- Cisco D9865 Satellite Receiver Manual

4-16 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C
Setting Up One Button Channel Change
To Set Up One Button Channel Change
Proceed as follows to set up one button channel change:
From the Main Menu, select One Button Channel Change and press OK.
The Button colors (Red, Green, Yellow, and Blue) corresponds to the colored
buttons at the bottom of the remote control (see below).
Each color can be assigned to a channel as a shortcut for a quick channel change. For
example, if you assign the red button to channel 1, pressing the red button while
watching a different channel at anytime will automatically tune the TV channel to 1.
Note: You can only use the one button channel change if the screen is displaying
video only. The one button channel change does not work if EPG, Channel Banner
or on-screen menus are displayed.