Owner`s manual

AccessLine Communications

Owner’s Manual AccessLine 3-9-11

made available to all Handsets registered to the same Base

station.

You can configure up to 100 private contacts and 50 shared

contacts on the Cisco SPA302D.

To configure contacts:

1 Press the center Select button.

2 Choose Contacts.

3 Choose Private (contacts are stored only on this Handset)

or Shared (contacts are shared and stored among all

Handsets registered to the same Cisco SPA232D).

4 Press the Options softkey to perform one of the following

actions:

• Add New—Add a new contact. Enter the name and number, and

then press the Save softkey. Names and numbers have a 32-

character limit.

• Edit Dial—Retrieves the number from the Contacts list and

opens the dialler window, so that the number can be edited before

dialling (for example, to add a steering digit to reach an outside

line). Press the Right and Left Arrow buttons to move the cursor in

the number field and the Back softkey to delete characters.

• Edit—Edit the name and number of the contact. You can also

assign a ringtone for the contact. Press Save to save your

changes.

• Delete—Deletes the selected contact. Press Confirm to delete.

• Delete All—Deletes all contacts. Press Confirm to delete all

contacts.

Changing Handset Settings

A unique Handset name can be defined, which is reflected in the

upper right corner of the display. The Handset name is used to

identify the SPA302D with the Intercom and Handset

deregistration.

To change the Handset name, display language, or input

language:

1 From the Settings menu, choose Handset Settings.

2 Press the Up and Down arrow buttons to select the field

you want to change. Press the Right and Left arrow

buttons to change the values in the field.

3 Press Save.

Upgrading the Handset Software

Upgrading the Handset Software: (Unsupported) For assistance,

please call Customer Service.

Performing a Factory Reset

Performing a Factory Reset: (Unsupported) For assistance, please

call Customer Service.