Cisco 40-Gigabit and 100-Gigabit CFP Transceiver Modules Installation Note Revised: July 5, 2012 Product Numbers: CFP-100G-LR4 CFP-40G-SR4 CFP-40G-LR4 CVR-CPR-4SFP10G CFP-40G-FR CFP-100G-SR10 The CFP transceiver module connects the electrical circuitry of the platform with an optical network. This installation note provides instructions for installing the 40-Gigabit and 100-Gigabit CFP transceiver modules.
Overview Overview The 40-Gigabit and 100-Gigabit Ethernet CFP transceivers are hot-swappable I/O devices that plug into 40-Gigabit and 100-Gigabit Ethernet module ports. Figure 1 shows a CFP-40G-LR4 module with duplex SC fiber connectors. The CFP-100G-LR4 and CFP-40G-FR also use duplex SC fiber connectors.
Overview CFP-40G-SR4 Transceiver Features 332450 Figure 2 1 Captive installation screws 2 Optical bore dust plug 3 Transmit and receive multifiber optical bore, MPO/MTP connector Figure 3 shows a CVR-CFP-4SFP10G module. This is an adapter module that converts a Cisco switch or router CFP port to four 10-Gigabit SFP+ ports. The SFP+ transceivers are not included with the converter module.
Overview Table 1 lists the currently supported types of CFP transceivers.
Overview Table 2 lists the 100-Gigabit CFP port cabling specifications. Table 3 lists the optical transmit and receive specifications for 100-Gigabit CFP transceivers. Table 2 CFP Optical Transceiver Module Cabling Specifications CFP Transceiver Module Model Wavelength (nm) Fiber Type Core Size (µm) Modal Bandwidth (MHz/km) Cabling Distance CFP-100G-LR4 1310 SMF G.652 — 6.28 miles (10 km) CFP-100G-SR10 850 MMF 50.0 50.0 2000 (OM3) 328.1 ft (100 m) 4700 (OM4) 492.
Safety Table 3 CFP Transceiver Module Optical Transmit and Receive Specifications CFP Transceiver Module Model Transceiver Type Transmit Power (dBm) Receive Power Transmit and Receive (dBm) Wavelength (nm) CFP-40G-LR4 40GBASE-LR4, 1310-nm SMF 2.3 per lane (Max) 2.3 per lane (Max) –7 per lane (Min) –13.7 per lane (Min) 2.3 per lane (Max) 2.3 per lane (Max) –2.3 per lane (Min) –9 per lane (Min) 3.0 (Max) 3.0 (Max) 0.0 (Min) -6.
Safety Varoitus TÄRKEITÄ TURVALLISUUSOHJEITA Tämä varoitusmerkki merkitsee vaaraa. Tilanne voi aiheuttaa ruumiillisia vammoja. Ennen kuin käsittelet laitteistoa, huomioi sähköpiirien käsittelemiseen liittyvät riskit ja tutustu onnettomuuksien yleisiin ehkäisytapoihin. Turvallisuusvaroitusten käännökset löytyvät laitteen mukana toimitettujen käännettyjen turvallisuusvaroitusten joukosta varoitusten lopussa näkyvien lausuntonumeroiden avulla.
Safety Aviso INSTRUÇÕES IMPORTANTES DE SEGURANÇA Este símbolo de aviso significa perigo. Você está em uma situação que poderá ser causadora de lesões corporais. Antes de iniciar a utilização de qualquer equipamento, tenha conhecimento dos perigos envolvidos no manuseio de circuitos elétricos e familiarize-se com as práticas habituais de prevenção de acidentes.
Safety Aviso INSTRUÇÕES IMPORTANTES DE SEGURANÇA Este símbolo de aviso significa perigo. Você se encontra em uma situação em que há risco de lesões corporais. Antes de trabalhar com qualquer equipamento, esteja ciente dos riscos que envolvem os circuitos elétricos e familiarize-se com as práticas padrão de prevenção de acidentes. Use o número da declaração fornecido ao final de cada aviso para localizar sua tradução nos avisos de segurança traduzidos que acompanham o dispositivo.
Safety Cisco 40-Gigabit and 100-Gigabit CFP Transceiver Modules Installation Note 10 OL-23946-01
Safety Warning Class 1 laser product. Statement 1008 Warning Because invisible laser radiation may be emitted from the aperture of the port when no cable is connected, avoid exposure to laser radiation and do not stare into open apertures.
Required Tools Warning Ultimate disposal of this product should be handled according to all national laws and regulations. Statement 1040 Warning Use of controls, adjustments, or performing procedures other than those specified may result in hazardous radiation exposure. Statement 1057 Required Tools You will need these tools to install the CFP transceiver module: • Small flat-blade screwdriver for removing the CFP transceiver socket cover.
Installing the CFP Transceiver Figure 4 Installing the CFP Transceiver Module EMI gasket flange K 281585 LIN Captive installation screws Cisco 40-Gigabit and 100-Gigabit CFP Transceiver Modules Installation Note OL-23946-01 13
Installing the CFP Transceiver Step 5 Press firmly on the front of the CFP transceiver with your thumb to fully seat it in the transceiver socket. (See Figure 5.) Seating the CFP Transceiver Module in the Socket 281586 Figure 5 Step 6 Gently tighten the two captive installation screws on the transceiver to secure the CFP transceiver in the socket. (See Figure 6.
Installing the CFP Transceiver Step 8 When you are ready to attach the network cable interface, remove the dust plugs and inspect and clean fiber connector end faces, and then immediately attach the network interface cable connectors into the CFP transceiver optical bores. (See Figure 7and Figure 8.) Note If you are installing a FourX adapter (CVR-CFP-4SFP10G=) (shown in Figure 3), you must install 10GBASE-X SFP+ transceivers in the adapter ports.
Removing the CFP Transceiver Figure 8 Cabling an Optical CFP Transceiver Module with MPO Connectors 1 2 LINK LINK ACTIV E 332451 Network interface cable Removing the CFP Transceiver Caution The CFP transceiver is a static-sensitive device. Always use an ESD wrist strap or similar individual grounding device when handling the CFP transceivers or coming into contact with the modules. Warning Class 1 laser product.
Removing the CFP Transceiver If you need to remove a CFP transceiver, follow these steps: Step 1 Disconnect the network fiber-optic cable from the CFP transceiver connectors. Immediately reinstall the dust plugs in the CFP transceiver optical bores. Step 2 Loosen the two captive installation screws that secure the CFP to the networking module. Step 3 Slide the CFP transceiver out of the module socket. (See Figure 9.) Immediately place the CFP transceiver in antistatic protective packaging.
Translated Safety Warnings Translated Safety Warnings This section repeats in multiple languages the basic warnings that appear in this document. Statement 70—Invisible Laser Radiation Warning Warning Because invisible laser radiation may be emitted from the aperture of the port when no cable is connected, avoid exposure to laser radiation and do not stare into open apertures.
Translated Safety Warnings Statement 1008—Class 1 Laser Product Warning Waarschuwing Varoitus Class 1 laser product. Klasse-1 laser produkt. Luokan 1 lasertuote. Attention Produit laser de classe 1. Warnung Laserprodukt der Klasse 1. Avvertenza Prodotto laser di Classe 1. Advarsel Laserprodukt av klasse 1. Aviso Produto laser de classe 1. ¡Advertencia! Varning! Aviso Advarsel Producto láser Clase I. Laserprodukt av klass 1. Produto a laser de classe 1. Klasse 1 laserprodukt.
Translated Safety Warnings Statement 1040—Product Disposal Warning Waarschuwing Varoitus Ultimate disposal of this product should be handled according to all national laws and regulations. Het uiteindelijke wegruimen van dit product dient te geschieden in overeenstemming met alle nationale wetten en reglementen. Tämä tuote on hävitettävä kansallisten lakien ja määräysten mukaisesti.
Translated Safety Warnings Varning! Aviso Advarsel Vid deponering hanteras produkten enligt gällande lagar och bestämmelser. O descarte definitivo deste produto deve estar de acordo com todas as leis e regulamentações nacionais. Endelig bortskaffelse af dette produkt skal ske i henhold til gældende love og regler.
Translated Safety Warnings Statement 1057—Hazardous Radiation Exposure Warning Waarschuwing Varoitus Use of controls, adjustments, or performing procedures other than those specified may result in hazardous radiation exposure. Het gebruik van regelaars of bijstellingen of het uitvoeren van procedures anders dan opgegeven kan leiden tot blootstelling aan gevaarlijke straling.
Translated Safety Warnings Aviso O uso de controles, ajustes ou procedimentos diferentes daqueles especificados pode resultar em exposição perigosa à radiação. Advarsel Brug af kontrolfunktioner, justeringer, eller udførelse af procedurer andre end de, der er angivet, kan resultere i udsættelse for farlig bestråling.
Obtaining Documentation and Submitting a Service Request Obtaining Documentation and Submitting a Service Request For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What’s New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at: http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.