Specifications
Table Of Contents
- Contents
- Tables
- Figures
- 1 Introduction
- 2 Interface Characteristics
- 2.1 Application Interface
- 2.2 RF Antenna Interface
- 2.3 GNSS Interface
- 2.4 Sample Application
- 3 Operating Characteristics
- 3.1 Operating Modes
- 3.2 Power Up/Power Down Scenarios
- 3.3 Power Saving
- 3.4 Power Supply
- 3.5 Operating Temperatures
- 3.6 Electrostatic Discharge
- 3.7 Blocking against RF on Interface Lines
- 3.8 Reliability Characteristics
- 4 Mechanical Dimensions, Mounting and Packaging
- 5 Regulatory and Type Approval Information
- 6 Document Information
- 7 Appendix
Cinterion
®
EXS62-W/EXS82-W Hardware Interface Description
6.1 Revision History
140
t EXS62-W_EXS82-W_HID_v01.200ee 2022-09-02
Public/ Released
Page 130 of 144
Preceding document: "Cinterion
®
EXS62-W/EXS82-W Hardware Interface Description" v01.200
New document: "Cinterion
®
EXS62-W/EXS82-W Hardware Interface Description" v01.200a
Preceding document: "Cinterion
®
EXS62-W/EXS82-W Hardware Interface Description" v01.100e
New document: "Cinterion
®
EXS62-W/EXS82-W Hardware Interface Description" v01.200
Preceding document: "Cinterion
®
EXS62-W/EXS82-W Hardware Interface Description" v01.100d
New document: "Cinterion
®
EXS62-W/EXS82-W Hardware Interface Description" v01.100e
Preceding document: "Cinterion
®
EXS62-W/EXS82-W Hardware Interface Description" v01.100c
New document: "Cinterion
®
EXS62-W/EXS82-W Hardware Interface Description" v01.100d
7.1 Revised ordering information for EXS62-W Evaluation Module.
7.2 Updated module label information.
Chapter What is new
2.1.2,
3.2.1.1
Revised high level pulse width for ON signal (1ms --> 30ms).
3.2.1.2 New section Automatic Power On.
4.2 Added note regarding placement of external components.
7.1 Added new ordering number for specific EXS82-W customer variant.
Chapter What is new
7.1 Updated ordering information.
Chapter What is new
Throughout
document
Replaced MIM with eUICC.
2.1.2 Revised description for ON signal in Table 2.
2.1.4, 2.1.5 Added note below Figure 8 and Figure 10 explaining dotted lines.
2.1.7 Revised Figure 13.
Added Figure 14 showing how to connect eUICC to module’s SIM interface lines.
2.1.8.1 Revised GPIO availability with embedded processing option, and adapted whole docu-
ment accordingly.
2.1.11.3 Added note on FST_SHDN line becoming active only 3 seconds after module startup.
2.2.1 Removed “Max.” column from Table 9.
2.4 Revised sample ON circuit in Figure 31.
3.2.1.1 Revised Figure 33.
3.2.2.2 Revised description of the emergency restart process.
3.2.4.1 Clarified description of regular switch off behavior.
3.2.5.2 Added footnote for undervoltage shutdown threshold.
5.1 Added REACH directive to Table 32.
Replaced UL 60950 with UL 62368-1 in Table 33.
Changed safety standard to IEC 62368-1 in Table 34.
5.1.1 New section IEC 62368-1 Classification.
5.2 Added remark regarding responsibility of the end device manufacturer.
7.2 Completed module label information.