Specifications
Table Of Contents
- Contents
- Tables
- Figures
- 1 Introduction
- 2 Interface Characteristics
- 2.1 Application Interface
- 2.2 RF Antenna Interface
- 2.3 GNSS Interface
- 2.4 Sample Application
- 3 Operating Characteristics
- 3.1 Operating Modes
- 3.2 Power Up/Power Down Scenarios
- 3.3 Power Saving
- 3.4 Power Supply
- 3.5 Operating Temperatures
- 3.6 Electrostatic Discharge
- 3.7 Blocking against RF on Interface Lines
- 3.8 Reliability Characteristics
- 4 Mechanical Dimensions, Mounting and Packaging
- 5 Regulatory and Type Approval Information
- 6 Document Information
- 7 Appendix
Cinterion
®
EXS62-W/EXS82-W Hardware Interface Description
1 Introduction
15
t EXS62-W_EXS82-W_HID_v01.200ee 2022-09-07
Public/ Released
Page 9 of 144
1 Introduction
This document
1
describes the hardware of the Cinterion
®
EXSx2-W module variants optimized
for global coverage as they support a comprehensive set of bands required for global deploy-
ment. It helps you quickly retrieve interface specifications, electrical and mechanical details
and information on the requirements to be considered for integrating further components.
1.1 Product Variants
This document applies to the following Thales module variants:
•Cinterion
®
EXS62-W ResM
•Cinterion
®
EXS82-W
Note: The EXSx2-W variants differ in the fact that EXS82-W supports GSM (2G) whereas
EXS62-W ResM does not support GSM (2G). Wherever necessary a note is made to differen-
tiate between the product variants.
1.2 Key Features at a Glance
1. The document is effective only if listed in the appropriate Release Notes as part of the technical docu-
mentation delivered with your Thales product.
Feature Implementation
General
Frequency bands
(see Section 2.2.1)
GSM (EXS82-W only):
850/900/1800/1900
LTE Cat M1:
700 (Bd12, Bd13, Bd28, Bd85), 800 (Bd18, Bd19, Bd20, Bd26, Bd27), 850
(Bd5), 900 (Bd8), AWS-3 (Bd66), AWS-1 (Bd4), 1800 (Bd3), 1900 (Bd2,
Bd25), 2100 (Bd1)
LTE Cat NB1/2:
600 (Bd71), 700 (Bd12, Bd13, Bd28, Bd85), 800 (Bd18, Bd19, Bd20, Bd26),
850 (Bd5), 900 (Bd8), AWS-3 (Bd66), AWS-1 (Bd4), 1800 (Bd3), 1900
(Bd2, Bd25), 2100 (Bd1)
GSM class Small MS
Output power (according
to Release 7)
GSM/GPRS (EXS62-W ResM only):
Class 4 (+33dBm ±2dB) for GSM850 and GSM900
Class 1 (+30dBm ±2dB) for GSM1800 and GSM1900
Class E2 (+27dBm ± 3dB) for GSM850 8-PSK and GSM 900 8-PSK
Class E2 (+26dBm +3 /-4dB) for GSM 1800 8-PSK and GSM1900 8-PSK
Output power (according
to 3GPP Release 13)
LTE Cat M1:
Class 5(+20dBm ±2dB) for all supported LTE Cat M1 bands
LTE Cat NB1/2:
Class 5(+20dBm ±2dB) for all supported LTE Cat NB1/2 bands