User Manual

8. Install the HANDSET BATTERY PACK by
plugging it into the BATTERY CONNECTOR
inside the BATTERY COMPARTMENT. The
HANDSET LCD Screen will display “RING: HI”.
9. Place the BATTERY PACK inside the BATTERY
COMPARTMENT.
10. Slide the HANDSET BATTERY COMPARTMENT
COVER firmly into place in its closed position.
11. Place one HANDSET to cradle of BASE UNIT (Do
not charge the HANDSET with the KEYPAD
face down), and the other one to the CHARGER
UNIT.
12. IMPORTANT: Before initial use, charge the
HANDSET for 12 hours.
13. TONE/PULSE Select Switch:
A. If your home is equipped with a tone dialing
system, set the TONE/PULSE Select Switch
to the TONE position.
B. If you have a rotary dialing system, set the
TONE/PULSE Select Switch to the PULSE
position.
C. If you are unsure which system you have, set
the TONE/PULSE Select Switch to the TONE
position. Press the button on the
HANDSET to get a dial tone and make a call.
If the call connects, leave the switch as is;
otherwise set to the PULSE position.
TALK
7
Getting Started
RING: HI