Specifications
Table Of Contents
- Contents
- Tables
- Figures
- 1 Introduction
- 2 Interface Characteristics
- 2.1 Application Interface
- 2.2 RF Antenna Interface
- 2.3 GNSS Interface
- 2.4 Sample Application
- 3 Operating Characteristics
- 3.1 Operating Modes
- 3.2 Power Up/Power Down Scenarios
- 3.3 Power Saving
- 3.4 Power Supply
- 3.5 Operating Temperatures
- 3.6 Electrostatic Discharge
- 3.7 Blocking against RF on Interface Lines
- 3.8 Reliability Characteristics
- 4 Mechanical Dimensions, Mounting and Packaging
- 5 Regulatory and Type Approval Information
- 6 Document Information
- 7 Appendix
Cinterion
®
EXS62-W/EXS82-W Hardware Interface Description
1.2 Key Features at a Glance
15
t EXS62-W_EXS82-W_HID_v01.200ee 2022-09-07
Public/ Released
Page 11 of 144
GNSS Features
Modes
(see Section 2.3)
Standalone GNSS (GPS, GLONASS, BeiDou, Galileo)
Protocol NMEA (for GNSS related sentences)
General Automatic power saving modes
Software
AT commands Hayes 3GPP TS 27.007, TS 27.005, Thales
AT commands for RIL compatibility
Embedded processing
platform (optional)
Embedded processing option with API.
Memory space available for embedded applications is 512KB for applica-
tion code, 512KB for File System and 672KB for RAM. Please take into
account that the application code is copied into RAM. For more details,
please consult software documentation.
SIM Application Toolkit SAT Release 99
Firmware update Firmware update from external application over ASC0, ASC1, and USB
interface.
Interfaces
Module interface Surface mount device with solderable connection pads (SMT application
interface). Land grid array (LGA) technology ensures high solder joint reli-
ability and allows the use of an optional module mounting socket.
For more information on how to integrate SMT modules see also [5]. This
application note comprises chapters on mounting and application layout
issues as well as on additional SMT application development equipment.
USB
(see Section 2.1.3)
USB 2.0 High Speed (480Mbit/s) device interface, Full Speed (12Mbit/s)
compliant
2 serial interfaces
(see Section 2.1.4, and
Section 2.1.5)
ASC0:
• 8-wire modem interface with status and control lines, unbalanced, asyn-
chronous
• Adjustable baud rates: 300bps to 921,600bps
• Supports RTS0/CTS0 hardware flow control (as configuration option).
ASC1:
• 4-wire, unbalanced asynchronous modem interface
• Adjustable baud rates: 300bps to 921,600bps
• Supports RTS1/CTS1 hardware flow control (as configuration option).
UICC interface
(see Section 2.1.6)
Supported SIM/USIM cards: 1.8V
eUICC interface
(see Section 2.1.7)
Supports embedded MFF-XS UICC interface (as an option).
GPIO interface
(see Section 2.1.8)
7 I/O pins of the application interface programmable as GPIO.
Programming can be done via AT commands.
With the embedded processing option 13 I/O pads are programmable as
GPIOs and may be shared with other functions (ASC0, ASC1/SPI, fast
shutdown, and status).
Status
(see Section 2.1.11.1)
Supports status indication LED.
Fast shutdown
(see Section 2.1.11.3)
Supports fast shutdown interrupt signal.
Feature Implementation