User Manual

Remote Operation through a Tone Telephone

You can use many Answering System features when you are away from home. To protect your

privacy, most of the features can be used only after you enter the three-digit Remote Access

Code.

Remote Access Codes

The Remote Access Codes are preset at the factory as below. You can use the preset codes or

choose your own.

PRIMARY MAILBOX: 999

MAILBOX 1: 555

MAILBOX 2: 666

MAILBOX 3: 777

MAILBOX 4: 888

NOTE: If there is a power failure of the BASE UNIT, the Remote Access Codes return to the

factory preset codes.

Changing of the Remote Access Codes

All of the digits of the Remote Access Codes are a combination of the numbers 5, 6, 7, 8, 9, and

IMPORTANT: Digits 1, 2, 3, and 4 cannot be used when changing the Remote Access Codes

for any mailbox (including the PRIMARY MAILBOX).

1. Press a mailbox button for MAILBOX 1, 2, 3, or 4. For the PRIMARY MAILBOX, follow

steps 2 to 6.

2. Press and hold down the button until you hear the announcement, “Please

enter new password.”

3. Press and hold down the button. Release the button when you hear the desired first

digit of the code.

4. Press and hold down the button. Release the button when you hear the desired

second digit of the code.

5. Press and hold down the button. Release the button when you hear the desired

third digit of the code.

6. Press the button, the 3-digits you have selected will be announced.

7. If your new Remote Access Code is the same as that of another mailbox, the Answering

System will not record your password and will announce, “Please try again.”

CODE

MIN

PAGE

CODE

Remote Control Operation