Owner`s manual

AccessLine Communications
Owner’s Manual AccessLine 3-9-11
31
To mute the Handset microphone, press the Mute button on the
Handset. The mute icon appears at the top of the Handset
display.
Answering or Ignoring a Call
To answer an incoming call, do one of the following tasks:
 Press the Start Call button.
 Press the Left softkey to select Answer.
 Press the Speakerphone button to answer with the
speakerphone.
To decline to answer a call, press the Right softkey to select
Ignore.
Placing a Call
To place a call, do one of the following tasks:
 Enter the number on the keypad and press the green
Start Call button.
 To use the speakerphone, enter the number on the
keypad and press the Speakerphone button.
Managing Contacts:
You can store Private and Shared contacts on your Handset.
Private contacts are specific to each Handset. Shared contacts
are available on all Handsets registered to the Cisco SPA232D
(Base). When a Shared contact is entered from a Handset, the
contact is made available to all Handsets registered to the same
Base station.
You can configure up to 100 Private contacts, and 50 Shared
contacts on the Cisco SPA302D.
To configure contacts:
1 Press the center Select button.
2 Select Contacts.
3 Select Private (contacts are stored only on this Handset)
or Shared (contacts are shared and stored among all
Handsets registered to the same Cisco SPA232D).
4 Press the Options softkey to perform one of the following
actions:
 Add New: Add a new contact. Enter the name and
number, then press the Save softkey. Names and
numbers have a 32-character limit.
 Edit Dial: Retrieves the number from the Contacts list and
opens the dialler window, so that the number can be
edited before dialling. Press the Right and Left Arrow