A P P E N D I X F IDU Updates This appendix provides details about new features and devices that are supported in the Incremental Device Update (IDU) on Resource Manager Essentials 3.5. To access IDU 13.0 on Essentials 3.5, log into Cisco.com and download it from http://www.cisco.com/cgi-bin/tablebuild.pl/cw2000-rme. This appendix contains: • Baseline Configuration Compare Command feature, page F-1 • Supported Devices in IDU on RME 3.5, page F-11 • Other Supported Features in IDU on RME 3.
Appendix F IDU Updates Baseline Configuration Compare Command feature • Running the Command • Baseline Configuration Compare Report • Report Description • Limitations of Baseline Configuration Command Usage To run the Baseline Configuration Compare command, enter: cwconfig comparewithbaseline -u userid -p password [-d debuglevel] [-m email] [-l logfile] {-device list | -view name | -device name} [-version version] {-baseline baselinefile -outputdir outputdir -report reportfile} [-generatecmdfi
Appendix F IDU Updates Baseline Configuration Compare Command feature Argument -device -view Explanation list One or more device names as a comma-separated list. Do not use this with the -input option. name -device name -version Name of the device. version -baseline outputdir reportfile -generatecmdfile -substitute -input Configuration version number. Enter either a valid version number for the device or enter latest. If you do not enter a version number, the default of latest is taken.
Appendix F IDU Updates Baseline Configuration Compare Command feature After comparing the versions, all the missing commands for each of the devices or versions are written to a separate file created under a directory. This is the directory specified by the -outputdir option. This file name is in the following format: Devicename -Ver-version -Vs-Baselinefile For commands that are disallowed on the device, the negation of the commands will be generated and stored in the file.
Appendix F IDU Updates Baseline Configuration Compare Command feature Defining Baseline Templates The baseline template can contain place-holders for device-specific values. These are called parameters. You must embed such parameters within a “[“ and “]” with no spaces in between.
Appendix F IDU Updates Baseline Configuration Compare Command feature Substituting Parameters If the commands to be downloaded onto the device contain parameters, you can specify the values for these parameters in a mapping file. You can specify the mapping file using the -substitute option. Before writing the missing commands to the file, the parameters are substituted with the appropriate values as specified in the mapping file.
Appendix F IDU Updates Baseline Configuration Compare Command feature Example of Using Baseline Configuration Command The following is an example of using the Baseline Configuration Command to compare the latest configurations of 5 devices: Cat-Dev1, Cat-Dev2, Cat-Dev3, Cat-Dev4 and Cat-Dev5 with the contents of the baseline template given below: #Mandatory (+)set logging console disable (+)set vtp domain mydomain password [domain-password] (+)set vtp mode transparent (+)set snmp community read-write [rea
Appendix F IDU Updates Baseline Configuration Compare Command feature Using the command (-)set udld enable [Ports], you have specified that none of the ports should have udld enabled. If udld is enabled on any of the ports, it is treated as a misconfiguration. Running the Command To run this command, enter: cwconfig comparewithbaseline -u username -p password -device Cat-Dev1,Cat-Dev2,Cat-Dev3,Cat-Dev4,Cat-Dev5 -baseline d:\temp\Baseline\BaseLineMandDis.cfg -report d:\temp\Baseline\MisConfig.
Appendix F IDU Updates Baseline Configuration Compare Command feature (+)set snmp community read-write [read-write-community-name-string] (-)set udld enable 2/34 (-)set udld enable 3/48 (-)set spantree macreduction disable
Appendix F IDU Updates Baseline Configuration Compare Command feature For this device, non-compliance is also because it does not have a read-write community string. For each of the non-compliant devices, the set of commands needed to make it compliant is generated. The parameters are replaced by the device-specific values, given in the mapping file. For further details, see Substituting Parameters. For example, for the non-compliant device, Cat-Dev1, in the mapping file, d:\temp\Baseline\Mapping.
Appendix F IDU Updates Supported Devices in IDU on RME 3.5 Limitations of Baseline Configuration Command The limitations of Baseline Configuration Compare command are as follows: • It does not take into account the order of commands. • This approach supports only a flat list of baseline commands. That is, it cannot search for commands within a context. For example, searching for commands within an interface. • Some of the commands have no negation. For example, set summertime recurring.
Appendix F IDU Updates Supported Devices in IDU on RME 3.5 Table F-1 Devices Supported in IDU Devices in RME 3.5 Device Type Devices/ Modules Supported Sys objectID Inventory Syslog Manager Analyzer Config. Mgmt. Software Minimum Mgmt. Software Devices Supported in IDU 13.0 Cisco Router 12000 Series 12010 1.3.6.1.4.1.9.1 Yes .348 Yes Yes Yes Yes 1.3.6.1.4.1.9.1 Yes .516 Yes Yes2 Yes Yes AS5400 HPX 1.3.6.1.4.1.9.1 Yes .274 Yes Yes2 Yes Yes 1.3.6.1.4.1.9.1 Yes .
Appendix F IDU Updates Supported Devices in IDU on RME 3.5 Table F-1 Devices Supported in IDU Devices in RME 3.5 (continued) Device Type Devices/ Modules Supported Cisco 2800 2801 Series Routers Inventory Syslog Manager Analyzer 1.3.6.1.4.1.9.1 Yes .619 2811 1.3.6.1.4.1.9.1 .576 2821 1.3.6.1.4.1.9.1 .577 2851 1.3.6.1.4.1.9.1 .578 Cisco 3800 3825 Series Routers Cisco Intelligent Gigabit Ethernet Switch Module Sys objectID 1.3.6.1.4.1.9.1 Yes .543 Config. Mgmt. Software Minimum Mgmt.
Appendix F IDU Updates Supported Devices in IDU on RME 3.5 Table F-1 Devices Supported in IDU Devices in RME 3.5 (continued) Device Type Devices/ Modules Supported Cisco Catalyst 3750-24ME 3750 Series Switches 3750G-24PS 3750G-48TS Sys objectID Inventory Syslog Manager Analyzer 1.3.6.1.4.1.9.1 Yes .574 Yes Config. Mgmt. Software Minimum Mgmt. Software Yes Yes 1.3.6.1.4.1.9.1 .516 12.1(14) AX1 12.
Appendix F IDU Updates Supported Devices in IDU on RME 3.5 Table F-1 Devices Supported in IDU Devices in RME 3.5 (continued) Device Type Devices/ Modules Supported Sys objectID Inventory Syslog Manager Analyzer Config. Mgmt. Software Minimum Mgmt. Software Yes Yes Devices Supported in IDU 9.0 Cisco Aironet Devices WMIC Bridge 3201 1.3.6.1.4.1.9.1 Yes .581 BR 1300 1.3.6.1.4.1.9.1 .565 Yes 12.2(15) JK 12.2(15) JA Cisco Catalyst 6509-NEB-A 1.3.6.1.4.1.9.1 Yes 6500 Series -IOS .
Appendix F IDU Updates Supported Devices in IDU on RME 3.5 Table F-1 Devices Supported in IDU Devices in RME 3.5 (continued) Device Type Devices/ Modules Supported Cisco IAD IAD2431Series Routers 1T1E1 Sys objectID Inventory Syslog Manager Analyzer 1.3.6.1.4.1.9.1 Yes .548 IAD24318FXS 1.3.6.1.4.1.9.1 .546 IAD243116FXS 1.3.6.1.4.1.9.1 .547 IAD243224FXS 1.3.6.1.4.1.9.1 .549 Config. Mgmt. Software Minimum Mgmt. Software Yes Yes Yes 12.2(15) ZJ3 Cisco SOHO SOHO 78 Series Routers 1.3.6.1.
Appendix F IDU Updates Supported Devices in IDU on RME 3.5 Table F-1 Devices Supported in IDU Devices in RME 3.5 (continued) Device Type Devices/ Modules Supported Sys objectID Inventory Syslog Manager Analyzer Cisco Catalyst X6380-NAM 1.3.6.1.4.1.9.5 Yes 6000 Modules .1.3.1.1.2.223 Cisco 3560 Series Switches Config. Mgmt. Software Minimum Mgmt. Software Yes Yes Yes 3.14 NAM-1 1.3.6.1.4.1.9.5 .1.3.1.1.2.914 NAM-2 1.3.6.1.4.1.9.5 .1.3.1.1.2.291 SSL 1.3.6.1.4.1.9.1 Ye .
Appendix F IDU Updates Supported Devices in IDU on RME 3.5 Table F-1 Devices Supported in IDU Devices in RME 3.5 (continued) Device Type Devices/ Modules Supported Cisco Aironet 1400 Series BR1410 Sys objectID Inventory Syslog Manager Analyzer Config. Mgmt. Software Minimum Mgmt. Software 1.3.6.1.4.1.9.1 Yes .533 Yes Yes Yes 12.2(11) JA Cisco SOHO SOHO 91 Series Routers 1.3.6.1.4.1.9.1 Yes .498 Yes Yes Yes 12.2.8 YN SOHO 96 1.3.6.1.4.1.9.1 Yes .500 Yes Yes Yes 12.2.
Appendix F IDU Updates Other Supported Features in IDU on RME 3.5 Other Supported Features in IDU on RME 3.5 The following features are supported in IDU on RME 3.5: • Polling Devices for Schedule Collection in Configuration Management: You can set the options for the attribute POLL_DEVICE in the config.properties file under NMSROOT\www\classpath\com\cisco\nm\config\archive to customize polling. You can set two values for POLL_DEVICE attribute: – No. This is the default.
Appendix F IDU Updates Other Supported Features in IDU on RME 3.5 • CMM, CSG, CSM, MWAM, SSL, and WLAN cards categorized as Catalyst 6000 modules. You can select one of the cards while distributing the image. For more details, see Online Help: Resource Manager Essentials > Software Management > Distribution > Distribute by Devices. • Log Rotation Tool (Logrot), a utility designed to simplify the administration of log files on a system which generates many log files.
Appendix F IDU Updates Other Supported Features in IDU on RME 3.5 Table F-2 Protocol Support for IDU Devices in RME 3.5 (continued) Device Type Devices Supported Telnet TFTP SSH rcp Protocol Support for IDU 10.0 Devices in Essentials 3.
Appendix F IDU Updates Other Supported Features in IDU on RME 3.5 Table F-2 Protocol Support for IDU Devices in RME 3.5 (continued) Device Type Devices Supported Telnet TFTP SSH rcp Cisco 7600 Series Routers 7613-IOS Yes Yes Yes Yes Protocol Support for IDU 8.0 Devices in Essentials 3.
Appendix F IDU Updates Other Supported Features in IDU on RME 3.5 Table F-2 Protocol Support for IDU Devices in RME 3.
Appendix F IDU Updates Other Supported Features in IDU on RME 3.5 Table F-2 Protocol Support for IDU Devices in RME 3.5 (continued) Device Type Devices Supported Telnet TFTP SSH rcp Cisco 1700 Series 1701 Yes Yes No Yes 1711 Yes Yes Yes Yes 1712 Yes Yes Yes Yes Table F-3 lists the supported Inventory custom reports for IDU devices.
Appendix F IDU Updates Other Supported Features in IDU on RME 3.5 Table F-3 Device Type Supported Inventory Custom Reports for IDU Devices (continued) Devices IP User Supported Address Field Flash RAM Hardware Card Version Type Port Count Serial No SAA Devices Supported by IDU 10.
Appendix F IDU Updates Other Supported Features in IDU on RME 3.
Appendix F IDU Updates Other Supported Features in IDU on RME 3.5 Table F-3 Device Type Supported Inventory Custom Reports for IDU Devices (continued) Devices IP User Supported Address Field Flash RAM Hardware Card Version Type Port Count Serial No SAA Devices Supported by IDU 8.
Appendix F IDU Updates Other Supported Features in IDU on RME 3.5 Table F-3 Supported Inventory Custom Reports for IDU Devices (continued) Device Type Devices IP User Supported Address Field Flash RAM Hardware Card Version Type Port Count Serial No SAA Cisco 800 Series Routers 811 Yes Yes Yes Yes No2 Yes No Yes Yes 813 Yes Yes Yes Yes No Yes No Yes Yes Yes Yes No No No No No No No Network NAM Analysis Module for Cisco 2600/3600 Series Devices Supported by IDU 7.
Appendix F IDU Updates Other Supported Features in IDU on RME 3.
Appendix F IDU Updates Other Supported Features in IDU on RME 3.5 Table F-3 Device Type Supported Inventory Custom Reports for IDU Devices (continued) Devices IP User Supported Address Field Flash RAM Hardware Card Version Type Port Count Serial No SAA Devices Supported by IDU 6.