Switch User's Manual

11
Catalyst 6000 Family Multilayer Switch Feature Card 2 Installation Note
78-10605-03
Installing the MSFC2
To install the MSFC2 on the supervisor engine, follow these steps:
Step 1 Remove the MSFC2 from its antistatic bag.
Step 2 Align the MSFC2 with the standoffs on the supervisor engine. (See Figure 4).
Figure 4 Male Standoff Location on the Supervisor Engine
Step 3
Ensure that the connectors on the MSFC2 (see Figure 5) are aligned with the connectors on the
supervisor engine.
Figure 5 MSFC2 Connectors
SUPERVISOR ENGINE I I I
CONSOLE
SWITCH LOAD
1%
100%
ACTIVE ACTIVE AC
TIVE
RESET
SLO
T 0
SYSYEM
STATUS
WS-X5530
39134
Male standoff
6-pin connector
Edge connector
63702