Quick Start Guide Cisco 811 and 813 Router Cabling and Setup 1 Cisco One-Year Limited Hardware Warranty Terms 2 Overview 3 Parts List 4 Verify the PC Setup 5 Connect the Cisco 811 or 813 Router to a PC 6 Connect the Cisco 811 or 813 Router to a Hub 7 Connect an ISDN Line 8 Connect Telephone, Fax Machine, or Modem 9 Connect the Power and Turn On the Router 10 Verifying the LEDs 11 Obtaining Documentation 12 Documentation Feedback 13 Cisco Product Security Overview 14 Obtaining Technical As
1 Cisco One-Year Limited Hardware Warranty Terms There are special terms applicable to your hardware warranty and various services that you can use during the warranty period. Your formal Warranty Statement, including the warranties and license agreements applicable to Cisco software, is available on Cisco.com. Follow these steps to access and download the Cisco Information Packet and your warranty and license agreements from Cisco.com. 1. Launch your browser, and go to this URL: http://www.cisco.
Complete the information below, and keep it for reference. Company product purchased from Company telephone number Product model number Product serial number Maintenance contract number 2 Overview This document describes the basic process of cabling and configuring the Internet access device, the Cisco 811 or 813 router. For advanced cabling information, refer to the Cisco 811 and 813 Router Hardware Installation Guide.
5 Connect the Cisco 811 or 813 Router to a PC Follow these steps to connect the Cisco 811 or 813 router to a PC: Connect the yellow Ethernet cable from the yellow Ethernet port (Cisco 811 router) or from any of the yellow Ethernet ports (Cisco 813 router) on the back panel of the router to the Ethernet port on the NIC on the computer.
6 Connect the Cisco 811 or 813 Router to a Hub Follow these steps to connect the Cisco 811 or 813 router to a hub: Connect the yellow Ethernet cable from the yellow Ethernet port (Cisco 811 router) or from any of the yellow Ethernet ports (Cisco 813 router) on the back panel of the router to the hub.
7 Connect an ISDN Line Follow these steps to connect an ISDN U line to use the data service unit (DSU) features of the router. Caution Always connect the red cable to the red ISDN U port on the router. Do not connect either cable to the yellow Ethernet port. Accidently connecting these cables to the wrong port can damage your router.
8 Connect Telephone, Fax Machine, or Modem If you have a Cisco 813 router, you can connect a touch-tone telephone, fax machine, or modem. Use the cables provided with these devices. The gray PHONE 1 and PHONE 2 ports are RJ-11 connectors. Caution Do not connect the router telephone ports to the telephone wall jack. These ports are not meant for direct connection to the public network. This connection can damage your router.
9 Connect the Power and Turn On the Router Follow these steps to connect power to the Cisco 811 or 813 router and turn it on. Figure 5 Connecting the Power to a Cisco 811 or 813 Router TO HUB TO PC Model Ci ETHERN ET 10 BAS ET CONSO LE sco 813 ISDN S/T NOR RVS 1 DSU 2 3 ISDN U Cisco 813 router +5, -24, PHONE ON OFF 4 ISDN U -71 VDC 1 2 Desktop power supply Step 1 Make sure the router power is off. Press the power switch to standby ( ).
11 Obtaining Documentation Cisco documentation and additional literature are available on Cisco.com. Cisco also provides several ways to obtain technical assistance and other technical resources. These sections explain how to obtain technical information from Cisco Systems. Cisco.com You can access the most current Cisco documentation at this URL: http://www.cisco.com/univercd/home/home.htm You can access the Cisco website at this URL: http://www.cisco.
13 Cisco Product Security Overview Cisco provides a free online Security Vulnerability Policy portal at this URL: http://www.cisco.com/en/US/products/products_security_vulnerability_policy.html From this site, you can perform these tasks: • Report security vulnerabilities in Cisco products. • Obtain assistance with security incidents that involve Cisco products. • Register to receive security information from Cisco.
Note Use the Cisco Product Identification (CPI) tool to locate your product serial number before submitting a web or phone request for service. You can access the CPI tool from the Cisco Technical Support Website by clicking the Tools & Resources link under Documentation & Tools. Choose Cisco Product Identification Tool from the Alphabetical Index drop-down list, or click the Cisco Product Identification Tool link under Alerts & RMAs.
• Packet magazine is the Cisco Systems technical user magazine for maximizing Internet and networking investments. Each quarter, Packet delivers coverage of the latest industry trends, technology breakthroughs, and Cisco products and solutions, as well as network deployment and troubleshooting tips, configuration examples, customer case studies, certification and training information, and links to scores of in-depth online resources. You can access Packet magazine at this URL: http://www.cisco.
Corporate Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 526-4100 European Headquarters Cisco Systems International BV Haarlerbergpark Haarlerbergweg 13-19 1101 CH Amsterdam The Netherlands www-europe.cisco.com Tel: 31 0 20 357 1000 Fax: 31 0 20 357 1100 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA www.cisco.
