Owner`s manual

AccessLine Communications
Owner’s Manual AccessLine 3-9-11
14
3 INSTALLING YOUR DPS FLEX PHONE SYSTEM
Installing Cordless Base and Handsets
Cordless Handsets can be installed in the following ways
 You may use up to 3 Cordless Handsets per Cordless Base.
Connecting the Cordless Base:
1. Open the Cordless Base box and remove the cordless base,
power clip, power adapter and blue Ethernet cable.
Connect one end of the blue Ethernet cable to the blue INTERNET
port on the rear of the Cordless Base
2. Connect the other end of the blue Ethernet cable to any free
port on your existing router or anywhere on your existing data
network.
3. Connect the Cordless Base power adapter to the “DC 5V
Power” connector at the rear of the Cordless Base
, and then plug the power adaptor into a power outlet.