Service manual

OPERATIONS AND FUNCTIONS

1. Connect the main lead to an electrical outlet.

2. After placing the food in a suitable container, open the oven door and put it on the glass tray. The glass tray must always

be in place during cooking.

3. Close the door securely.

4. When the oven door is opened, the light turns off.

5. The oven door can be opened at any time during operation.

The oven will automatically shut off. To restart the oven, close the door and then touch START.

6. Each time a button is touched, a BEEP will sound to acknowledge the touch.

7. The display will show : 0 when press and hold ZERO ON button until display is turned on and beep sounds.

8. When the STOP/CLEAR button is touched during the oven operatiion, the oven stops cooking and all information

retained.

To erase all information, touch the STOP/CLEAR button once more. If the oven door is opened during the oven

operation, all information is retained.

9. If the START button is touched and the oven does not operate, check the area between the door and door is closed

securely. The oven will not start cooking under the door is completely closed or the program has been reset.

Wattage output chart

The power level is set by pressing the POWER button. The chart shows the display, the power level and the

percentage of power.

once P-HI 100%

twice P-90 90%

3 times P-80 80%

4 times P-70 70%

5 times P-60 60%

6 times P-50 50%

7 times P-40 40%

8 times P-30 30%

9 times P-20 20%

10 times P-10 10%

11 times P-00 0%

Touch POWER button Power level(Display) Approximate Percentage of Power

Make sure the oven is properly installed and plugged into the electrical.