Specifications
Table Of Contents
- Contents
- Tables
- Figures
- 1 Introduction
- 2 Interface Characteristics
- 2.1 Application Interface
- 2.2 RF Antenna Interface
- 2.3 GNSS Interface
- 2.4 Sample Application
- 3 Operating Characteristics
- 3.1 Operating Modes
- 3.2 Power Up/Power Down Scenarios
- 3.3 Power Saving
- 3.4 Power Supply
- 3.5 Operating Temperatures
- 3.6 Electrostatic Discharge
- 3.7 Blocking against RF on Interface Lines
- 3.8 Reliability Characteristics
- 4 Mechanical Dimensions, Mounting and Packaging
- 5 Regulatory and Type Approval Information
- 6 Document Information
- 7 Appendix
Cinterion
®
EXS62-W/EXS82-W Hardware Interface Description
2.2 RF Antenna Interface
61
t EXS62-W_EXS82-W_HID_v01.200ee 2022-09-07
Public/ Released
Page 49 of 144
RF Power @
ARP
with 50Ω Load,
(ROPR = 6)
GSM 850/900 GPRS, 1 TX 32.5 dBm
GPRS, 2 TX 30.5 dBm
EDGE, 1 TX 27.0 dBm
EDGE, 2TX 27.0 dBm
GSM 1800/1900 GPRS, 1 TX 29.5 dBm
GPRS, 2 TX 27.5 dBm
EDGE, 1 TX 26.0 dBm
EDGE, 2TX 26.0 dBm
RF Power @
ARP
with 50Ω Load,
(ROPR = 7)
GSM 850/900 GPRS, 1 TX 32.5 dBm
GPRS, 2 TX 29.5 dBm
EDGE, 1 TX 27.0 dBm
EDGE, 2TX 27.0 dBm
GSM 1800/1900 GPRS, 1 TX 29.5 dBm
GPRS, 2 TX 26.5 dBm
EDGE, 1 TX 26.0 dBm
EDGE, 2TX 26.0 dBm
RF Power @
ARP
with 50Ω Load,
(ROPR = 8, i.e.
maximum
reduction)
GSM 850/900 GPRS, 1 TX 32.5 dBm
GPRS, 2 TX 29.5 dBm
EDGE, 1 TX 27.0 dBm
EDGE, 2TX 24.0 dBm
GSM 1800/1900 GPRS, 1 TX 29.5 dBm
GPRS, 2 TX 26.5 dBm
EDGE, 1 TX 26.0 dBm
EDGE, 2TX 23.0 dBm
1. GSM (2G) only supported by EXS62-W ResM.
2. “Min.” signifies 3GPP limit in case of Receiver Input Sensitivity.
Table 9: RF Antenna interface GSM / LTE
1
Parameter Conditions Min.
2
Typical Unit