Scanner User Manual

Wireless FuzzyScan
Reference Manual
Configure Your FuzzyScan
58
PROGRAM
Operation Control
♦
♦♦
♦ Batch Scanning Setting ♦
♦♦
♦
F_DEFAULT
Family Code Selection P.C Parameter Selection Option Code
Batch Scanning Link Control
SS
SS
Radio disable
Radio enable

0
1
Stored Data Transmission
SS
SS
SS
All
On cradle
Scan barcode

0
1
2
Delete Stored Data after
Transmission
SS
SS
Disable

Enable
0
1

The Batch Scanning Link Control is a pre-defined radio option to control the radio-on or radio-off status under batch scanning operation. Please note that if the radio
disable is activated, the radio link will be disconnected once you enter batching scanning. The radio link will be resumed when you transmit the stored data or exit batch
scanning.

The Stored Data Transmission is a pre-defined approach when you want to transmit the scanned data under batch scanning operation. You can transmit the scanned data
by placing the scanner onto the cradle or scanning “Transmit Stored Data” command, or by either one of both methods.

In batching scanning, the default setting of Delete Stored Data after Transmission is disable. The scanner will keep all stored data after transmission until you scan the
“Clear All Stored Data” command. You are also able to delete all stored data after transmission automatically by enabling this function.