ESC on again by momentarily pressing the “ESC Off” switch. This may be done while the vehicle is in motion.
410 STARTING AND OPERATING WARNING! (Continued) ESC system will not engage to assist in maintaining stability. ⴖESC Offⴖ mode is intended for off-highway or off-road use only. Hill Start Assist (HSA) The HSA system is designed to assist the driver when starting a vehicle from a stop on a hill. HSA will maintain the level of brake pressure the driver applied for a short period of time after the driver takes their foot off of the brake pedal.
STARTING AND OPERATING 411 WARNING! WARNING! There may be situations on minor hills with a loaded vehicle, or while pulling a trailer, when the system will not activate and slight rolling may occur. This could cause a collision with another vehicle or object. Always remember the driver is responsible for braking the vehicle. • If you use a trailer brake controller with your trailer, your trailer brakes may be activated and deactivated with the brake switch.
412 STARTING AND OPERATING WARNING! (Continued) • HSA is not a parking brake. If you stop the vehicle on a hill without putting the transmission in PARK and using the parking brake, it will roll down the hill and could cause a collision with another vehicle or object. Always remember to use the parking brake while parking on a hill, and that the driver is responsible for braking the vehicle. occur by monitoring how fast the throttle is released by the driver.
STARTING AND OPERATING 413 flashes when TCS is active. If the “ESC Activation/ Malfunction Indicator Light” begins to flash during acceleration, ease up on the accelerator and apply as little throttle as possible. Be sure to adapt your speed and The “ESC Activation/Malfunction Indicator driving to the prevailing road conditions. Light” in the instrument cluster will come on when the ignition switch is cycled to the ON NOTE: position.
414 STARTING AND OPERATING Synchronizing ESC TIRE SAFETY INFORMATION Tire Markings If the power supply is interrupted (battery disconnected or discharged), the “ESC Activation/Malfunction Indicator Light” may illuminate with the engine running. If this should occur, turn the steering wheel completely to the left and then to the right. The “ESC Activation/ Malfunction Indicator Light” should go out.
STARTING AND OPERATING 415 • Temporary spare tires are designed for temporary emergency use only. Temporary high pressure com• P (Passenger) - Metric tire sizing is based on U.S. pact spare tires have the letter “T” or “S” molded into design standards. P-Metric tires have the letter “P” the sidewall preceding the size designation. Example: molded into the sidewall preceding the size designaT145/80D18 103M. tion. Example: P215/65R15 95H. • High flotation tire sizing is based on U.S.
416 STARTING AND OPERATING Tire Sizing Chart EXAMPLE: Example Size Designation: P215/65R15XL 95H, 215/65R15 96H, LT235/85R16C, T145/80D18 103M, 31x10.5 R15 LT P = Passenger car tire size based on U.S. design standards, or ⴖ....blank....ⴖ = Passenger car tire based on European design standards, or LT = Light truck tire based on U.S.
STARTING AND OPERATING 417 EXAMPLE: R = Construction code – ⬙R⬙ means radial construction, or – ⬙D⬙ means diagonal or bias construction 15, 16, 18 = Rim diameter in inches (in) Service Description: 95 = Load Index – A numerical code associated with the maximum load a tire can carry H = Speed Symbol – A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions – The maximum speed corresponding to the speed symbol should only be
418 STARTING AND OPERATING EXAMPLE: Load Identification: Absence of the following load identification symbols on the sidewall of the tire indicates a Standard Load (SL) tire: • XL = Extra load (or reinforced) tire, or • LL = Light load tire or • C, D, E, F, G = Load range associated with the maximum load a tire can carry at a specified pressure Maximum Load – Maximum load indicates the maximum load this tire is designed to carry Maximum Pressure – Maximum pressure indicates the maximum permissible cold tir
STARTING AND OPERATING 419 EXAMPLE: DOT MA L9 ABCD 0301 DOT = Department of Transportation – This symbol certifies that the tire is in compliance with the U.S.
420 STARTING AND OPERATING Tire Terminology And Definitions Term B-Pillar Cold Tire Inflation Pressure Maximum Inflation Pressure Recommended Cold Tire Inflation Pressure Tire Placard Definition The vehicle B-Pillar is the structural member of the body located behind the front door. Cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least three hours, or driven less than 1 mile (1.6 km) after sitting for a three hour period.
STARTING AND OPERATING 421 Tire Loading And Tire Pressure Tire And Loading Information Placard Location NOTE: The proper cold tire inflation pressure is listed on the driver’s side B-Pillar or the rear edge of the driver’s side door.
422 STARTING AND OPERATING Tire And Loading Information Placard This placard tells you important information about the: 1. Number of people that can be carried in the vehicle. 2. Total weight your vehicle can carry. 3. Tire size designed for your vehicle. 4. Cold tire inflation pressures for the front, rear, and spare tires.
STARTING AND OPERATING 423 Loading To determine the maximum loading conditions of your vehicle, locate the statement “The combined weight of occupants and cargo should never exceed XXX lbs or XXX kg” on the Tire and Loading Information placard. The combined weight of occupants, cargo/luggage and trailer tongue weight (if applicable) should never exceed the weight referenced here. The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle.
424 STARTING AND OPERATING 4. The resulting figure equals the available amount of NOTE: cargo and luggage load capacity. For example, if • If your vehicle will be towing a trailer, load from your “XXX” amount equals 1,400 lbs (635 kg) and there will trailer will be transferred to your vehicle.
STARTING AND OPERATING 425 5
426 STARTING AND OPERATING WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. TIRES — GENERAL INFORMATION Tire Pressure Proper tire inflation pressure is essential to the safe and satisfactory operation of your vehicle.
STARTING AND OPERATING 427 WARNING! (Continued) • Unequal tire pressures from one side of the vehicle to the other can cause the vehicle to drift to the right or left. • Always drive with each tire inflated to the recommended cold tire inflation pressure. NOTE: • Unequal tire pressures from side to side may cause erratic and unpredictable steering response. • Unequal tire pressure from side to side may cause the vehicle to drift left or right.
428 STARTING AND OPERATING CAUTION! After inspecting or adjusting the tire pressure, always reinstall the valve stem cap. This will prevent moisture and dirt from entering the valve stem, which could damage the valve stem. Tire pressures change by approximately 1 psi (7 kPa) per 12°F (7°C) of air temperature change. Keep this in mind when checking tire pressure inside a garage, especially in the winter.
STARTING AND OPERATING 429 loading may be required for high-speed vehicle opera- Radial Ply Tires tion. Refer to your authorized tire dealer or original equipment vehicle dealer for recommended safe operatWARNING! ing speeds, loading and cold tire inflation pressures. Combining radial ply tires with other types of tires on your vehicle will cause your vehicle to handle WARNING! poorly. The instability could cause a collision.
430 STARTING AND OPERATING Consult an authorized tire dealer for tire repairs and Summer Or Three Season Tires — If Equipped additional information. Summer tires provide traction in both wet and dry Damaged Run Flat tires, or Run Flat tires that have conditions, and are not intended to be driven in snow or experienced a loss of pressure should be replaced imme- on ice.
STARTING AND OPERATING 431 If you need snow tires, select tires equivalent in size and type to the original equipment tires. Use snow tires only in sets of four; failure to do so may adversely affect the safety and handling of your vehicle. Run Flat Tires — If Equipped Run Flat tires allow you the capability to drive 50 miles (80 km) at 50 mph (80 km/h) after a rapid loss of inflation pressure. This rapid loss of inflation is referred to as the Run Flat mode.
432 STARTING AND OPERATING rotation for your vehicle. If your vehicle has this option, refer to an authorized tire dealer for the recommended NOTE: For vehicles equipped with TIREFIT instead of a tire rotation pattern. spare tire, please refer to “TIREFIT KIT” in “What To Do Compact Spare Tire — If Equipped In Emergencies” for further information.
STARTING AND OPERATING 433 Do not install a wheel cover or attempt to mount a conventional tire on the compact spare wheel, since the wheel is designed specifically for the compact spare tire. Do not install more than one compact spare tire and wheel on the vehicle at any given time. WARNING! Compact spares are for temporary emergency use only. With these spares, do not drive more than 50 mph (80 km/h). Temporary use spares have limited tread life.
434 STARTING AND OPERATING WARNING! Limited-use spares are for emergency use only. Installation of this limited-use spare tire affects vehicle handling. With this tire, do not drive more than the speed listed on the limit-use spare wheel. Keep inflated to the cold tire inflation pressures listed on your Tire and Loading Information Placard located on the driver’s side B-Pillar or the rear edge of the driver’s side door.
STARTING AND OPERATING 435 tread wear indicators, the tire should be replaced. Refer to “Replacement Tires” in this section for further information. Life Of Tire The service life of a tire is dependent upon varying factors including, but not limited to: • Driving style • Tire pressure • Distance driven • Performance tires, tires with a speed rating of V or higher, and summer tires typically have a reduced tread life. Rotation of these tires per the vehicle maintenance schedule is highly recommended.
436 STARTING AND OPERATING WARNING! Tires and the spare tire should be replaced after six years, regardless of the remaining tread. Failure to follow this warning can result in sudden tire failure. You could lose control and have a collision resulting in serious injury or death. Information placard or the Vehicle Certification Label for the size designation of your tire. The Load Index and Speed Symbol for your tire will be found on the original equipment tire sidewall.
STARTING AND OPERATING 437 WARNING! WARNING! (Continued) • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change suspension dimensions and performance characteristics, resulting in changes to steering, handling, and braking of your vehicle. This can cause unpredictable handling and stress to steering and suspension components. You could lose control and have a collision resulting in serious injury or death.
438 STARTING AND OPERATING • Install on Rear Tires Only. • Due to limited clearance for a Rear Wheel Drive (RWD) vehicle, on 235/55R18 100V and P235/55R18 99V tires, reduced size snow chains or traction devices with a maximum projection of 6 mm beyond the tire profile is recommended. • Due to limited clearance for an All Wheel Drive (AWD) vehicle, P235/55R19 tire with the use of a traction device that meets the SAE type “Class S” specification is recommended.
STARTING AND OPERATING 439 CAUTION! (Continued) • Observe the traction device manufacturer’s instructions on the method of installation, operating speed, and conditions for use. Always use the suggested operating speed of the device manufacturer’s if it is less than 30 mph (48 km/h). • Do not use traction devices on a compact spare tire. TIRE ROTATION RECOMMENDATIONS These effects can be reduced by timely rotation of tires.
440 STARTING AND OPERATING TIRE PRESSURE MONITOR SYSTEM (TPMS) The Tire Pressure Monitor System (TPMS) will warn the driver of a low tire pressure based on the vehicle recommended cold placard pressure. Tire Rotation The tire pressure will vary with temperature by about 1 psi (7 kPa) for every 12°F (6.5°C). This means that when the outside temperature decreases, the tire pressure will decrease. Tire pressure should always be set based on cold inflation tire pressure.
STARTING AND OPERATING 441 also increase as the vehicle is driven - this is normal and may need to be driven for up to 20 minutes above 15 mph there should be no adjustment for this increased pres- (24 km/h) in order for the TPMS to receive this information. sure. The TPMS will warn the driver of a low tire pressure if the tire pressure falls below the low-pressure warning limit for any reason, including low temperature effects and natural pressure loss through the tire.
442 STARTING AND OPERATING CAUTION! • The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and warning have been established for the tire size equipped on your vehicle. Undesirable system operation or sensor damage may result when using replacement equipment that is not of the same size, type, and/or style. Aftermarket wheels can cause sensor damage. Using aftermarket tire sealants may cause the Tire Pressure Monitoring System (TPMS) sensor to become inoperable.
STARTING AND OPERATING 443 • Seasonal temperature changes will affect tire pressure, The matching full size spare wheel and tire assembly (if and the TPMS will monitor the actual tire pressure in equipped) has a TPM sensor. The matching full size spare can be used in place of any of the four road tires. The the tire. TPMS will only monitor the pressure in the full size spare Base System when it is used in place of a road tire.
444 STARTING AND OPERATING pressure value as shown in the ⬙Inflate to XX⬙ message. 2. Installing aftermarket window tinting that contains materials that may block radio wave signals. Once the system receives the updated tire pressures, the system will automatically update and the TPM Telltale 3. Accumulation of snow or ice around the wheels or Light and ⬙LOW TIRE⬙ message will turn off. The vehicle wheel housings.
STARTING AND OPERATING 445 3. Driving the vehicle for up to 20 minutes above 15 mph 3. After driving the vehicle for up to 20 minutes above (24 km/h) will turn off the TPM Telltale Light and 15 mph (24 km/h), the ⬙LOW TIRE⬙ message will turn off and the TPM Telltale Light will flash on and off for ⬙LOW TIRE⬙ message as long as no tire pressure is 75 seconds and then remain on solid. below the low-pressure warning limit in any of the four active road tires. 4.
446 STARTING AND OPERATING Premium System — If Equipped The Tire Pressure Monitor System (TPMS) uses wireless technology with wheel rim mounted electronic sensors to monitor tire pressure levels. Sensors mounted to each wheel as part of the valve stem transmit tire pressure readings to the receiver module. The matching full size spare wheel and tire assembly (if equipped) has a TPM sensor. The full size spare can be used in place of any of the four road tires.
STARTING AND OPERATING 447 will automatically update, the graphic display in the EVIC will stop flashing or change color back to the original color, and the TPM Telltale Light will turn off. The vehicle may need to be driven for up to 20 minutes above 15 mph (24 km/h) in order for the TPMS to receive this information.
448 STARTING AND OPERATING Service TPMS Warning 2. Installing aftermarket window tinting that contains materials that may block radio wave signals. If a system fault is detected, the TPM Telltale Light will flash on and off for 75 seconds and then remain on solid. 3. Accumulation of snow or ice around the wheels or The system fault will also sound a chime. In addition, the wheel housings. EVIC will display a ⬙SERVICE TPM SYSTEM⬙ message 4. Using tire chains on the vehicle.
STARTING AND OPERATING 449 Vehicles With Full Size Spare Vehicles With Compact Spare 1. The matching full size spare wheel and tire assembly 1. The compact spare tire does not have a TPM sensor. Therefore, the TPMS will not monitor the pressure in has a TPM sensor that can be monitored by the TPMS. the compact spare tire. 2. If you install the full size spare in place of a road tire that has a pressure below the low-pressure warning 2.
450 STARTING AND OPERATING 4. For each subsequent ignition switch cycle, a chime will sound, the TPM Telltale Light will flash on and off for 75 seconds and then remain on solid, and the EVIC will display a ⬙SERVICE TPM SYSTEM⬙ message for a minimum of five seconds and then display dashes (- -) in place of the pressure value. General Information This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada.
STARTING AND OPERATING 451 FUEL REQUIREMENTS 3.6L Engine — If Equipped This engine is designed to meet all emissions regulations and provide excellent fuel economy and performance when using high-quality unleaded “regular” gasoline having an octane rating of 87. The use of premium gasoline is not recommended, as it will not provide any benefit over regular gasoline in these engines. 5.
452 STARTING AND OPERATING Reformulated Gasoline Many areas of the country require the use of cleaner burning gasoline referred to as “Reformulated Gasoline.” Reformulated gasoline contain oxygenates and are specifically blended to reduce vehicle emissions and improve air quality. The manufacturer supports the use of reformulated gasoline. Properly blended reformulated gasoline will provide excellent performance and durability of engine and fuel system components.
STARTING AND OPERATING 453 To fix a Non-FFV vehicle inadvertently fueled once with Non-Flex Fuel Vehicles (FFV) are compatible with gaso- E-85 perform the following: line containing 10% ethanol (E10). Gasoline with higher • Drain the fuel tank (see your authorized dealer). ethanol content may void the New Vehicle Limited • Change the engine oil and oil filter. Warranty.
454 STARTING AND OPERATING life and reduces emissions system performance in some Fuel System Cautions vehicles. The manufacturer recommends that gasoline without MMT be used in your vehicle. The MMT content CAUTION! of gasoline may not be indicated on the gasoline pump, therefore, you should ask your gasoline retailer whether Follow these guidelines to maintain your vehicle’s the gasoline contains MMT. MMT is prohibited in Federal performance: • The use of leaded gas is prohibited by Federal law.
STARTING AND OPERATING 455 CAUTION! (Continued) • The use of fuel additives, which are now being sold as octane enhancers, is not recommended. Most of these products contain high concentrations of methanol. Fuel system damage or vehicle performance problems resulting from the use of such fuels or additives is not the responsibility of the manufacturer. NOTE: Intentional tampering with the emissions control system can result in civil penalties being assessed against you.
456 STARTING AND OPERATING WARNING! (Continued) • Guard against carbon monoxide with proper maintenance. Have the exhaust system inspected every time the vehicle is raised. Have any abnormal conditions repaired promptly. Until repaired, drive with all side windows fully open. FLEXIBLE FUEL (3.6L ENGINE ONLY) — IF EQUIPPED E-85 General Information The information in this section is for Flexible Fuel vehicles only.
STARTING AND OPERATING 457 Fuel Requirements NOTE: If your vehicle is E-85 compatible, it will operate on • Use seasonally adjusted E-85 fuel (ASTM D5798). With unleaded gasoline with an octane rating of 87, or E-85 non-seasonally adjusted E-85 fuel, you may experience fuel, or any mixture of these two fuels.
458 STARTING AND OPERATING Chrysler Specification MS-6395. The manufacturer only recommends engine oils that are API Certified and meet the requirements of Material Standard MS-6395. MS-6395 contains additional requirements, developed during extensive fleet testing, to provide additional protection to Chrysler Group LLC engines. Use MOPAR® or an equivalent oil meeting the specification MS-6395.
STARTING AND OPERATING 459 Maintenance CAUTION! Do not use ethanol mixture greater than 85% in your vehicle. It will cause difficulty in cold starting and may affect drivability. ADDING FUEL 5 1. Press the fuel filler door release switch (located in the driver’s door map pocket). Fuel Filler Door Release Switch 2. Open the fuel filler door.
460 STARTING AND OPERATING 3. There is no fuel filler cap. A flapper door inside the pipe seals the system. 4. Insert the fuel nozzle fully into the filler pipe – the nozzle opens and holds the flapper door while refueling. NOTE: Only the correct size nozzle opens the latches allowing the flapper door to open. 5. Fill the vehicle with fuel – when the fuel nozzle “clicks” or shuts off the fuel tank is full. 6. Remove the fuel nozzle and close the fuel door.
STARTING AND OPERATING 461 WARNING! Fuel Funnel CAUTION! To avoid fuel spillage and overfilling, do not “top off” the fuel tank after filling. • Never have any smoking materials lit in or near the vehicle when the fuel door is open or the tank is being filled. • Never add fuel when the engine is running. This is in violation of most state and federal fire regulations and may cause the “Malfunction Indicator Light” to turn on.
462 STARTING AND OPERATING 2. Remove the access cover (located on the left side inner trim panel). Release Cable VEHICLE LOADING Access Cover 3. Pull the release cable. The load carrying capacity of your vehicle is shown on the “Vehicle Certification Label”. This information should be used for passenger and luggage loading as indicated.
STARTING AND OPERATING 463 Do not exceed the specified Gross Vehicle Weight Rating • Type of Vehicle (GVWR) or the Gross Axle Weight Rating (GAWR). • Month Day and Hour of Manufacture (MDH) Vehicle Certification Label The bar code allows a computer scanner to read the VIN. Your vehicle has a Vehicle Certification Label affixed to Gross Vehicle Weight Rating (GVWR) the drivers side B-Pillar or the rear of the driver’s door. The GVWR is the total allowable weight of your vehicle.
464 STARTING AND OPERATING WARNING! Because the front wheels steer the vehicle, it is important that you do not exceed the maximum front or rear GAWR. A dangerous driving condition can result if either rating is exceeded. You could lose control of the vehicle and have a collision. Overloading The load carrying components (axle, springs, tires, wheels, etc.) of your vehicle will provide satisfactory service as long as you do not exceed the GVWR and the front and rear GAWR.
STARTING AND OPERATING 465 NOTE: Common Towing Definitions • Refer to the “Vehicle Certification Label” affixed to the The following trailer towing related definitions will assist rear of the driver’s door for your vehicle’s GVWR and you in understanding the following information: GAWRs. Gross Vehicle Weight Rating (GVWR) • Refer to the “Tire Placard” for your vehicle’s proper The GVWR is the total allowable weight of your vehicle. tire pressure. This includes driver, passengers, cargo and tongue weight.
466 STARTING AND OPERATING measure GTW is to put your fully loaded trailer on a vehicle scale. The entire weight of the trailer must be supported by the scale. Gross Combination Weight Rating (GCWR) The GCWR is the total permissible weight of your vehicle and trailer when weighed in combination. Gross Axle Weight Rating (GAWR) The GAWR is the maximum capacity of the front and rear axles. Distribute the load over the front and rear axles evenly. Make sure that you do not exceed either front or rear GAWR.
STARTING AND OPERATING 467 Trailer Sway Control Weight-Distributing Hitch The trailer sway control is a telescoping link that can be installed between the hitch receiver and the trailer tongue that typically provides adjustable friction associated with the telescoping motion to dampen any unwanted trailer swaying motions while traveling. A weight-distributing system works by applying leverage through spring (load) bars.
468 STARTING AND OPERATING WARNING! • An improperly adjusted Weight Distributing Hitch system may reduce handling, stability, braking performance, and could result in a collision. • Weight Distributing Systems may not be compatible with Surge Brake Couplers. Consult with your hitch and trailer manufacturer or a reputable Recreational Vehicle dealer for additional information.
STARTING AND OPERATING 469 Trailer Towing Weights (Maximum Trailer Weight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. Engine/Transmission 3.6L Automatic 5.7L Automatic Max. GTW (Gross Trailer Weight) 22 sq ft (2.04 sq m) 1,000 lbs (454 kg) 32 sq ft (2.97 sq m) 1,000 lbs (454 kg) Refer to local laws for maximum trailer towing speeds.
470 STARTING AND OPERATING Never exceed the maximum tongue weight stamped on Consider the following items when computing the your bumper or trailer hitch. weight on the rear axle of the vehicle: • The tongue weight of the trailer. • The weight of any other type of cargo or equipment put in or on your vehicle. • The weight of the driver and all passengers. NOTE: Remember that everything put into or on the trailer adds to the load on your vehicle.
STARTING AND OPERATING 471 Towing Requirements WARNING! (Continued) To promote proper break-in of your new vehicle drivetrain components the following guidelines are recommended: WARNING! Improper towing can lead to an injury collision. Follow these guidelines to make your trailer towing as safe as possible: • Make certain that the load is secured in the trailer and it will not shift during travel.
472 STARTING AND OPERATING WARNING! (Continued) CAUTION! • Total weight must be distributed between the tow vehicle and the trailer such that the following four ratings are not exceeded: • Do not tow a trailer at all during the first 500 miles (805 km) the new vehicle is driven. The engine, axle or other parts could be damaged. • Then, during the first 500 miles (805 km) that a trailer is towed, do not drive over 50 mph (80 km/h) and do not make starts at full throttle.
STARTING AND OPERATING 473 • Check the trailer tires for proper tire inflation pres- • An electronically actuated trailer brake controller is required when towing a trailer with electronically sures before trailer usage. actuated brakes. When towing a trailer equipped with • Check for signs of tire wear or visible tire damage a hydraulic surge actuated brake system, an electronic before towing a trailer. Refer to “Tires – General brake controller is not required.
474 STARTING AND OPERATING WARNING! (Continued) Towing Requirements — Trailer Lights And Wiring • Towing any trailer will increase your stopping distance. When towing you should allow for additional space between your vehicle and the vehicle in front of you. Failure to do so could result in a collision. Whenever you pull a trailer, regardless of the trailer size, stoplights and turn signals on the trailer are required for motoring safety.
STARTING AND OPERATING 475 5 Four-Pin Connector 1 — Female Pins 2 — Male Pin 3 — Ground 4 — Park 5 — Left Stop/Turn 6 — Right Stop/Turn Seven-Pin Connector 1 2 3 4 — — — — Battery Backup Lamps Right Stop/Turn Electric Brakes 5 — Ground 6 — Left Stop/Turn 7 — Running Lamps
476 STARTING AND OPERATING If you REGULARLY tow a trailer for more than 45 minutes of continuous operation, then change the transBefore setting out on a trip, practice turning, stopping, mission fluid and filter as specified for “police, taxi, fleet, and backing up the trailer in an area located away from or frequent trailer towing⬙ (five-speed transmission heavy traffic. only). Refer to the “Maintenance Schedule” for the Automatic Transmission proper maintenance intervals.
STARTING AND OPERATING 477 avoids frequent downshifts. For example, choose “4” if Air Conditioning the desired speed can be maintained. Choose “3” or Turn off temporarily. “2” if needed to maintain the desired speed. • To prevent excess heat generation, avoid continuous RECREATIONAL TOWING (BEHIND driving at high RPM. Reduce vehicle speed as neces- MOTORHOME, ETC.) sary to avoid extended driving at high RPM.
WHAT TO DO IN EMERGENCIES CONTENTS 䡵 HAZARD WARNING FLASHERS . . . . . . . . . . .481 ▫ Road Tire Installation . . . . . . . . . . . . . . . . . . .493 䡵 IF YOUR ENGINE OVERHEATS . . . . . . . . . . . .481 䡵 JUMP-STARTING PROCEDURES . . . . . . . . . . .494 䡵 WHEEL AND TIRE TORQUE SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . .482 ▫ Torque Specifications . . . . . . . . . . . . . . . . . . .483 䡵 JACKING AND TIRE CHANGING . . . . . . . . . .484 ▫ Jack Location/Spare Tire Stowage . . . . . . . .
480 WHAT TO DO IN EMERGENCIES 䡵 TOWING A DISABLED VEHICLE . . . . . . . . . . .504 ▫ Rear-Wheel Drive (RWD) Models . . . . . . . . . .506 ▫ All Wheel Drive (AWD) Models . . . . . . . . . . .506 ▫ Without The Key Fob . . . . . . . . . . . . . . . . . . .
WHAT TO DO IN EMERGENCIES 481 HAZARD WARNING FLASHERS NOTE: With extended use the Hazard Warning flashers may wear down your battery. The Hazard Warning flasher switch is located in the center of the instrument panel between the center air IF YOUR ENGINE OVERHEATS outlets. In any of the following situations, you can reduce the Press the switch to turn on the Hazard Warning potential for overheating by taking the appropriate acflashers. When the switch is activated, all direc- tion.
482 WHAT TO DO IN EMERGENCIES • You can also turn the temperature control to maximum heat, the mode control to floor and the blower control to high. This allows the heater core to act as a supplement to the radiator and aids in removing heat from the engine cooling system. CAUTION! Driving with a hot cooling system could damage your vehicle. If the temperature gauge reads “H,” pull over and stop the vehicle.
WHAT TO DO IN EMERGENCIES 483 Torque Specifications Lug Nut/Bolt Torque **Lug Nut/ Bolt Size 130 Ft-Lbs (176 N·m) M14 x 1.50 Lug Nut/ Bolt Socket Size 22 mm **Use only Chrysler recommended lug nuts/bolts and clean or remove any dirt or oil before tightening. Inspect the wheel mounting surface prior to mounting the tire and remove any corrosion or loose particles. 6 Wheel Mounting Surface Tighten the lug nuts/bolts in a star pattern until each nut/bolt has been tightened twice.
484 WHAT TO DO IN EMERGENCIES JACKING AND TIRE CHANGING WARNING! Torque Patterns WARNING! To avoid the risk of forcing the vehicle off the jack, do not tighten the lug nuts fully until the vehicle has been lowered. Failure to follow this warning may result in personal injury. • Do not attempt to change a tire on the side of the vehicle close to moving traffic. Pull far enough off the road to avoid the danger of being hit when operating the jack or changing the wheel.
WHAT TO DO IN EMERGENCIES 485 WARNING! (Continued) • The jack is designed to be used as a tool for changing tires only. The jack should not be used to lift the vehicle for service purposes. The vehicle should be jacked on a firm level surface only. Avoid ice or slippery areas. Jack Location/Spare Tire Stowage The jack and spare tire are both stowed under an access cover in the trunk. Follow these steps to access the jack and spare tire.
486 WHAT TO DO IN EMERGENCIES Spare Tire Fastener 4. Remove the spare tire. 5. Remove the fastener securing the jack. Jack Fastener 6. Remove the jack and lug wrench assembly from under the spare tire. Turn the jack screw to the left to loosen the lug wrench, and remove the wrench from the jack assembly.
WHAT TO DO IN EMERGENCIES 487 WARNING! A loose tire or jack thrown forward in a collision or hard stop could endanger the occupants of the vehicle. Always stow the jack parts and the spare tire in the places provided. Have the deflated (flat) tire repaired or replaced immediately. 2. Turn on the Hazard Warning flasher. 3. Set the parking brake. 4. Place the shift lever into PARK. 5. Turn OFF the ignition. 6. Block both the front and rear of the wheel diagonally opposite of the jacking position.
488 WHAT TO DO IN EMERGENCIES Jacking And Changing A Tire WARNING! (Continued) WARNING! Carefully follow these tire changing warnings to help prevent personal injury or damage to your vehicle: • Always park on a firm, level surface as far from the edge of the roadway as possible before raising the vehicle. • Turn on the Hazard Warning flasher. • Block the wheel diagonally opposite the wheel to be raised.
WHAT TO DO IN EMERGENCIES 489 CAUTION! Do not attempt to raise the vehicle by jacking on locations other than those indicated in the Jacking Instructions for this vehicle. 1. Remove the spare tire, jack, and lug wrench. 2. If equipped with aluminum wheels where the center cap covers the lug nuts, use the lug wrench to pry the center cap off carefully before raising the vehicle. 3. Before raising the vehicle, use the lug wrench to loosen, but not remove, the lug nuts on the wheel with the flat tire.
490 WHAT TO DO IN EMERGENCIES Front Jacking Location Rear Jacking Location 5. Raise the vehicle just enough to remove the flat tire and install the spare tire.
WHAT TO DO IN EMERGENCIES 491 WARNING! Raising the vehicle higher than necessary can make the vehicle less stable. It could slip off the jack and hurt someone near it. Raise the vehicle only enough to remove the tire. 6. Remove the lug nuts and tire. 7. Mount the spare tire. CAUTION! Be sure to mount the spare tire with the valve stem facing outward. The vehicle could be damaged if the spare tire is mounted incorrectly.
492 WHAT TO DO IN EMERGENCIES 9. Lower the vehicle to the ground by turning the jack handle counterclockwise. • For vehicles so equipped, do not attempt to install a center cap or wheel cover on the compact spare. 10. Finish tightening the lug nuts. Push down on the wrench while at the end of the handle for increased • Refer to “Compact Spare Tire” and to “Limited-Use leverage. Tighten the lug nuts in a star pattern until Spare” under “Tires—General Information” in each nut has been tightened twice.
WHAT TO DO IN EMERGENCIES 493 WARNING! WARNING! A loose tire or jack thrown forward in a collision or hard stop could endanger the occupants of the vehicle. Always stow the jack parts and the spare tire in the places provided. Have the deflated (flat) tire repaired or replaced immediately. To avoid the risk of forcing the vehicle off the jack, do not tighten the lug nuts fully until the vehicle has been lowered. Failure to follow this warning may result in personal injury. Road Tire Installation 3.
494 WHAT TO DO IN EMERGENCIES JUMP-STARTING PROCEDURES WARNING! If your vehicle has a discharged battery it can be jumpstarted using a set of jumper cables and a battery in Do not attempt jump-starting if the battery is frozen. another vehicle or by using a portable battery booster It could rupture or explode and cause personal injury. pack. Jump-starting can be dangerous if done improperly Preparations For Jump-Start so please follow the procedures in this section carefully.
WHAT TO DO IN EMERGENCIES 495 WARNING! Remote Battery Post Locations 1 — Remote Positive (+) Post 2 — Remote Negative (-) Post • Take care to avoid the radiator cooling fan whenever the hood is raised. It can start anytime the ignition switch is ON. You can be injured by moving fan blades. • Remove any metal jewelry such as rings, watch bands and bracelets that could make an inadvertent electrical contact. You could be seriously injured.
496 WHAT TO DO IN EMERGENCIES 3. If using another vehicle to jump-start the battery, park the vehicle within the jumper cables reach, set the parking brake and make sure the ignition is OFF. WARNING! Do not allow vehicles to touch each other as this could establish a ground connection and personal injury could result. Jump-Starting Procedure WARNING! Failure to follow this jump-starting procedure could result in personal injury or property damage due to battery explosion.
WHAT TO DO IN EMERGENCIES 497 WARNING! Do not connect the jumper cable to the negative (-) post of the discharged battery. The resulting electrical spark could cause the battery to explode and could result in personal injury. Only use the specific ground point, do not use any other exposed metal parts. 2. Disconnect the negative end (-) of the jumper cable from the negative (-) post of the booster battery. 3. Disconnect the positive (+) jumper cable from the positive (+) post of the booster battery. 4.
498 WHAT TO DO IN EMERGENCIES CAUTION! (Continued) the vehicle’s battery will discharge sufficiently to degrade battery life and/or prevent the engine from starting. FREEING A STUCK VEHICLE If your vehicle becomes stuck in mud, sand, or snow, it can often be moved using a rocking motion. Turn the steering wheel right and left to clear the area around the front wheels. Then shift back and forth between DRIVE and REVERSE while gently pressing the accelerator.
WHAT TO DO IN EMERGENCIES 499 NOTE: Press the ⬙ESC Off⬙ switch, to place the Electronic Stability Control (ESC) system in ⬙Partial Off⬙ mode, before rocking the vehicle. Refer to “Electronic Brake Control” in “Starting And Operating” for further information. Once the vehicle has been freed, press the ⬙ESC Off⬙ switch again to restore ⬙ESC On⬙ mode.
500 WHAT TO DO IN EMERGENCIES 3. Remove the rubber liner from the storage tray (located next to the shifter on the center console). 4. Press and maintain firm pressure on the brake pedal. 5. Insert a screwdriver or similar tool into the access port (in the left side of the storage bin), and push and hold the override release lever in. Shift Lever Override 6. Move the shift lever to the NEUTRAL position. 7. The vehicle may then be started in NEUTRAL. 8. Reinstall the rubber storage bin liner.
WHAT TO DO IN EMERGENCIES 501 MANUAL PARK RELEASE — 8 SPEED TRANSMISSION WARNING! Always secure your vehicle by fully applying the parking brake, before activating the Manual Park Release. Activating the Manual Park Release will allow your vehicle to roll away if it is not secured by the parking brake or by proper connection to a tow vehicle. Activating the Manual Park Release on an unsecured vehicle could lead to serious injury or death for those in or around the vehicle.
502 WHAT TO DO IN EMERGENCIES Console Storage Bin Locking Tab 3. Using a small screwdriver or similar tool, fish the 5. While holding the locking tab in the disengaged tether strap up through the opening in the console position, pull the tether strap to rotate the lever up and base. rearward, until it locks in place in the vertical position. The vehicle is now out of PARK and can be towed. 4.
WHAT TO DO IN EMERGENCIES 503 To Reset The Manual Park Release: 1. Push the latch (at the base of the lever, on the rear side) rearward (away from the lever) to unlatch the lever. 2. Rotate the Manual Park Release lever forward and down, to its original position, until the locking tab snaps into place to secure the lever. 3. Pull up gently on the tether strap to confirm that the lever is locked in its stowed position. 4. Tuck the tether strap into the base of the console. Reinstall the console storage bin.
504 WHAT TO DO IN EMERGENCIES TOWING A DISABLED VEHICLE This section describes procedures for towing a disabled vehicle using a commercial wrecker service.
WHAT TO DO IN EMERGENCIES 505 Proper towing or lifting equipment is required to prevent damage to your vehicle. Use only tow bars and other equipment designed for this purpose, following equipment manufacturer’s instructions. Use of safety chains is mandatory. Attach a tow bar or other towing device to main structural members of the vehicle, not to bumpers or associated brackets. State and local laws regarding vehicles under tow must be observed. If you must use the accessories (wipers, defrosters, etc.
506 WHAT TO DO IN EMERGENCIES All Wheel Drive (AWD) Models The manufacturer recommends towing your vehicle with all four wheels OFF the ground using a flatbed. If the transmission and drivetrain are operable, vehicles equipped with AWD can also be towed with the ignition in the ON/RUN position, the transmission in NEUTRAL (not in PARK!), and the rear wheels OFF the ground with no limitation on speed or distance.
WHAT TO DO IN EMERGENCIES 507 • The towing distance must not exceed 15 miles (24 km) for 5-speed transmission, or 30 miles (48 km) for 8-speed transmission. CAUTION! Towing this vehicle in violation of the above requirements can cause severe transmission damage. Damage from improper towing is not covered under the New Vehicle Limited Warranty.
MAINTAINING YOUR VEHICLE CONTENTS 䡵 ENGINE COMPARTMENT — 3.6L . . . . . . . . . .511 ▫ Engine Air Cleaner Filter . . . . . . . . . . . . . . . .521 䡵 ENGINE COMPARTMENT — 5.7L . . . . . . . . . .512 ▫ Maintenance-Free Battery . . . . . . . . . . . . . . .521 䡵 ONBOARD DIAGNOSTIC SYSTEM — OBD II . . .513 ▫ Air Conditioner Maintenance . . . . . . . . . . . . .523 䡵 EMISSIONS INSPECTION AND MAINTENANCE PROGRAMS . . . . . . . . . . . . . . . . . . . . . . . . . .513 ▫ A/C Air Filter . . . . . . . . . . .
510 MAINTAINING YOUR VEHICLE ▫ Automatic Transmission . . . . . . . . . . . . . . . .539 䡵 BULB REPLACEMENT . . . . . . . . . . . . . . . . . .561 ▫ All Wheel Drive (AWD) — If Equipped . . . . .541 ▫ Low Beam And High Beam Headlamp . . . . . .562 ▫ Rear Axle . . . . . . . . . . . . . . . . . . . . . . . . . . .541 ▫ Front Turn Signal Lamps . . . . . . . . . . . . . . . .563 ▫ Appearance Care And Protection From Corrosion . . . . . . . . . . . . . . . . . . . . . . . . . . .
MAINTAINING YOUR VEHICLE 511 ENGINE COMPARTMENT — 3.
512 MAINTAINING YOUR VEHICLE ENGINE COMPARTMENT — 5.
MAINTAINING YOUR VEHICLE 513 ONBOARD DIAGNOSTIC SYSTEM — OBD II Your vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems. When these systems are operating properly, your vehicle will provide excellent performance and fuel economy, as well as engine emissions well within current government regulations.
514 MAINTAINING YOUR VEHICLE Indicator Light (MIL)” is functioning and is not on when 2. As soon as you cycle the ignition switch to the ON the engine is running, and that the OBD II system is position, you will see the MIL symbol come on as part ready for testing. of a normal bulb check. Normally, the OBD II system will be ready. The OBD II 3.
MAINTAINING YOUR VEHICLE 515 you may need to do nothing more than drive your vehicle as you normally would in order for your OBD II system to update. A recheck with the above test routine may then indicate that the system is now ready. DEALER SERVICE Your authorized dealer has the qualified service personnel, special tools, and equipment to perform all service operations in an expert manner.
516 MAINTAINING YOUR VEHICLE MAINTENANCE PROCEDURES CAUTION! (Continued) The pages that follow contain the required maintenance services determined by the engineers who designed your vehicle. Besides those maintenance items specified in the fixed “Maintenance Schedule”, there are other components which may require servicing or replacement in the future.
MAINTAINING YOUR VEHICLE 517 Checking Oil Level — 5.7L Engine Engine Oil To assure proper engine lubrication, the engine oil must be maintained at the correct level. Check the oil level at To assure proper engine lubrication, the engine oil must regular intervals, such as every fuel stop. The best time to be maintained at the correct level. Check the oil level at check the engine oil level is about five minutes after a regular intervals, such as every fuel stop.
518 MAINTAINING YOUR VEHICLE Change Engine Oil American Petroleum Institute (API) Engine Oil The oil change indicator system will remind you that it is Identification Symbol time to take your vehicle in for scheduled maintenance. This symbol means that the oil has Refer to the “Maintenance Schedule” for further informabeen certified by the American tion. Petroleum Institute (API).
MAINTAINING YOUR VEHICLE 519 Engine Oil Viscosity — 3.6L Engine Engine Oil Viscosity — 5.7L Engine MOPAR® SAE 5W-20 engine oil approved to Chrysler Material Standard MS-6395 such as Pennzoil®, Shell Helix® or equivalent is recommended for all operating temperatures. This engine oil improves low temperature starting and vehicle fuel economy. MOPAR® SAE 5W-20 engine oil or equivalent such as Pennzoil® or Shell Helix® is recommended for all operating temperatures.
520 MAINTAINING YOUR VEHICLE Lubricants that do not have both, the engine oil certifi- indiscriminately discarded, can present a problem to the cation mark and the correct SAE viscosity grade number environment. Contact your authorized dealer, service station or governmental agency for advice on how and should not be used. where used oil and oil filters can be safely discarded in Synthetic Engine Oils your area.
MAINTAINING YOUR VEHICLE 521 Engine Air Cleaner Filter Engine Air Cleaner Filter Selection Refer to the “Maintenance Schedule” for the proper The quality of replacement engine air cleaner filters maintenance intervals. varies considerably. Only high quality filters should be used to assure most efficient service. MOPAR® engine air cleaner filters are a high quality filter and are recomWARNING! mended. The air induction system (air cleaner, hoses, etc.
522 MAINTAINING YOUR VEHICLE WARNING! Battery Location • Battery fluid is a corrosive acid solution and can burn or even blind you. Do not allow battery fluid to contact your eyes, skin, or clothing. Do not lean over a battery when attaching clamps. If acid splashes in eyes or on skin, flush the area immediately with large amounts of water. • Battery gas is flammable and explosive. Keep flame or sparks away from the battery.
MAINTAINING YOUR VEHICLE 523 CAUTION! • It is essential when replacing the cables on the battery that the positive cable is attached to the positive post and the negative cable is attached to the negative post. Battery posts are marked positive (+) and negative (-) and are identified on the battery case. Cable clamps should be tight on the terminal posts and free of corrosion.
524 MAINTAINING YOUR VEHICLE CAUTION! Do not use chemical flushes in your air conditioning system as the chemicals can damage your air conditioning components. Such damage is not covered by the New Vehicle Limited Warranty. Refrigerant Recovery And Recycling R134a — If Equipped R-134a Air Conditioning Refrigerant is a hydrofluorocarbon (HFC) that is endorsed by the Environmental Protection Agency and is an ozone-saving product.
MAINTAINING YOUR VEHICLE 525 1. Remove the access door in the cowl screen by pressing the retaining clips. Filter Access Cover 3. Remove the used filter. Access Door 2. Unsnap both ends and lift the filter access cover. 4. Install the new filter with arrows pointing in the direction of airflow, which is toward the rear of the vehicle (text and arrows on the filter will indicate this).
526 MAINTAINING YOUR VEHICLE Body Lubrication A/C Air Filter 5. Close the filter access cover. Locks and all body pivot points, including such items as seat tracks, door hinge pivot points and rollers, liftgate, tailgate, decklid, sliding doors and hood hinges, should be lubricated periodically with a lithium based grease, such as MOPAR® Spray White Lube to assure quiet, easy operation and to protect against rust and wear.
MAINTAINING YOUR VEHICLE 527 Windshield Wiper Blades Adding Washer Fluid Clean the rubber edges of the wiper blades and the windshield periodically with a sponge or soft cloth and a mild nonabrasive cleaner. This will remove accumulations of salt or road film. The windshield washer fluid reservoir is located in the front of the engine compartment. Be sure to check the fluid level at regular intervals.
528 MAINTAINING YOUR VEHICLE WARNING! Commercially available windshield washer solvents are flammable. They could ignite and burn you. Care must be exercised when filling or working around the washer solution. Exhaust System The best protection against carbon monoxide entry into the vehicle body is a properly maintained engine exhaust system.
MAINTAINING YOUR VEHICLE 529 CAUTION! • The catalytic converter requires the use of unleaded fuel only. Leaded gasoline will destroy the effectiveness of the catalyst as an emissions control device and may seriously reduce engine performance and cause serious damage to the engine. • Damage to the catalytic converter can result if your vehicle is not kept in proper operating condition.
530 MAINTAINING YOUR VEHICLE To minimize the possibility of catalytic converter dam- Cooling System age: • Do not shut off the engine or interrupt the ignition, when the transmission is in gear and the vehicle is in motion. • Do not try to start the engine by pushing or towing the vehicle. • Do not idle the engine with any spark plug wires disconnected or removed, such as when diagnostic testing, or for prolonged periods during very rough idle or malfunctioning operating conditions.
MAINTAINING YOUR VEHICLE 531 engine coolant (antifreeze) from the radiator drain cock. If the cap is sealing properly, the engine coolant (antiCheck engine coolant (antifreeze) protection every 12 freeze) will begin to drain from the coolant recovery months (before the onset of freezing weather, where bottle. DO NOT REMOVE THE COOLANT PRESSURE applicable). If the engine coolant (antifreeze) is dirty, the CAP WHEN THE COOLING SYSTEM IS HOT.
532 MAINTAINING YOUR VEHICLE Selection Of Coolant CAUTION! (Continued) Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Your Vehicle” for further information. CAUTION! • Mixing of engine coolant (antifreeze) other than specified Organic Additive Technology (OAT) engine coolant (antifreeze), may result in engine damage and may decrease corrosion protection.
MAINTAINING YOUR VEHICLE 533 Adding Coolant • Mix a minimum solution of 50% OAT engine coolant that meets the requirements of Chrysler Material Standard MS-12106 and distilled water. Use higher concentrations (not to exceed 70%) if temperatures below −34° F (−37° C) are anticipated. Your vehicle has been built with an improved engine coolant (OAT coolant conforming to MS-12106) that allows extended maintenance intervals.
534 MAINTAINING YOUR VEHICLE NOTE: • Some vehicles require special tools to add coolant properly. Failure to fill these systems properly could lead to severe internal engine damage. If any coolant is needed to be added to the system please contact your local authorized dealer. • Mixing engine coolant (antifreeze) types is not recommended and can result in cooling system damage.
MAINTAINING YOUR VEHICLE 535 with your local authorities to determine the disposal rules for your community. To prevent ingestion by animals or children, do not store ethylene glycol-based engine coolant in open containers or allow it to remain in puddles on the ground. If ingested by a child or pet, seek emergency assistance immediately. Clean up any ground spills immediately. Coolant Level The coolant bottle provides a quick visual method for determining that the coolant level is adequate.
536 MAINTAINING YOUR VEHICLE If an examination of your engine compartment shows no • Make sure that the coolant expansion bottle overflow hoses are not kinked or obstructed. evidence of radiator or hose leaks, the vehicle may be safely driven. The vapor will soon dissipate. • Keep the front of the radiator clean. If your vehicle is • Do not overfill the coolant expansion bottle. equipped with air conditioning, keep the front of the condenser clean.
MAINTAINING YOUR VEHICLE 537 WARNING! Riding the brakes can lead to brake failure and possibly a collision. Driving with your foot resting or riding on the brake pedal can result in abnormally high brake temperatures, excessive lining wear, and possible brake damage. You would not have your full braking capacity in an emergency. Clean the top of the master cylinder area before removing the cap. Add fluid to bring the level up to the top of the “FULL” mark on the side of the master cylinder reservoir.
538 MAINTAINING YOUR VEHICLE WARNING! WARNING! (Continued) • Use only manufacturer’s recommended brake fluid. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Your Vehicle” for further information. Using the wrong type of brake fluid can severely damage your brake system and/or impair its performance. The proper type of brake fluid for your vehicle is also identified on the original factory installed hydraulic master cylinder reservoir.
MAINTAINING YOUR VEHICLE 539 WARNING! (Continued) • Do not allow petroleum based fluid to contaminate the brake fluid. Brake seal components could be damaged, causing partial or complete brake failure. This could result in a collision. Use only brake fluid that has been in a tightly closed container to avoid contamination from foreign matter or moisture. Automatic Transmission Selection Of Lubricant recommended fluid.
540 MAINTAINING YOUR VEHICLE Automatic Transmission Fluid (ATF) is an engineered product and its performance may be impaired by supplemental additives. Therefore, do not add any fluid additives to the transmission. The only exception to this policy is the use of special dyes for diagnosing fluid leaks. Avoid using transmission sealers as they may adversely affect seals. CAUTION! Do not use chemical flushes in your transmission as the chemicals can damage your transmission components.
MAINTAINING YOUR VEHICLE 541 In addition, change the fluid and filter if the fluid case fluid level, remove the fill/inspection plug. The becomes contaminated (with water, etc.), or if the trans- fluid level should be even with the bottom of the hole. Use this plug to add fluid as required. mission is disassembled for any reason. The front differential fill plug is located on the outer cover near the halfshaft attachment.
542 MAINTAINING YOUR VEHICLE If gear oil leakage is suspected inspect the fluid level. Refer passable in snow and ice, and chemicals that are sprayed to “Fluids, Lubricants, and Genuine Parts” in “Maintaining on trees and road surfaces during other seasons, are highly corrosive to the metal in your vehicle. Outside Your Vehicle” for further information.
MAINTAINING YOUR VEHICLE 543 • Insects, tree sap and tar. • Salt in the air near seacoast localities. • Atmospheric fallout/industrial pollutants. Washing CAUTION! • Do not use abrasive or strong cleaning materials such as steel wool or scouring powder that will scratch metal and painted surfaces. • Use of power washers exceeding 1,200 psi (8 274 kPa) can result in damage or removal of paint and decals. • Wash your vehicle regularly.
544 MAINTAINING YOUR VEHICLE • If your vehicle is damaged due to a collision or similar • To remove heavy soil and/or excessive brake dust, use MOPAR® Wheel Cleaner. cause that destroys the paint and protective coating, have your vehicle repaired as soon as possible. The NOTE: If your vehicle is equipped with Dark Vapor cost of such repairs is considered the responsibility of Chrome wheels DO NOT USE wheel cleaners, abrasives the owner. or polishing compounds.
MAINTAINING YOUR VEHICLE 545 Stain Repel Fabric Cleaning Procedure — If Equipped Interior Care Use MOPAR® Total Clean to clean fabric upholstery and Stain Repel seats may be cleaned in the following man- carpeting. ner: Use MOPAR® Total Clean to clean vinyl upholstery. • Remove as much of the stain as possible by blotting MOPAR® Total Clean is specifically recommended for with a clean, dry towel. leather upholstery. • Blot any remaining stain with a clean, damp towel.
546 MAINTAINING YOUR VEHICLE WARNING! Do not use volatile solvents for cleaning purposes. Many are potentially flammable, and if used in closed areas they may cause respiratory harm. CAUTION! Do not use Alcohol and Alcohol-based and/or Keton based cleaning products to clean leather seats, as damage to the seat may result. To minimize the possibility of scratching the lenses and reducing light output, avoid wiping with a dry cloth. To remove road dirt, wash with a mild soap solution followed by rinsing.
MAINTAINING YOUR VEHICLE 547 When cleaning the rear view mirror, spray cleaner on the If the belts need cleaning, use MOPAR® Total Clean, a towel or rag that you are using. Do not spray cleaner mild soap solution, or lukewarm water. Do not remove the belts from the vehicle to wash them. Dry with a soft directly on the mirror. cloth.
548 MAINTAINING YOUR VEHICLE Cleaning The Center Console Cupholders Clean with a damp cloth or towel using a mild detergent with the cupholder in the center console. NOTE: The cupholder cannot be removed. FUSES WARNING! • When replacing a blown fuse, always use an appropriate replacement fuse with the same amp rating as the original fuse. Never replace a fuse with another fuse of higher amp rating. Never replace a blown fuse with metal wires or any other material.
MAINTAINING YOUR VEHICLE 549 CAUTION! Front Power Distribution Center Cavity 1 2 Cartridge Fuse – 40 Amp Green • When installing the power distribution center cover, it is important to ensure the cover is properly positioned and fully latched. Failure to do so may allow water to get into the power distribution center and possibly result in an electrical system failure. • When replacing a blown fuse, it is important to use only a fuse having the correct amperage rating.
550 MAINTAINING YOUR VEHICLE Cavity 3 4 5 6 7 8 9 10 11 12 13 14 15 16 18 Cartridge Fuse 50 Amp Red 30 Amp Pink 40 Amp Green 25 Amp Natural – – – – – – – – – – 50 Amp Red Mini-Fuse – – – – – – 20 Amp Yellow 5 Amp Tan 20 Amp Yellow 10 Amp Red – – – – – Description Power Steering #1 Starter Anti-Lock Brakes Anti-Lock Brakes Fuse – Spare Fuse – Spare All-Wheel Drive Module – If Equipped Security Horns Air Conditioning Clutch Fuse – Spare Fuse – Spare Fuse – Spare Fuse – Spare Radiator Fan #2
MAINTAINING YOUR VEHICLE 551 Cavity 19 20 21 22 23 24 28 29 30 31 32 33 34 35 36 Cartridge Fuse 50 Amp Red 30 Amp Pink 30 Amp Pink – – – – – – – – – – – – Mini-Fuse – – – – – – 25 Amp Natural 15 Amp Blue – 25 Amp Natural – – 25 Amp Natural 20 Amp Yellow 10 Amp Red Description Power Steering #2 Wiper Motor Headlamp Washers Fuse – Spare Fuse – Spare Fuse – Spare Fuel Pump Transmission Shifter Fuse – Spare Engine Module Fuse – Spare Fuse – Spare Powertrain #1 Powertrain #2 Anti-Lock Brake Module 7
552 MAINTAINING YOUR VEHICLE Cavity 37 38 39 48 49 50 51 52 53 Cartridge Fuse – – – – – – – – – Mini-Fuse 10 Amp Red 10 Amp Red 10 Amp Red 10 Amp Red – – 20 Amp Yellow – – Description Engine Controller/Rad Fan Relays Airbag Module Power Steering Module/AC Clutch Relay AWD Module/Front Axle Disconnect Fuse – Spare Fuse – Spare Vacuum Pump Fuse – Spare Fuse – Spare
MAINTAINING YOUR VEHICLE 553 Rear Power Distribution Center (Fuses) There is also a power distribution center located in the trunk under the spare tire access panel. This center contains fuses and relays. Rear Power Distribution Center 7 CAUTION! Opening The Access Cover • When installing the power distribution center cover, it is important to ensure the cover is properly positioned and fully latched.
554 MAINTAINING YOUR VEHICLE CAUTION! (Continued) water to get into the power distribution center and possibly result in an electrical system failure. • When replacing a blown fuse, it is important to use only a fuse having the correct amperage rating. The use of a fuse with a rating other than indicated may result in a dangerous electrical system overload. If a properly rated fuse continues to blow, it indicates a problem in the circuit that must be corrected.
MAINTAINING YOUR VEHICLE 555 Cavity 7 8 Cartridge Fuse 40 Amp Green 30 Amp Pink Mini-Fuse — — 9 10 11 12 30 Amp Pink 30 Amp Pink 30 Amp Pink — — — — 20 Amp Yellow 15 16 17 18 19 20 40 Amp Green — — — — — — — — — — — Description Exterior Lighting #2 Interior Lighting/Washer Pump Power Locks Driver Door Passenger Door Cigar Lighters, Instrument Panel & Power Outlet Console Rear HVAC Blower Fuse — Spare Fuse — Spare Fuse — Spare Fuse — Spare Fuse — Spare 7
556 MAINTAINING YOUR VEHICLE Cavity 21 22 23 Cartridge Fuse — — — Mini-Fuse — — 10 Amp Red 24 25 26 27 31 32 33 — — — — — — — 15 Amp Blue 10 Amp Red — 25 Amp Natural 25 Amp Natural 15 Amp Blue 15 Amp Blue 34 — 10 Amp Red 35 — 10 Amp Red Description Fuse — Spare Fuse — Spare Fuel Door/Diagnostic Port Radio Screen Tire Pressure Monitor Fuse — Spare Amplifier Power Seats HVAC Module/Cluster Ignition Switch/Wireless Module Steering Column Module/Clock Battery Sensor
MAINTAINING YOUR VEHICLE 557 Cavity 36 37 38 Cartridge Fuse — — — Mini-Fuse — 15 Amp Blue 20 Amp Yellow 40 41 42 43 — — 30 Amp Pink — — — — 25 Amp Natural 44 — 10 Amp Red 45 — 15 Amp Blue 46 47 — — 10 Amp Red 10 Amp Red Description Fuse — Spare Radio Power Outlet Inside Arm Rest Fuse — Spare Fuse — Spare Rear Defrost Rear Heated Seats/ Steering Wheel Park Assist/Blind Spot/ Camera Cluster/Rearview Mirror/Compass Adaptive Cruise Control Adaptive Front Lighting 7
558 MAINTAINING YOUR VEHICLE Cavity 48 49 50 51 52 Cartridge Fuse — — — — — Mini-Fuse 20 Amp Yellow — — 20 Amp Yellow 10 Amp Red 53 — 10 Amp Red 54 55 56 57 58 59 60 — — — — — — — — — — — 10 Amp Red — — Description Active Suspension Fuse — Spare Fuse — Spare Front Heated Seats Heated Cupholders/Rear Heated Seat Switches HVAC Module/In Car Temperature Sensor Fuse — Spare Fuse — Spare Fuse — Spare Fuse — Spare Airbag Module Fuse — Spare Fuse — Spare
MAINTAINING YOUR VEHICLE 559 Cavity 61 62 63 64 65 66 67 68 Cartridge Fuse — — — — — — — — Mini-Fuse — — — 25 Amp Natural 10 Amp Red — 15 Amp Blue 15 Amp Blue 69 70 — — — — Description Fuse — Spare Fuse — Spare Fuse — Spare Rear Windows Airbag Module Fuse — Spare Run Sense Illumination/Rear Sunshade Fuse — Spare Fuse — Spare 7
560 MAINTAINING YOUR VEHICLE VEHICLE STORAGE If you are leaving your vehicle dormant for more than 21 days, you may want to take these steps to protect your battery. • Disconnect the negative cable from the battery. • Anytime you store your vehicle, or keep it out of service (e.g., vacation) for two weeks or more, run the air conditioning system at idle for about five minutes in the fresh air and high blower setting.
MAINTAINING YOUR VEHICLE 561 Exterior Bulbs Low Beam/High Beam (Bi-Halogen Headlamp) Low Beam/High Beam (Bi-Xenon Headlamp) Front Turn Signal Lamp Front Park Lamp Daytime Running Lamp Front Fog Lamp – If Equipped Front Sidemarker Lamp Rear Tail/Stop/Turn Lamp Bulb Number HIR2LL D3S (Serviced at Authorized Dealer) PSY24WSV LED (Serviced at Authorized Dealer) LED (Serviced at Authorized Dealer) H11 LED (Serviced at Authorized Dealer) LED (Serviced at Authorized Dealer) Rear Sidemarker Lamp Backup Lamp Cent
562 MAINTAINING YOUR VEHICLE Low Beam And High Beam Headlamp High Intensity Discharge Headlamps (HID) — If Equipped The headlamps are a type of high voltage discharge tube. High voltage can remain in the circuit even with the headlamp switch off and the ignition turned to the OFF position. Because of this, you should not attempt to service a headlamp bulb yourself. If a headlamp bulb fails, take your vehicle to an authorized dealer for service.
MAINTAINING YOUR VEHICLE 563 5. Disconnect the bulb from the wiring assembly and NOTE: Removal of the air cleaner filter housing may be install the replacement bulb. necessary prior to replacing bulbs in the headlamp assembly on the driver side of the vehicle. 6. Reinstall the bulb and wiring assembly into the headlamp assembly, and then turn it clockwise. 2. Reach behind the headlamp housing to access the turn signal (inboard) bulb cap. 7.
564 MAINTAINING YOUR VEHICLE Rear Backup Lamp And Turn Signal Lamps 1. Open the trunk. 9. Turn the appropriate bulb and socket assembly counterclockwise to remove it from the tail lamp assembly. 10. Disconnect the bulb from the socket assembly and 2. Remove the trunk trim by removing the grocery hook install the replacement bulb. (using a T-20 torque driver or similar tool), remove the fastener, and pull back the weather strip. 11.
MAINTAINING YOUR VEHICLE 565 4. Reinstall the bulb and socket assembly. 5. Reattach the lamp to the rear fascia, and then install the screws.
566 MAINTAINING YOUR VEHICLE FLUID CAPACITIES U.S. Fuel (Approximate) All Engines 19 Gallons Engine Oil With Filter 3.6 Liter Engine (SAE 5W-20, API Certified) 6 Quarts 5.7 Liter Engine (SAE 5W-20, API Certified) 7 Quarts Cooling System * 3.6 Liter Engine – We recommend you use MOPAR® Antifreeze/ 10 Quarts Engine Coolant 10 Year/150,000 Mile Formula or equivalent. 5.7 Liter Engine without Severe Duty II Cooling System – We rec14.
MAINTAINING YOUR VEHICLE 567 FLUIDS, LUBRICANTS AND GENUINE PARTS Engine Component Engine Coolant Engine Oil – 3.6L Engine Fluid, Lubricant, or Genuine Part We recommend you use MOPAR® Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology). We recommend you use API Certified SAE 5W-20 Engine Oil, meeting the requirements of Chrysler Material Standard MS-6395 such as MOPAR®, Pennzoil®, and Shell Helix®. Refer to your engine oil filler cap for correct SAE grade.
568 MAINTAINING YOUR VEHICLE Component Engine Oil – 5.7L Engine Engine Oil Filter Spark Plugs – 3.6L Engine Spark Plugs – 5.7L Engine Fuel Selection – 3.6L Engine Fuel Selection – 5.7L Engine Fluid, Lubricant, or Genuine Part We recommend you use API Certified SAE 5W-20 Engine Oil, meeting the requirements of Chrysler Material Standard MS-6395 such as MOPAR®, Pennzoil®, and Shell Helix®. Refer to your engine oil filler cap for correct SAE grade. MOPAR® Engine Oil Filter or equivalent.
MAINTAINING YOUR VEHICLE 569 Chassis Component Automatic Transmission – 8-Speed Transmission Automatic Transmission – 5-Speed Transmission Brake Master Cylinder Power Steering Reservoir Front Axle Rear Axle Transfer Case Fluid, Lubricant, Or Genuine Part Use only MOPAR® ZF 8&9 Speed ATF™ Automatic Transmission Fluid, or equivalent. Failure to use the correct fluid may affect the function or performance of your transmission. Use only ATF+4® Automatic Transmission Fluid.
M A I N T E N A ▫ Maintenance Chart. . . . . . . . . . . . . . . . . . . . .574 N C E MAINTENANCE SCHEDULES CONTENTS 䡵 MAINTENANCE SCHEDULE . . . . . . . . . . . . .
M A I N T E N A N C E S C H E D U L E S 8 572 MAINTENANCE SCHEDULES On Electronic Vehicle Information Center (EVIC) equipped vehicles, “Oil Change Required” will be disYour vehicle is equipped with an automatic oil change played in the EVIC and a single chime will sound, indicator system. The oil change indicator system will indicating that an oil change is necessary. remind you that it is time to take your vehicle in for scheduled maintenance.
MAINTENANCE SCHEDULES 573 M Severe Duty All Models Change Engine Oil at 4000 miles (6,500 km) if the vehicle is operated in a dusty and off road environment. This type of vehicle use is considered Severe Duty Once A Month Or Before A Long Trip: • Check engine oil level • Check windshield washer fluid level • Check tire pressure and look for unusual wear or damage. Rotate tires at the first sign of irregular wear, even if it occurs before your next scheduled service.
8 Additional Inspections Inspect the CV joints. Inspect front suspension, tie rod ends, boot seals, and replace if necessary. Inspect the rear axle fluid. Inspect the front axle fluid (All Wheel Drive Only). Inspect the brake linings, replace as necessary. Adjust park brake on vehicles equipped with four wheel disc brakes.
Inspect transfer case fluid (All Wheel Drive Only). Inspect the transfer case fluid. Change the transfer case fluid; if using your vehicle for any of the following: police, taxi, fleet, off-road, or frequent trailer towing. (All Wheel Drive Only). Additional Maintenance Replace engine air filter. Replace cabin/air conditioning filter. Replace spark plugs (3.6L engine).** Replace spark plugs (5.7L engine).
S C H E D U L E S 8 Flush and replace the engine coolant at 10 years or 150,000 miles (240,000 km) whichever comes first. Change automatic transmission fluid and filter if using your vehicle for any of the following: police, taxi, fleet, off-road, or frequent trailer towing (five-speed only). Change automatic transmission fluid and filter (five-speed only).
30,000 40,000 50,000 60,000 70,000 80,000 90,000 100,000 110,000 120,000 130,000 140,000 150,000 2 3 4 5 6 7 8 9 10 11 12 13 14 15 48,000 64,000 80,000 96,000 112,000 128,000 144,000 160,000 176,000 192,000 208,000 224,000 240,000 Or Years: Or Kilometers: 20,000 Mileage or time passed (whichever comes first) 32,000 MAINTENANCE SCHEDULES 577 M Change the rear axle fluid and on models equipped with All Wheel Drive (AWD) change the front axle fluid if using your veh
M 578 MAINTENANCE SCHEDULES A I WARNING! N T E • You can be badly injured working on or around a motor vehicle. Do only service work for which you N A have the knowledge and the right equipment. If N you have any doubt about your ability to perform a C service job, take your vehicle to a competent meE S C H E D U L E S 8 chanic. • Failure to properly inspect and maintain your vehicle could result in a component malfunction and effect vehicle handling and performance. This could cause an accident.
IF YOU NEED CONSUMER ASSISTANCE CONTENTS 䡵 SUGGESTIONS FOR OBTAINING SERVICE FOR YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . .581 ▫ Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY). . . . . . . . . . . . . . . . . . .583 ▫ Prepare For The Appointment. . . . . . . . . . . . .581 ▫ Service Contract . . . . . . . . . . . . . . . . . . . . . .583 ▫ Prepare A List . . . . . . . . . . . . . . . . . . . . . . . .581 䡵 WARRANTY INFORMATION . . . . . . . . . . . . .
580 IF YOU NEED CONSUMER ASSISTANCE 䡵 DEPARTMENT OF TRANSPORTATION UNIFORM TIRE QUALITY GRADES . . . . . . . . . . . . . . . . .587 ▫ Treadwear. . . . . . . . . . . . . . . . . . . . . . . . . . .587 ▫ Traction Grades . . . . . . . . . . . . . . . . . . . . . . .587 ▫ Temperature Grades. . . . . . . . . . . . . . . . . . . .
IF YOU NEED CONSUMER ASSISTANCE 581 SUGGESTIONS FOR OBTAINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment Be Reasonable With Requests If you list a number of items and you must have your vehicle by the end of the day, discuss the situation with the service advisor and list the items in order of priority. At many authorized dealers, you may obtain a rental vehicle at a minimal daily charge. If you need a rental, it is advisable to make these arrangements when you call for an appointment.
582 IF YOU NEED CONSUMER ASSISTANCE facilities, factory-trained technicians, special tools, and • Authorized dealer name the latest information to ensure the vehicle is fixed • Vehicle Identification Number (VIN) correctly and in a timely manner. • Vehicle delivery date and mileage This is why you should always talk to an authorized dealer service manager first. Most matters can be re- Chrysler Group LLC Customer Center solved with this process. P.O.
IF YOU NEED CONSUMER ASSISTANCE 583 Mexico, D. F. Canadian residents with hearing difficulties that require assistance can use the special needs relay service offered by Bell Canada. For TTY teletypewriter users, dial 711 and for Voice callers, dial 1-800-855-0511 to connect with a Bell Relay Service operator.
584 IF YOU NEED CONSUMER ASSISTANCE The manufacturer will not stand behind any service contract that is not the manufacturer’s service contract. It is not responsible for any service contract other than the manufacturer’s service contract. If you purchased a service contract that is not a manufacturer’s service contract, and you require service after the manufacturer’s New Vehicle Limited Warranty expires, please refer to the contract documents, and contact the person listed in those documents.
IF YOU NEED CONSUMER ASSISTANCE 585 campaign. However, NHTSA cannot become involved in individual problems between you, your authorized MOPAR® fluids, lubricants, parts, and accessories are dealer, and the manufacturer. available from an authorized dealer. They are recommended for your vehicle in order to help keep the vehicle To contact NHTSA, you may either call the Auto Safety Hotline toll free at 1–888–327–4236 (TTY: 1–800–424– 9153), operating at its best. or go to http://www.safercar.
586 IF YOU NEED CONSUMER ASSISTANCE PUBLICATION ORDER FORMS To order the following manuals, you may use either the website or the phone numbers listed below. Visa, Mastercard, American Express, and Discover orders are accepted. If you prefer mailing your payment, please call for an order form. Diagnostic Procedure Manuals Diagnostic Procedure Manuals are filled with diagrams, charts and detailed illustrations.
IF YOU NEED CONSUMER ASSISTANCE 587 Call toll free at: Treadwear • 1–800–890–4038 (U.S.) The Treadwear grade is a comparative rating, based on the wear rate of the tire when tested under controlled conditions on a specified government test course. For example, a tire graded 150 would wear one and one-half times as well on the government course as a tire graded 100.
588 IF YOU NEED CONSUMER ASSISTANCE WARNING! The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning, or peak traction characteristics. Temperature Grades The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat and its ability to dissipate heat, when tested under controlled conditions on a specified indoor laboratory test wheel.
INDEX 10
590 INDEX About Your Brakes . . . . . . . . . . . . . . . . . . . . . . . .400 ABS (Anti-Lock Brake System) . . . . . . . . . . . . . . . .403 Adaptive Cruise Control (ACC) (Cruise Control) . . .220 Adding Engine Coolant (Antifreeze) . . . . . . . . . . . .533 Adding Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . .459 Adding Washer Fluid . . . . . . . . . . . . . . . . . . . . . .527 Additives, Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . .454 Adjustable Pedals . . . . . . . . . .
INDEX 591 Keyless Transmitter Replacement (RKE) . . . . . . . .25 Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .521 Remote Battery Replacement . . . . . . . . . . . . . . . .25 Transmitter Battery Replacement . . . . . . . . . . . . .25 Belts, Seat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49 Bluetooth® Connecting To A Particular Mobile Phone Or Audio Device After Pairing . . . . . . . . . . . . . . . . . . . . .
592 INDEX Fluid Check . . . . . . . . . . . Master Cylinder . . . . . . . . Parking . . . . . . . . . . . . . . Warning Light . . . . . . . . . Brake/Transmission Interlock . Brightness, Interior Lights . . . Bulb Replacement . . . . . . . . . Bulbs, Light . . . . . . . . . . . . . . . . . . . . . Camera, Rear . . . . . . . . . . . . Capacities, Fluid . . . . . . . . . . Caps, Filler Oil (Engine) . . . . . . . . . . . Radiator (Coolant Pressure) Carbon Monoxide Warning . . Cargo Area Features . . . . . .
INDEX 593 Climate Control . . . . . . . . . . . . . . . . Clock . . . . . . . . . . . . . . . . . . . . . . . . Coin Holder . . . . . . . . . . . . . . . . . . . Cold Weather Operation . . . . . . . . . . Compact Disc (CD) Maintenance . . . . Compact Spare Tire . . . . . . . . . . . . . . Computer, Trip/Travel. . . . . . . . . . . . Connector UCI . . . . . . . . . . . . . . . . . . . . . . . Universal Consumer Interface (UCI) Conserving Fuel . . . . . . . . . . . . . . . . Console, Floor . . . . . . . . .
594 INDEX Defroster, Windshield . . . . . . . . . . . . . . . . . . . . . .101 Delay (Intermittent) Wipers . . . . . . . . . . . . . . . . . .206 Diagnostic System, Onboard . . . . . . . . . . . . . . . . .513 Dimmer Switch, Headlight. . . . . . . . . . . . . . . . . . .201 Dipsticks Oil (Engine) . . . . . . . . . . . . . . . . . . . . . . . . . . .517 Disabled Vehicle Towing . . . . . . . . . . . . . . . . . . . .504 Disposal Antifreeze (Engine Coolant) . . . . . . . . . . . . . . . .
INDEX 595 Electronic Vehicle Information Center (EVIC) . . . .313 Electronic Vehicle Information Center (EVIC) Setup Menu . . . . . . . . . . . . . . . . . . . . . . . . . . .313 EVIC Display . . . . . . . . . . . . . . . . . . . . . . . . . .316 EVIC Messages . . . . . . . . . . . . . . . . . . . . . . . . .313 Remote Start . . . . . . . . . . . . . . . . . . . . . . . . . . .29 Emergency Deck Lid Release . . . . . . . . . . . . . . . . . .44 Emergency, In Case of Freeing Vehicle When Stuck . . . . . . .
596 INDEX Engine Oil Viscosity . . . . . . . . . . . . . . . . . . . . . . .519 Flashers Engine Oil Viscosity Chart . . . . . . . . . . . . . . . . . . .519 Hazard Warning . . . . . . Turn Signal . . . . . . . . . Enhanced Accident Response Feature . . . . . . . . . . . .70 Entry System, Illuminated . . . . . . . . . . . . . . . . . . . .21 Flash-To-Pass . . . . . . . . . . Ethanol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .452 Flexible Fuel Vehicles Event Data Recorder . . . . . . . .
INDEX 597 Cooling System . . . . . . . . . . . . . . Engine Oil . . . . . . . . . . . . . . . . . Transfer Case . . . . . . . . . . . . . . . Fluids, Lubricants and Genuine Parts Fog Lights . . . . . . . . . . . . . . . . . . . Folding Rear Seat . . . . . . . . . . . . . . Forward Collision Warning . . . . . . . Freeing A Stuck Vehicle . . . . . . . . . . Fuel . . . . . . . . . . . . . . . . . . . . . . . . Additives . . . . . . . . . . . . . . . . . . Clean Air . . . . . . . . . . . . . . . . . .
598 INDEX Tachometer . . . . . . . . . . . Gear Ranges . . . . . . . . . . . . Gear Select Lever Override . General Information . . . . . . Glass Cleaning . . . . . . . . . . Gross Axle Weight Rating . . Gross Vehicle Weight Rating. GVWR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INDEX 599 Key Fob. . . . . . . . . . . . . . . . . . . . . . . . Arm The Alarm . . . . . . . . . . . . . . . . Lock The Doors . . . . . . . . . . . . . . . . Panic Alarm . . . . . . . . . . . . . . . . . . . Programming Additional Key Fobs . . Programming Additional Transmitters Remote Battery Replacement . . . . . . . Unlatch The Trunk . . . . . . . . . . . . . . Unlock The Doors . . . . . . . . . . . . . . Key-In Reminder . . . . . . . . . . . . . . . . . Keyless Enter-N-Go . . . . . . . . . . . . . . .
600 INDEX Keyless Entry System . . . Keyless Go. . . . . . . . . . . Key, Replacement . . . . . . Keys . . . . . . . . . . . . . . . Key, Sentry (Immobilizer) Knee Bolster. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 .12 .17 .12 .16 .59 Lane Change and Turn Signals . . . . . . . . .
INDEX 601 Illuminated Entry . . . . . . . . . . . . . . . . . . . . . . . .21 Instrument Cluster . . . . . . . . . . . . . . . . . . . . . .194 Intensity Control . . . . . . . . . . . . . . . . . . . . . . . .204 Interior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .203 License . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .564 Lights On Reminder . . . . . . . . . . . . . . . . . . . . .198 Low Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
602 INDEX Malfunction Indicator Light (Check Engine). . . . . . .307 Manual, Service . . . . . . . . . . . . . . . . . . . . . . . . . .586 Master Cylinder (Brakes) . . . . . . . . . . . . . . . . . . . .537 Memory Feature (Memory Seat) . . . . . . . . . . . . . . .188 Memory Seat . . . . . . . . . . . . . . . . . . . . . . . . . . . .188 Memory Seats and Radio . . . . . . . . . . . . . . . . . . . .188 Methanol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .452 Mini-Trip Computer . . . . . .
INDEX 603 ParkSense® System, Rear. . . . . . . . . . . . . . . . . . . .248 Passing Light . . . . . . . . . . . . . . . . . . . . . . . . . . . .201 Passive Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34 Pedals, Adjustable. . . . . . . . . . . . . . . . . . . . . . . . .214 Pets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98 Pets, Transporting. . . . . . . . . . . . . . . . . . . . . . . . . .98 Phone (Pairing). . . . . . . . . . . . . . . . . . . . . . . . . .
604 INDEX Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39 Power Steering Fluid . . . . . . . . . . . . . . . . . . . . . . .569 Pregnant Women and Seat Belts . . . . . . . . . . . . . . . .58 Preparation for Jacking . . . . . . . . . . . . . . . . . . . . .487 Pretensioners Seat Belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57 Programming Transmitters (Remote Keyless Entry) . .22 Radial Ply Tires . . . . . . . . . . . . . . .
INDEX 605 Unlatch The Trunk . . . . . . . . . . . . . . . . . . . . . . .24 Unlock The Doors . . . . . . . . . . . . . . . . . . . . . . .23 Remote Sound System (Radio) Controls . . . . . . . . .348 Remote Starting EVIC Remote Start Abort Message . . . . . . . . . . . .28 Exit Remote Start Mode . . . . . . . . . . . . . . . . . . .29 How To Use Remote Start . . . . . . . . . . . . . . . . . .27 To Exit Remote Start Mode And Drive The Vehicle . .29 Uconnect® Customer Programmable Features . . .
606 INDEX Front Seat . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49 Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . .101 Operating Instructions . . . . . . . . . . . . . . . . . . . .50 Pretensioners . . . . . . . . . . . . . . . . . . . . . . . . . . .57 Rear Seat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49 Untwisting Procedure . . . . . . . . . . . . . . . . . . . . .54 Seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INDEX 607 Snow Chains (Tire Chains) . . . . . . . . . . . . . . . . . . .437 Snow Tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .430 Spare Tire. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .432 Spark Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . .567 Specifications Fuel (Gasoline) . . . . . . . . . . . . . . . . . . . . . . . . .567 Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .567 Speed Control (Cruise Control). . . . . . . . . . . .
608 INDEX Temperature Control, Automatic (ATC) . Temperature Gauge, Engine Coolant . . . Tilt Steering Column . . . . . . . . . . . . . . Time Delay, Headlight . . . . . . . . . . . . . Tire and Loading Information Placard . . Tire Markings . . . . . . . . . . . . . . . . . . . Tires . . . . . . . . . . . . . . . . . . . . . . . . . Aging (Life of Tires) . . . . . . . . . . . . Air Pressure . . . . . . . . . . . . . . . . . . Chains . . . . . . . . . . . . . . . . . . . . . . Changing . . . . . . . . . . .
INDEX 609 Weight . . . . . . . . . . . . . . . . . . . . Towing Vehicle Behind a Motorhome Traction . . . . . . . . . . . . . . . . . . . . . Traction Control . . . . . . . . . . . . . . . Trailer Towing . . . . . . . . . . . . . . . . Cooling System Tips . . . . . . . . . . Hitches . . . . . . . . . . . . . . . . . . . Minimum Requirements . . . . . . . Tips . . . . . . . . . . . . . . . . . . . . . . Trailer and Tongue Weight . . . . . . Wiring . . . . . . . . . . . . . . . . . . . .
610 INDEX Screen Activated Features . . . . . . . . . . . . . . . . .330 Things You Should Know About Your Uconnect® Phone . . . . . . . . . . . . . . . . . . . . . . .152 Uconnect® Settings . . . . . . . . . . . . . . . . . . . . . . .23 Uconnect® Phone . . . . . . . . . . . . . . . . . . . . . . . . .127 Uconnect® Settings Customer Programmable Features . . . . . . . . . . . .23 Customer Programmable Features . . . . . . . . . . . .34 Passive Entry Programming . . . . . . . . . . . . . . . . .
INDEX 611 Wind Buffeting. . . . . . . . . . . . . . . . . . . . . . . . . . . .42 Window Fogging . . . . . . . . . . . . . . . . . . . . . . . . .359 Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39 Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39 Reset Auto-Up . . . . . . . . . . . . . . . . . . . . . . . . . .41 Wind Buffeting . . . . . . . . . . . . . . . . . . . . . . . . . .42 Windshield Defroster. . . . . . . . . . . . . . . . . . . . . . .
INSTALLATION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this vehicle’s electronic system to provide immunity to radio frequency signals. Mobile two-way radios and telephone equipment must be installed properly by trained personnel. The following must be observed during installation. The positive power connection should be made directly to the battery and fused as close to the battery as possible.
2014 300 2014 OWNER’S MANUAL Chrysler Group LLC 14C481-126-AD Fourth Edition Printed in U.S.A.