Datasheet

ManualsBrandsCisco ManualsNetworkingAIR-AP1020-I-K9

Data Sheet

Cisco Aironet 1000 Series Lightweight Access Points

Cisco Aironet 1000 Series Lightweight Access Points provide industry-leading RF

capabilities with the widest breadth of deployment options for maximum wireless LAN

performance, security, reliability, and ease of use. This makes the Cisco wireless LAN

solution ideally suited for any enterprise environment.

Figure 1. Cisco Aironet 1000 Series Lightweight Access Points

Cisco

Aironet 1000 Series lightweight access points are specifically designed for operation with

Cisco Wireless LAN Controllers and the Wireless Control System management tool. They provide

dual band support for both 802.11a, 802.11b and 802.11g, simultaneous air monitoring for

dynamic, real time RF management. In addition, Cisco Aironet 1000 Series Lightweight Access

Points handle time-sensitive functions, such as Layer 2 encryption, that enable Cisco wireless

LANs to securely support voice, video, and data applications (Figure 2).

Figure 2. Enterprise-Wide RF Intelligence

Summary of content (9 pages)

PAGE 1
Data Sheet Cisco Aironet 1000 Series Lightweight Access Points Cisco Aironet 1000 Series Lightweight Access Points provide industry-leading RF capabilities with the widest breadth of deployment options for maximum wireless LAN performance, security, reliability, and ease of use. This makes the Cisco wireless LAN solution ideally suited for any enterprise environment. Figure 1.
PAGE 2
Data Sheet Cisco Aironet 1000 Series Lightweight Access Points combine simultaneous data forwarding and air monitoring functions eliminating the need for additional dedicated monitoring nodes and thereby reducing the cost of operating wireless networks. This simplifies network design and deployment and maximizes RF security by extending real-time monitoring to every corner of a wireless infrastructure (Figure 3). Figure 3.
PAGE 3
Data Sheet Flexible Deployment Options Cisco Aironet 1000 Series Lightweight Access Points come equipped with internal 2.4 and 5GHz radios and sectorized antennas, with the 1020 and 1030 models supporting RP-TNC connectors to connect optional external antennas. Cisco Aironet 1000 Series Lightweight Access Points are also available with a single 2.4 GHz radio, for installations where 5 GHz is not allowed due to regulatory restrictions. Multimode 802.
PAGE 4
Data Sheet The AP1030 features both integrated sector antennas and an RP-TNC connector for external antennas and an expanded set of software features designed for a variety of specific applications. ● Remote Edge Access Point (REAP) capabilities allow the AP1030 to be deployed remotely from the wireless LAN controller making it ideal for branch office and small retail locations.
PAGE 5
Data Sheet Features and Benefits Table 1 lists the features and benefits of Cisco Aironet 1000 Series Lightweight Access Points. Table 1.
PAGE 6
Data Sheet Item Nonoverlapping Channels Specification ● 802.11a: Up to 12 ● 802.11b/g: Up to 3 ● Dependent upon country-specific regulatory approvals Wireless Modulation ● 802.11a: Orthogonal frequency division multiplexing (OFDM) ● 802.11b: Direct sequence spread spectrum (DSSS) ● 802.11g: DSSS and OFDM Receive Sensitivity (Typical) 802.11a: ● –73 dBm at 54 Mbps ● –75 dBm at 48 Mbps ● –80 dBm at 36 Mbps ● –83 dBm at 24 Mbps ● –87 dBm at 18 Mbps ● –89 dBm at 12 Mbps ● –90 dBm at 9 Mbps 802.
PAGE 7
Data Sheet Item Specification Compliance Safety: ● UL 60950, Third Edition ● UL 2043 ● EN 50385:2002 ● RSS 102 ● FCC OET 65 Electrical safety: ● UL 60950-1:2003, First Edition ● CSA C22.2 No. 60950-1-03 Radio approvals: ● US: FCC Part 15 subparts C and E ● EN 300 328 V1.4.1 ● EN 301 893 V1.2.3 ● Canada: RSS-210 ● Europe: EN 301.893, EN 300.
PAGE 8
Data Sheet Ordering Information Table 3 provides ordering information for Cisco Aironet 1000 Series Lightweight Access Points. To place an order, visit the Cisco Ordering Website. http://www.cisco.com/en/US/ordering/index.shtml Table 3. Product Part Numbers for Cisco Aironet 1000 Series Lightweight Access Points Part Number Product Name AIR-AP1010-A-K9 Cisco Aironet 1000 Series 802.11a/b/g Access Point w/Int Antennas, FCC configuration AIR-AP1020-A-K9 Cisco Aironet 1000 Series 802.
PAGE 9
Data Sheet Part Number Product Name AIR-ACCCEBZL1000= Cisco Aironet 1000 Series ceiling-mount bezel kit AIR-PWRINJ1000AF= 802.3af power injector for Cisco Aironet 1000 Series Lightweight Access Points Note: 1. Customers deploying access points that are not using Power over Ethernet (PoE) must separately order the power supply (AIR-PWR-1000=) or Cisco 802.3af power injector (AIRPWRINJ-1000AF=) and associated power cord. 2.