Specifications

Cinterion
®
EXS62-W/EXS82-W Hardware Interface Description
6.1 Revision History
140
t EXS62-W_EXS82-W_HID_v01.200ee 2022-09-02
Public/ Released
Page 133 of 144
Preceding document: "Cinterion
®
EXS62-W/EXS82-W Hardware Interface Description" v00.020
New document: "Cinterion
®
EXS62-W/EXS82-W Hardware Interface Description" v00.020a
Preceding document: "Cinterion
®
EXS62-W/EXS82-W Hardware Interface Description" v00.014
New document: "Cinterion
®
EXS62-W/EXS82-W Hardware Interface Description" v00.020
Preceding document: "Cinterion
®
EXS62-W/EXS82-W Hardware Interface Description" v00.011
New document: "Cinterion
®
EXS62-W/EXS82-W Hardware Interface Description" v00.014
4.2.1.1 Replaced land pattern and stencil figures.
4.3.1.2 Added Figure 61 with sample bar code label layout.
4.3.2.2 Added Figure 65 and Table 31 with VP box label information.
7.2 New section Module Label Information.
Chapter What is new
1.2 Revised description for “Power Supply” feature.
3.4.1 Revised some power supply ratings.
4.2.1.1 Revised section showing land pattern and stencils.
Chapter What is new
1.4 Revised Figure 2 and Figure 3 showing circuit concept.
2.1.2 Revised Table 2 listing signal properties.
2.1.2.1 Revised Table 3 listing absolute maximum ratings.
2.1.4 Added Figure 8 showing ASC0 startup behavior.
2.1.5 Added Figure 10 showing ASC1 startup behavior.
2.1.11.3 Revised Figure 21 and text for fast shutdown timing.
2.1.11.5 Revised section describing SUSPEND_MON signal.
2.2.1 Added antenna interface specifications.
2.3.2 Added Figure 30 showing sample circuit for active GNSS antenna.
2.4 Revised Figure 32 showing sample application.
3.2.1.1 Added Figure 33 as well as Figure 34 showing ON sample circuit and startup timing.
3.2.2.2 Added Figure 36 showing EMERG_RST restart timing.
3.2.3 Added signal states after startup.
3.2.4.1 Revised Figure 37 showing switch off behavior.
3.2.5.2 Revised section describing undervoltage shutdown.
3.2.5.3 Revised section describing overvoltage shutdown.
3.3 Removed section.
3.4 Added note on required type of power supply for the module.
3.4.1 Added power supply ratings.
3.5 Added Table 25 listing ambient power temperature ranges.
4.2.1.1 Revised section showing land pattern and stencils.
7.1 Added ordering information for DSB75 Mini.
Chapter What is new