Datasheet

Installing 2T16S Network Processor Modules in the Cisco 4000 Series

78-3277-03

Figure 8 Aligning the 2T16S Network Processor Module with the Chassis

Step 5

Make sure that the male connector on the network processor module is lined up side-to-side with the

female connector on the motherboard, and then gently press point A shown in Figure 9.

Figure 9 Pressing the 2T16S Network Processor Module into Place

Step 6 Gently press point B as shown in Figure 9, inserting the male connector into the female connector on the

motherboard. With a small amount of force the connector snaps together.

Make sure that the connector on the network processor module is firmly seated on the female connector

on the motherboard. (See Figure 10.)

H8761

H8762