Owner`s manual

Inserting Auxiliary Device

Gently insert the Auxiliary device cable into the AUX

Port. If you insert a Auxiliary device with the ignition

ON, the unit will switch to AUX mode and begin to play

when you insert the device cable.

Controlling the Auxiliary Device

The control of the auxiliary device (e.g., selecting play-

lists, play, fast forward, etc.) cannot be provided by the

radio; use the device controls instead. Adjust the volume

with the VOLUME rotary knob, or with the volume of the

attached device.

The vehicle radio unit is acting as the amplifier for audio

output from the Auxiliary device. Therefore if the volume

control on the Auxiliary device is set too low, there will be

insufficient audio signal for the radio unit to play the

music on the device.

Bluetooth® Mode

Bluetooth® Streaming Audio (BTSA) or Bluetooth®

Mode is entered by pairing a Bluetooth® device, contain-

ing music, to the Uconnect® system.

Before proceeding, the Bluetooth® device needs to be

paired through Uconnect® Phone in order to communi-

cate with the Uconnect® system.

See the pairing procedure in this manual for further

details.

Once the Bluetooth® device is paired to the Uconnect®

system, touch the Media hard-key located on the left side

of the display. Once in Media Mode, touch the source

soft-key and select Bluetooth®.

NOTE: For mobile phone compatibility and pairing in-

structions, please visit www.UconnectPhone.com.

MEDIA MODE 17