Owner`s manual

AccessLine Communications
Owner’s Manual AccessLine 3-9-11
24
PHONE
Feature Not Supported
LINE
Feature Not Supported
Page/Registration
Steady green—One or more Handset is registered.
Fast flashing green—The Base is in registration
mode. To activate registration mode, press the button
for at least 7 seconds.
Slow flashing green—The Base is in paging mode or
a Handset is off hook. To activate paging mode to
locate a Handset, press the button for a few seconds;
Handsets ring.
Off—No Handset is registered to the Base.
Locating Handsets
To locate Handsets that may have been misplaced, you can have all
Handsets registered to the Cisco SPA232D receive a ringing “locator
call.” To page all Handsets, on the Cisco SPA232D, briefly press the
Page/Registration button until the green status light flashes
slowly.
A “Handset locator” message displays on the ringing Handsets.
Press the Start Call or End Call button to stop the ringing.
Note: If the Handset ringer is turned off, the Handset locator
call does not ring.