Datasheet

Installing 2T16S Network Processor Modules in the Cisco 4000 Series
29
Installing 2T16S Network Processor Modules in the Cisco 4000 Series
78-3277-03
Step 5 Attach the top bracket, notches down, over the serial port wires to the U clamp. The notches on the
U-shaped clamp hold the top clamp in place automatically. Push the top clamp down far enough to hold
the wires snugly in place. (See Figure 25.)
Figure 24 Connecting a Cable Clamp to the Cable Support Tray
H8749
Top bracket
(ridges toward cable)
Rivet
C
able support tray
U clamp