User Manual

24. MAILBOX 2 Button: Press to activate functions for MAILBOX 2.
25. MAILBOX 1 Button: Press to activate functions for MAILBOX 1.
26. LED MESSAGE DISPLAY: Indicates the number of memos/messages received, status of
the system.
- Erase - OGM is playing ~ - No. of memos/messages
- Announce Only - Memory is full - Pause
27. CODE Button: Press to set the 3-digit Remote Access Code for remote operation.
28. SET Button: Press to set/check the day and time.
29. DAY/VOL Button: (DAY) Press to set the day during time setting, or press to set
the first digit of the access code during code setting. (VOL ) Press to higher the speaker
volume.
30. CHARGE TERMINALS: For charging the HANDSET BATTERY PACK. For best
performance, clean the CHARGE TERMINALS periodically with a damp cloth.
31. MAILBOX 3 Button: Press to activate functions for MAILBOX 3.
32. STOP Button: Press to stop playing a message. Press and hold down for more
than 3 seconds to initiate/re-initiate your answering machine, then release the button and
a “beep” will sound.(See detail operations on pages 30 and 43.)
33. PLAY Button: Press to play messages.
34. CHARGE LED Indicator: Lights up when the HANDSET is placed on the BASE UNIT for
charging.
35. SPEAKER Button: Press to awswer the incoming call in BASE UNIT.
36. MICROPHONE
SPEAKER
PLAY
STOP
3
SET
CODE
1
2
BASE UNIT Controls
25.MAILBOX 1 BUTTON Pg. 32,
34~37
24.MAILBOX 2 BUTTON Pg. 32,
34~37
35. PAGE BUTTON Pg. 13
31. MAILBOX 3 BUTTON
Pg. 32, 34~37
32. STOP BUTTON
Pg. 8, 30, 32, 35, 43
36. MICROPHONE Pg. 31, 34
28.SET BUTTON Pg. 30
27.CODE BUTTON Pg. 37
34. CHARGE LED INDICATOR
30.CHARGE TERMINALS
26.LED MESSAGE DISPLAY
Pg. 32~33, 35~36
29.DAY/VOL BUTTON
Pg. 13, 30, 32, 37, 43
33. PLAY BUTTON Pg. 34~35