Owner`s manual

Clock Setting
There are two ways to enter the clock setting procedure
on the Uconnect® 5.0 system.
1. Press the More hard-key on the right side of the
display, next press the Time soft-key and then press
the Set soft-key. OR Press the More hard key on the
right side of the display, next press the Settings soft
key, then Clock and Date soft key, and then Set Time
and Date soft key. Select the up or down arrows as
appropriate. Select Done when complete.
NOTE: In the Clock Setting Menu you can also select
Display Clock. Display Clock turns the clock display in
the status bar on or off.
2. Touch the Up or Down arrows to adjust the hours or
minutes, next select the AM or PM soft-key. You can
also select 12hr or 24hr format by touching the desires
soft-key.
3. Once the time is set press the “Done” soft-key to exit
the time screen.
12 RADIO MODE