Owner`s manual

AccessLine Communications
Owner’s Manual AccessLine 3-9-11
29
Turning the Handset On and Off
To turn the Handset on and off, press and hold the End
Call button.
Note: Placing the Handset into the cradle
automatically turns the Handset on, even it if has been
shut off.
Options When the Handset is Idle
 Redial—Press to dial the last number called.
 Intercom (Unsupported)—Press to call another Cisco
SPA302D that is registered to the same Cisco SPA232D.
Choose the Handset from a list and press the center
Select button.
 Parked Calls—Retrieve a parked call. See “Parking a
Call”
 Grp Pickup (Unsupported)—Pick up a call ringing at
another Handset in a group of phones.
 Pickup (Unsupported)——Pick up a call ringing at a
specified extension.
 Keylock—Press to lock the phone. To unlock, press the
center Select button, and then press the asterisk key (*).
Options When There is an Active Call
 New Call—Put an active call on hold and begins a new
call.
 Hold—Put a call on hold. See “Putting a Call on Hold”
 Transfer—Transfer the call. See “Transferring a Call”
 Conference—Create a conference call between you, the
caller on the active call and another caller. See “Placing a
Three-Way Conference Call”
Navigating through the Phone Menus
 From the main display screen, press the Left softkey to
access the Options menu (Redial, Intercom, and
Keylock).
 Press the Right softkey to access the Contacts menu.
 These buttons also provide other options such as Cancel
and Back, depending on the phone menu that you are
viewing.
 On the Cisco SPA302 Handset, press the Select button in
the center of the 4-way navigation keypad to access
additional phone functions.