Owner`s manual

AccessLine Communications

Owner’s Manual AccessLine 3-9-11

Note

The ports labeled “PHONE” and “LINE” at the rear of the Cordless

Base are not used. Do not connect anything to these connectors.

WARNING

The “RESET” button at the rear of the Cordless Base is not used.

Pressing the RESET button will make your Cordless Base

inoperable and require replacement.

Setting up the Cordless Handsets

4. Open Cordless Handset box and remove the Cordless

Handset, Power Clip, Power Adapter, and Charging Cradle.

5. Each Cordless Handset purchased from AccessLine will come

with batteries pre-installed. Batteries must be charged for 10

hours prior to first use. See instructions for installing batteries if

not installed.

6. Remove the protective film from the Handset and charging

cradle.

7. Install the optional Belt Clip on the Cordless Handset