IP Phone User Manual

Using Call Logs and Directories
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified CallManager 5.0 (SIP) 45
Using Call Logs and Directories
This section describes how you can use call logs and directories. To access both features, use the
Directories button .
Using Call Logs
Your phone maintains records of your missed, placed, and received calls.
If you want to... Then...
View your call logs Choose > Missed Calls, Placed Calls, or Received Calls. Each log can
store up to 100 records. To view a truncated listing, highlight it and press
EditDial.
Erase your call logs Press , then press Clear. Doing so erases all records in all logs.
Dial from a call log
(while not on
another call)
1. Choose > Missed Calls, Placed Calls, or Received Calls.
2. Highlight a call record from the log.
3. If you need to edit the displayed number, press EditDial followed by << or
>>. To delete the number, press EditDial followed by Delete. (You may
need to press the more softkey to display Delete.)
4. Go off-hook to place the call.
Dial from a call log
(while connected to
another call)
1. Choose > Missed Calls, Placed Calls, or Received Calls.
2. Highlight a call record from the log.
3. If you need to edit the displayed number, press EditDial followed by << or
>>. To delete the number, press EditDial followed by Delete. (You may
need to press the more softkey to display Delete.)
4. Press Dial.
5. Choose a menu item to handle the original call:
• Hold—Puts the first call on hold and dials the second.
• Transfer—Transfers the first party to the second and drops you
from the call. (Press Transfer again after dialing to complete the
action.)
• Conference—Creates a conference call with all parties, including
you. (Press
Confrn again after dialing to complete the action.)
• EndCall—Disconnects the first call and dials the second.