Network Router User Manual

3-31
Cisco 12006 and Cisco 12406 Router Installation and Configuration Guide
OL-11497-03
Chapter 3 Installing the Router
Connecting to an AC Power Source
Figure 3-18 AC Power Distribution Unit
To connect AC power to the AC PDU on the router, see Figure 3-18 and follow
these steps:
Step 1 Attach an ESD-preventive strap to your wrist and connect the leash to the chassis
or to another grounded, bare metal surface.
1 Captive screws (four) 4 AC power distribution unit
2 AC power cord receptacle A 5 Guide pin
3 AC power cord receptacle B 6 Blower module connector
57650
4
1
3
2
5
6