- Cisco Router Product Overview

1
Cisco 3600 Series
Product Overview
The Cisco 3600 series is a multifunction platform that combines dial access, routing and LAN-to-LAN services and
multiservice integration of voice, video and data in the same device. The Cisco 3600 series includes the Cisco 3640 and Cisco
3620 access servers/routers. As modular solutions, the Cisco 3640 and Cisco 3620 have the flexibility to meet both current
and future connectivity requirements. The Cisco 3600 series is fully supported by Cisco IOS software, which includes dial-
up connectivity, LAN-to-LAN routing, data and access security, WAN optimization, and multimedia features.
The Cisco 3640 has four network module slots; the Cisco 3620 has two slots. Each network module slot accepts a variety of
network module interface cards, including LAN and WAN mixed media cards supporting Ethernet, Fast Ethernet, Token
Ring, and a variety of WAN technologies. These cards provide the foundation of LAN and WAN connectivity on a single,
modular, network module. Additional applications are supported with a series of network module cards offering digital
modems, asynchronous and synchronous serial, ISDN PRI, and ISDN BRI interfaces.
The Cisco 3600 shares network modules, WAN Interface Cards, and Voice Interface Cards with the Cisco 2600 Series. The
Cisco 3600 shares WAN Interface Cards with the Cisco 1600 and Cisco 1720 Series.
Figure 5-9: Cisco 3640 Router Rear View
Figure 5-10: Cisco 3620 Router Rear View
Key Features and Benefits
The Cisco 3640 and Cisco 3620 routers support the following network applications and services:
Dial-up services
Slot 0Slot 1 Power supply
Slot 3
H6551
INPUT 100-240VAC 50/60HZ 3.0-1.5 AMPS
2E
2W
W1
ETHERNET 1
ETHERNET 0
EN
AUI
WO
ACT
LNK
ACT
LNK
ACT
SERIAL
BRI
NT1
B1
B2
NT1
2
3
1
2E
2W
W1
STP
ETHERNET 0
AUI
EN
ACT
LNK
ACT
LNK
DO NOT INSTALL WAN INTERFACE
CARDS WITH POWER APPLIED
Slot 2
ACT
SERIAL
SEE MANUAL BEFORE INSTALLATION
ETHERNET 1
2E
2W
W1
1
ETHERNET 1
ETH 1
ETHERNET 0
EN
AUI
WO
ACT
LNK
ACT
LNK
ACT
SERIAL
BRI
NT1
B1
B2
NT1
2E
2W
W1
ETHERNET 0
AUI
EN
ACT
LNK
ACT
LNK
DO NOT INSTALL WAN INTERFACE
CARDS WITH POWER APPLIED
ACT
SERIAL
SEE MANUAL BEFORE INSTALLATION
Slot 0
H7238
Slot 1
0
ETHERNET 1

Summary of content (10 pages)