Cisco Access Router Manager Installation Guide Software Release 1.1 Corporate Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.
THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS.
C O N T E N T S About This Guide Audience v vi Conventions vii Related Documentation viii Obtaining Documentation ix Cisco.com ix Documentation CD-ROM ix Ordering Documentation ix Documentation Feedback x Obtaining Technical Assistance xi Cisco.
Contents Configuring the Device 2-7 Enabling Traps on the Device 2-8 Setting Up a Workstation as a TFTP Server 2-9 Using Another Machine as a TFTP Server 2-9 Setting Up TFTP 2-9 Enabling the TFTP Daemon 2-9 Creating the tftpboot Directory 2-10 CHAPTER 3 Upgrading an Installed EM Upgrade Workflow CHAPTER 4 3-2 Upgrading the EM 3-3 Uninstalling the EM 4-1 Uninstall Workflow 3-1 4-2 Removing the EM Package 4-3 Removing Packages Using the cemf install Script 4-3 Removing EM Packages Using the Ins
About This Guide This guide provides installation and configuration procedures to enable you to load and begin using the Cisco Access Router Manager. Installation is accomplished through a variety of methods. This guide helps you determine the installation procedure that best suits your needs. Following installation, you must perform basic Element Management System (EMS) configuration to enable communication between the Cisco Access Router Manager and devices in the network.
About This Guide Audience Audience This installation guide is a technical resource for network managers, system administrators, network analysts, and system operators, with the following qualifications: Note • Basic understanding of network design, operation, and terminology • Familiarity with your own network configurations • Basic familiarity with UNIX • Familiarity with Cisco EMF For information pertaining to the installation of Cisco EMF, see the Cisco Element Management Framework Installatio
About This Guide Conventions Conventions This document uses the following conventions: Item Convention Commands and keywords boldface font Variables for which you supply values italic font Displayed session and system information screen Information you enter boldface screen Variables you enter italic screen Menu items and button names boldface font Selecting a menu item Option > Network Preferences font font font Note Means reader take note.
About This Guide Related Documentation Related Documentation While you can access all related documentation on the Cisco website, URLs which are available at the time of publication are noted in the following lists. The following Cisco EMF documentation is available for reference: • Quick Start Guide Cisco EMF Version 3.2 SP4 Cisco Element Manager November 2002 Upgrade http://www.cisco.com/en/US/partner/products/sw/netmgtsw/ps829/products_quick_start09186a00 80112a2d.
About This Guide Obtaining Documentation Obtaining Documentation Cisco provides several ways to obtain documentation, technical assistance, and other technical resources. These sections explain how to obtain technical information from Cisco Systems. Cisco.com You can access the most current Cisco documentation on the World Wide Web at this URL: http://www.cisco.com/univercd/home/home.htm You can access the Cisco website at this URL: http://www.cisco.
About This Guide Obtaining Documentation Documentation Feedback You can submit comments electronically on Cisco.com. On the Cisco Documentation home page, click Feedback at the top of the page. You can e-mail your comments to bug-doc@cisco.com. You can submit your comments by mail by using the response card behind the front cover of your document or by writing to the following address: Cisco Systems Attn: Customer Document Ordering 170 West Tasman Drive San Jose, CA 95134-9883 We appreciate your comments.
About This Guide Obtaining Technical Assistance Obtaining Technical Assistance Cisco provides Cisco.com, which includes the Cisco Technical Assistance Center (TAC) Website, as a starting point for all technical assistance. Customers and partners can obtain online documentation, troubleshooting tips, and sample configurations from the Cisco TAC website. Cisco.com registered users have complete access to the technical support resources on the Cisco TAC website, including TAC tools and utilities. Cisco.
About This Guide Obtaining Technical Assistance Cisco TAC Website You can use the Cisco TAC website to resolve P3 and P4 issues yourself, saving both cost and time. The site provides around-the-clock access to online tools, knowledge bases, and software. To access the Cisco TAC website, go to this URL: http://www.cisco.com/tac All customers, partners, and resellers who have a valid Cisco service contract have complete access to the technical support resources on the Cisco TAC website.
About This Guide Obtaining Additional Publications and Information Obtaining Additional Publications and Information Information about Cisco products, technologies, and network solutions is available from various online and printed sources. • The Cisco Product Catalog describes the networking products offered by Cisco Systems as well as ordering and customer support services. Access the Cisco Product Catalog at this URL: http://www.cisco.com/en/US/products/products_catalog_links_launch.
About This Guide Obtaining Additional Publications and Information Cisco Access Router Manager Installation Guide xiv OL-3598-02
C H A P T E R 1 Overview The Cisco Access Router Manager routers are a multifunctioning platform that combines dial access, routing and LAN–to–LAN services, and multiservice integration of voice, video and data in the same device.
Chapter 1 Overview Cisco EMF Software Features Cisco EMF Software Features Cisco EMF provides a flexible framework which supports a variety of EMs, making it possible to manage multiple device types within a given network on a single system. Common network management functionality provides for complete management of the logical and physical components of the network. Using a solid base, Cisco EMF provides vital core functionality which allows for optimal network management when combined with EMs.
Chapter 1 Overview EM Software Features EM Software Features Installed with Cisco EMF, the EM allows for precise management of the device(s) it supports through custom GUI windows and modeling behavior. Invoked from the Cisco EMF Map Viewer application, the EM provides Fault, Configuration, Accounting, Performance, and Security (FCAPS) windows on chassis, module, interface, and connection levels as applicable.
Chapter 1 Overview System Requirements System Requirements The EM can be deployed in a number of different configurations, from a single hardware system to a multisite distributed management system. All Cisco EMF–based solutions run on Sun Solaris/SPARC hardware running the Solaris operating environment, release 8. Use the Cisco Access Router Manager only with Cisco Access routers using a supported Cisco IOS Release. For a list of the supported Cisco IOS releases, see the accompanying release notes.
Chapter 1 Overview System Requirements Server Requirements The recommended minimum hardware requirements for servers are: • Large network (defined as 401 or more chassis deployed) – Sun Microsystems ™ SunFire V880, SunFire V480, Netra 1405, Enterprise 450, Enterprise 420 or similar – 4 to 8 GB RAM – 4 processors (440 MHz or above; typically 750 MHz) – 4 to 8 GB swap space • Medium network (defined as 150 to 400 chassis deployed) – Sun Microsystems ™ SunBlade 2000, SunBlade 1000, Netra 20, Ultra 60, Sun
Chapter 1 Overview Supported Objects Supported Objects The following are categories of physical objects supported by the Cisco Access Router Manager software: • Routers • Modules The following table displays a list of switchesroutersroutersrouters supported by Cisco Access Router Manager.
Chapter 1 Overview Supported Objects Table 1-1 Supported Routers (continued) Cisco Router Description Cisco 2650 Cisco 2650–DC Cisco 2650–RPS Cisco 2650XM Cisco 2650XM-DC 2650 with AC power supply, includes IP software only 2650 with DC power supply, includes IP software only 2650 with RPS adapter plate installed, includes IP software only High Performance 10/100 Modular Router w/Cisco IOS IP High Performance 10/100 Modular Router w/Cisco IOS IP-DC NEBs High Performance 10/100 Modular Router w/Cisco
Chapter 1 Overview Supported Objects The following tables display the generic, ATM, and Ethernet modules supported by Cisco Access Router Manager.
Chapter 1 Overview Server and Client Installation Server and Client Installation The EM can be deployed in a distributed manner to utilize the power of multiple machines. Two types of deployment are available: server and client. Server and client installations, however, cannot run on the same workstation. You can install either a server or a client on one machine, but not both. Note that the EM installation type, server or client, must match that of the installed Cisco EMF software.
Chapter 1 Overview Server and Client Installation Cisco Access Router Manager Installation Guide 1-10 OL-3598-02
C H A P T E R 2 Installing the EM Installation procedures are described in the following sections: • Installation Workflow, page 2-2 • Installing the EM from a Remote CD–ROM Drive, page 2-3 • Installing the EM, page 2-4 • Configuring the System, page 2-7 Cisco Access Router Manager Installation Guide OL-3598-02 2-1
Chapter 2 Installing the EM Installation Workflow Installation Workflow Installing the EM involves the following: 1. System requirements—Confirm the proper preinstallation procedures by reviewing the “System Requirements” section on page 1-4. 2. Cisco EMF—Verify that you have the following required Cisco EMF 3.2 server/client software installed before proceeding: a. Cisco EMF 3.2 b. Cisco EMF 3.
Chapter 2 Installing the EM Installing the EM from a Remote CD–ROM Drive Installing the EM from a Remote CD–ROM Drive To install the EM software on a system that does not have its own CD–ROM drive, proceed as follows: Tip EM installation is significantly faster when Cisco EMF is not initialized. Before beginning the installation process, you can determine if Cisco EMF is initialized. For additional information, see the “Checking the Status of the EM” section on page 5-2.
Chapter 2 Installing the EM Installing the EM Installing the EM After you install Cisco EMF (and the required patches) and acquire a valid license, you can install Cisco Access Router Manager using the appropriate install script. Note For details on installing Cisco EMF, see the Cisco Element Management Framework Installation and Administration Guide at the following URL: http://www.cisco.com/en/US/partner/products/sw/netmgtsw/ps829/products_installation_and_configur ation_guide_book09186a00800ffd0d.
Chapter 2 Installing the EM Installing the EM INSTALL PACKAGE: 1) Cisco Access Router Manager Server—(No CEMF Initialization Required) q) Quit Which package do you wish to install? (Def:1) [?,q] Tip Step 4 Enter ? for help or q to quit. Choose the appropriate installation option. The utility determines the package upgrade and install list. For first time EM installations, all associated EM packages and the selected EM component (e.g.
Chapter 2 Installing the EM Installing the EM Step 7 When the installation is complete, exit the CD–ROM area as necessary by entering the following: cd / You can start a user session, if needed, and begin using the installed package. For additional information, see the “Starting a User Session” section on page 5-3.
Chapter 2 Installing the EM Configuring the System Configuring the System Configuring the system involves the following steps: • Configuring the Device, page 2-7 • Enabling Traps on the Device, page 2-8 • Setting Up a Workstation as a TFTP Server, page 2-9 Configuring the Device To enable the EM to communicate with routers, certain configuration tasks must be performed. Until these configuration tasks are completed, the EM cannot contact routers and no management can begin.
Chapter 2 Installing the EM Configuring the System Step 5 If the router does not currently accept Telnet sessions, enter commands as follows: Router> enable Password: Router# configure terminal Router (config)# line vty Router (config-line)# password Router (config-line)# login Router (config-line)# exit Router (config)# exit Router# The preceding configuration assumes you have not configured user names in the Cisco IOS software.
Chapter 2 Installing the EM Configuring the System Setting Up a Workstation as a TFTP Server Configuring a TFTP server enables the Configuration Backup/Restore to operate. Setting up a workstation as a TFTP server is described in the following sections: • Using Another Machine as a TFTP Server • Setting Up TFTP • Enabling the TFTP Daemon • Creating the tftpboot Directory Using Another Machine as a TFTP Server Configuring the EM server as a TFTP server is optional.
Chapter 2 Installing the EM Configuring the System Output similar to the following appears: *.tftp Idle If there is no output, tftpd is not enabled. For additional information on TFTP, refer to the UNIX main pages on tftp and tftpd. Creating the tftpboot Directory The tftpboot directory stores configuration files from the EM managed routers.
C H A P T E R 3 Upgrading an Installed EM Upgrading procedures are described in the following sections: • Upgrade Workflow, page 3-2 • Upgrading the EM, page 3-3 Cisco Access Router Manager Installation Guide OL-3598-02 3-1
Chapter 3 Upgrading an Installed EM Upgrade Workflow Upgrade Workflow Upgrading the EM involves the following: 1. Cisco EM—Verify that an earlier version of the Cisco Access Router Manager has been installed on your system. 2. Cisco EMF —Verify that you have the following required Cisco EMF 3.2 server/client software and COM version installed before proceeding: a. Cisco EMF 3.2 b. Cisco EMF 3.2 patch 6 Note 3.
Chapter 3 Upgrading an Installed EM Upgrading the EM Upgrading the EM After you have ensured that the proper versions of Cisco Access Router Manager and Cisco EMF have been installed on your system, you can initiate the upgrade procedures using an install script.
Chapter 3 Upgrading an Installed EM Upgrading the EM [Press Enter to go to the UPGRADE main menu] Step 4 Press Enter. The upgrade main menu is displayed.
Chapter 3 Upgrading an Installed EM Upgrading the EM Note If the options entered in the previous steps are invalid, the script notifies you of the error, lists the valid option(s), and redisplays the selection prompt. Enter a valid selection and continue. You can start a user session, if needed, and begin using the upgraded package. For additional information, see the “Starting a User Session” section on page 5-3.
Chapter 3 Upgrading an Installed EM Upgrading the EM Cisco Access Router Manager Installation Guide 3-6 OL-3598-02
C H A P T E R 4 Uninstalling the EM Procedures on how to uninstall the EM are described in the following sections: • “Uninstall Workflow” section on page 4-2 • “Removing the EM Package” section on page 4-3 • “Removing the EM Package and Associated Packages” section on page 4-6 Cisco Access Router Manager Installation Guide OL-3598-02 4-1
Chapter 4 Uninstalling the EM Uninstall Workflow Uninstall Workflow Uninstalling the EM involves the following: 1. 2.
Chapter 4 Uninstalling the EM Removing the EM Package Removing the EM Package You can uninstall the EMs using the provided scripts. Use one of the following options listed here to remove the software: • Removing Packages Using the cemf install Script, page 4-3 • Removing EM Packages Using the Install Script, page 4-4 You need not uninstall the EM to install a later version. For additional information, see the “Installing the EM” section on page 2-4.
Chapter 4 Uninstalling the EM Removing the EM Package Removing EM Packages Using the Install Script You can selectively remove an EM package (e.g., Cisco Access Router Manager server or Cisco Access Router Manager client) using the appropriate install script with the -r command. The -r command allows you to leave the shared components on the system and only remove the EM package (i.e., the associated packages are not removed).
Chapter 4 Uninstalling the EM Removing the EM Package Step 4 To uninstall a package, enter the appropriate option at the prompt. The utility verifies the option selected and a confirmation of the uninstall appears. If the option entered in the previous step is invalid, the script notifies you of the error, lists the valid option(s), and redisplays the selection prompt. Enter a valid selection and continue. Step 5 Enter the appropriate confirmation at the prompt (y or n).
Chapter 4 Uninstalling the EM Removing the EM Package and Associated Packages Removing the EM Package and Associated Packages You can selectively remove an EM package and all associated components using the install script with the -r -all command. The -r -all command does not allow you to leave shared components on the system (i.e., the EM package and all associated components are removed).
Chapter 4 Uninstalling the EM Removing the EM Package and Associated Packages If the option entered in the previous step is invalid, the script notifies you of the error, lists the valid option(s), and redisplays the selection prompt. Enter a valid selection and continue. Step 5 Enter the appropriate confirmation at the prompt (y or n).
Chapter 4 Uninstalling the EM Removing the EM Package and Associated Packages Cisco Access Router Manager Installation Guide 4-8 OL-3598-02
C H A P T E R 5 Getting Started Information on starting an EM session is presented in the following sections: • “Checking the Status of the EM” section on page 5-2 • “Starting a User Session” section on page 5-3 • “Stopping a User Session” section on page 5-4 Cisco Access Router Manager Installation Guide OL-3598-02 5-1
Chapter 5 Getting Started Checking the Status of the EM Checking the Status of the EM To check the status of Cisco EMF/EM, enter commands as follows: CEMF_ROOT/bin/cemf query (Replace CEMF_ROOT with the name of the directory where Cisco EMF is installed.) A message appears indicating that the Cisco EMF manager system is running. A list of running processes is also displayed. If Cisco EMF is not active, a message appears indicating that the Cisco EMF manager system is not running.
Chapter 5 Getting Started Starting a User Session Starting a User Session Starting the Cisco EMF manager system automatically starts the EM. To start the Cisco EMF manager system, follow these steps. Step 1 Ensure that Cisco EMF is running. For further information, see the “Checking the Status of the EM” section on page 5-2. Note If Cisco EMF is already started, proceed to step 4. Step 2 Log in as a root user.
Chapter 5 Getting Started Stopping a User Session Stopping a User Session To stop only the Cisco EMF/EM user session, do the following: Step 1 Close any open Cisco EMF/EM windows. When you close the Launchpad window, your user session is terminated. Step 2 Confirm your decision to quit the Cisco EMF manager system by clicking Yes. The Cisco EMF/EM user session ends.
I N D EX A F audience for this document features vi Cisco EMF EM C cautions, significance of Cisco.
Index R U requirements uninstall client removing EM package 1-5 licensing server 4-3 to 4-5 removing EM packages and COM components using install script 4-6 to 4-7 1-4 1-5 system 4-1 removing EM packages using cemf_install script 1-4 to 1-5 removing EM packages using install script workflow S 4-3 4-4 to 4-5 4-2 upgrade upgrading the EM script, using to install workflow 2-4 to 2-6 3-3 3-2 setting up EM configuring 2-7 to 2-8 TFTP server, setting up a workstation as TFTP, setting
