Specifications

Cinterion
®
EXS62-W/EXS82-W Hardware Interface Description
1.2 Key Features at a Glance
15
t EXS62-W_EXS82-W_HID_v01.200ee 2022-09-07
Public/ Released
Page 12 of 144
ADC input Analog-to-Digital Converter with one unbalanced analog input.
SIM switch
(see Section 2.1.11.4)
Supports signal to switch between two externally connected SIMs.
Antenna interface pads
(see Section 2.2)
50Ω. GSM/LTE Main antenna, GNSS antenna
I
2
C interface
(see Section 2.1.9)
I
2
C interface only available with embedded processing option.
SPI interface
(see Section 2.1.10)
SPI interface only available with embedded processing option.
Power on/off, Reset
Power on/off Switch-on by hardware signal ON
Switch-off by AT command and hardware signal FST_SHDN
Automatic switch-off in case of critical voltage/temperature conditions
Reset Orderly shutdown and reset by AT command
Emergency reset by hardware signal EMERG_RST
Special features
Approval
(see Chapter 5)
RED, CE, FCC, ISED, UL, RoHS, and REACH compliant
GCF, PTCRB
Phonebook SIM and phone
Cinterion
®
IoT Suite ser-
vices
(Optionally) supports an IoT Suite client based on the LWM2M protocol.
The client can be configured to collect diagnostic information about the
module and cellular network and to send it periodically to the Cinterion
®
IoT
Suite servicer platform, where it can be visualized for further analysis.
Communication to Thales Device Management Hub is realized using a
resource-efficient protocol specifically designed by Thales in order to keep
the energy and data usage to a minimum. The protocol behavior may be
influenced by means of configuration.
Additionally, the service provides device control functionality. This includes
remote flash file system management, module firmware over-the-air
updates (FOTA) and remote configuration.
The Cinterion
®
IoT Suite also generates alarms when a specific module or
network parameter changes or exceeds a threshold. Alarms will be sent to
the platform as soon as possible disregarding the connection interval. For
more information, please refer to [8] and [9].
Evaluation kit (For ordering information see Section 7.1)
LGA DevKit LGA DevKit designed to test Thales LGA modules. For further details see
LGA DevKit.
Evaluation module EXSx2-W module soldered onto a dedicated PCB that can be connected to
an approval adapter in order to be mounted onto the DSB75 or DSB-Mini.
DSB75 DSB75 Development Support Board designed to test and type approve
Thales modules and provide a sample configuration for application engi-
neering. A special adapter is required to connect the EXSx2-W evaluation
module to the DSB75.
Feature Implementation