Specifications

HKC Technology Limited
2.4G Cordless Telephone System configuration guide
Page 8
Equipment Location
When selecting a location for the equipment, consider the following:
1. The location should not be subject to excessive dirt, dust, or extremes of heat and
humidity.
2. Avoid a location subject to shock or vibration.
3. Avoid a location where equipment might be subjected to water.
4. Avoid location with direct sunlight or near high frequency noise-generating equipment,
such as next to a radio or television set.
5. Always install the equipment near a power outlet with easy access to a power switch.
6. The equipment should not be placed on top of a metal surface as this can affect the RF
signal transmission.
Installation of The Main Control Base
1. Insert the backup rechargeable battery.
a. Open the battery cover b. Install the battery c. Close the battery cover
Fig. 2 Backup rechargeable battery
2. The Base should be placed at the center of the desired service area as much as
possible so as to have maximum RF transmission performance.
3. The Base should be placed on a raised
surface, desk or shelf so that the
equipment is likely to neither fall down nor
topple over. The Stand provided should be
used to hold the Base in an upright
position.
Fig. 3 Base Stand