Installation Guide for Cisco Unified Videoconferencing Manager Release 5.5 March 2008 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.
THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS.
CONTENTS CHAPTER 1 Installing Cisco Unified Videoconferencing Manager Pre-installation 1-1 Minimum System Requirements Server Operating System 1-2 LDAP Server Types 1-2 Supported Devices 1-2 SNMP Service 1-2 Port Requirements 1-3 1-1 1-1 How to Install Cisco Unified Videoconferencing Manager 1-4 Installing Cisco Unified Videoconferencing Manager 1-4 Installing Cisco Unified Videoconferencing Desktop 1-5 How to Perform Post-installation Procedures 1-7 Confirming Installation 1-7 Running the Cisco Unifie
Contents Installation Guide for Cisco Unified Videoconferencing Manager Release 5.
CH A P T E R 1 Installing Cisco Unified Videoconferencing Manager • Pre-installation, page 1-1 • How to Install Cisco Unified Videoconferencing Manager, page 1-4 • How to Perform Post-installation Procedures, page 1-7 • Uninstalling Cisco Unified Videoconferencing Manager, page 1-9 Pre-installation Read this section before installing Cisco Unified Videoconferencing Manager.
Chapter 1 Installing Cisco Unified Videoconferencing Manager Pre-installation • Cisco MCS 7845 Series – MCS-7845-H2 – MCS-7845-I2 Server Operating System Cisco Unified Videoconferencing Manager version 5.5 requires the servers to run the Cisco Media Convergence Server operating system, which is a Cisco Systems version of the Windows 2003 version 1.2a. This version of the operating system is shipped automatically to customers purchasing this product for the first time.
Chapter 1 Installing Cisco Unified Videoconferencing Manager Pre-installation Port Requirements Table 1-1 shows the required ports for Cisco Unified Videoconferencing Manager. Make sure all required ports are available.
Chapter 1 Installing Cisco Unified Videoconferencing Manager How to Install Cisco Unified Videoconferencing Manager How to Install Cisco Unified Videoconferencing Manager During Cisco Unified Videoconferencing Manager installation Resource Manager and Network Manager components are installed. The Desktop component of Cisco Unified Videoconferencing Manager is installed separately.
Chapter 1 Installing Cisco Unified Videoconferencing Manager How to Install Cisco Unified Videoconferencing Manager Installing Cisco Unified Videoconferencing Desktop During the installation you perform a basic Desktop configuration by defining servers which Desktop uses. Follow recommendations in this section to configure Desktop correctly: • In a single Cisco Unified Videoconferencing 3545 MCU deployment, use the same gatekeeper as Cisco Unified Videoconferencing 3545 MCU is configured to use.
Chapter 1 Installing Cisco Unified Videoconferencing Manager How to Install Cisco Unified Videoconferencing Manager Step 10 In the Configure Servers window, configure server settings: a. Enter the IP address of your gatekeeper in the Gatekeeper IP address field. b. Enter the server’s NIC IP address in the IP address field under Use Cisco Unified Videoconferencing Manager for moderation.
Chapter 1 Installing Cisco Unified Videoconferencing Manager How to Perform Post-installation Procedures Note Step 16 The light next to each link indicates whether or not the connection to the target server or registration with the Gatekeeper is successful. When the light is red, a tooltip containing error details is available. Click the red light to view further error information. Remove the product CD-ROM.
Chapter 1 Installing Cisco Unified Videoconferencing Manager How to Perform Post-installation Procedures Logging in for the First Time Procedure Step 1 Access either Resource Manager or Network Manager login windows from the Start menu of the local server. Step 2 Log in to Resource Manager for the first time. The User Provisioning window opens. Step 3 (Optional) Enable directory integration to synchronize user records from a Directory Server.
Chapter 1 Installing Cisco Unified Videoconferencing Manager Uninstalling Cisco Unified Videoconferencing Manager Uninstalling Cisco Unified Videoconferencing Manager If you uninstall Cisco Unified Videoconferencing Manager, the database that Cisco Unified Videoconferencing Manager uses is removed from either the database server.
Chapter 1 Installing Cisco Unified Videoconferencing Manager Uninstalling Cisco Unified Videoconferencing Manager Installation Guide for Cisco Unified Videoconferencing Manager Release 5.
CH A P T E R 2 Backup and Restore Procedures This section is intended to assist system administrators to back up and restore the Cisco Unified Videoconferencing Manager database and configuration files. • Overview, page 2-1 • How to Perform Backup Procedure, page 2-2 • How to Perform Restore Procedure, page 2-4 Overview There are many reasons for performing system backups on a regular basis.
Chapter 2 Backup and Restore Procedures How to Perform Backup Procedure How to Perform Backup Procedure • Backing Up the Database, page 2-2 • Backing Up Configuration Files, page 2-2 • Backing Up Branding and Sound Files, page 2-3 • Backing Up the License, page 2-3 • Backing Up the Internal Gatekeeper Configuration File, page 2-4 Backing Up the Database The database backup procedure supports MySQL database version 4.0.21. This section describes how to back up MySQL database version 4.0.21.
Chapter 2 Backup and Restore Procedures How to Perform Backup Procedure • Network Manager Configuration Files, page 2-3 • Backing Up Branding and Sound Files, page 2-3 Database Connectivity Property File Place the mysql-ds.xml file under C:\Program Files\Cisco\Unified Videoconferencing Manager\CUVCMRM\jboss\server\default\deploy. Note This is the default JBOSS_HOME directory for Cisco Unified Videoconferencing Manager version 5.1. For older versions, the JBOSS_HOME directory may be different.
Chapter 2 Backup and Restore Procedures How to Perform Restore Procedure Backing Up the Internal Gatekeeper Configuration File Go to the Web interface of the internal gatekeeper on port 8011 and click Export to save the configuration files of the internal gatekeeper. How to Perform Restore Procedure This section describes how to restore Cisco Unified Videoconferencing Manager data.
Chapter 2 Backup and Restore Procedures How to Perform Restore Procedure Step 3 In the DOS window, enter the “mysql -u root” command to access the MySQL database command line user interface. The command link prompt changes to mysql>.
Chapter 2 Backup and Restore Procedures How to Perform Restore Procedure Installation Guide for Cisco Unified Videoconferencing Manager Release 5.