Owner`s manual

• Broken, muddy, or obstructed headlights and taillights

of vehicles in the field of view will cause headlights to

remain on longer (closer to the vehicle). Also, dirt, film,

and other obstructions on the windshield or camera

lens will cause the system to function improperly.

If the windshield or Automatic High Beam Headlamp

Control mirror is replaced, the mirror must be re-aimed

to ensure proper performance. See your local authorized

dealer.

To Activate

1. Turn the headlight switch to the AUTO headlight

position.

2. Push the multifunction lever away from you (toward

front of vehicle) to engage the high beam mode.

NOTE: This system will not activate until the vehicle is

at or above 15 mph (35 km/h).

To Deactivate

1. Pull the multifunction lever toward you (or rearward

in car) to manually deactivate the system (normal

operation of low beams).

2. Push back on the multifunction lever once again to

reactivate the system.

Adaptive Bi-Xenon High Intensity Discharge

Headlights — If Equipped

This system automatically swivels the headlight beam

pattern horizontally to provide increased illumination in

the direction the vehicle is steering.

NOTE:

• Each time the Adaptive Headlight System is turned on,

the headlights will initialize by performing a brief

sequence of rotations.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 197