C32604HD 32 Inch LCD Television • High Resolution 1366 x 768 • • • "U-VM" Detection & Recovery Di²-E Technology HDMI (High-Definition Multimedia Interface) USER MANUAL www.citizen-electronics.
Explanation of WARNING Symbols Dangerous Voltage: The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of dangerous voltage within the inside of the product that may be of sufficient level to constitute a risk of electric shock. Instruction: The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying this product.
17) Do not expose your LCD TV to dripping or splashing, and do not place objects filled with liquids on it. 18) The Shock Hazard Marking and Associated Graphical Symbol are provided on the back panel of the unit. 19) This product is only to perform the useful function of entertainment and visual display tasks are excluded. 20) Wall or ceiling mounting: When mounting the product on a wall or ceiling, be sure to install the product according to the method recommended by the manufacturer.
Content ACCESSORIES................................................................................................................. 1 FRONT PANEL BUTTONS ................................................................................................ 2 BACK PANEL BUTTONS................................................................................................... 3 REMOTE CONTROL ......................................................................................................... 4 INSTALLATION...
ACCESSORIES Thank you for purchasing this LCD-TV.
FRONT PANEL BUTTONS X Y Z [ \ ] ^_` 1 Volume Down (decrease volume) 2 Volume Up (increase volume) 3 On Screen Display Menu On/Off 4 Scroll Down (Channel down) 5 Scroll Up (Channel Up) 6 Enter 7 Power ON/OFF 8 Remote Control Receiver 9 Power LED Indicator 2
BACK PANEL BUTTONS A B C D EFG H I J K A Power Input (AC Input) B HDMI Input Terminal (19 pin) C VGA (15 pin) Signal Input from Computer D YPbPr / HD Component Video Input E S-Video Input F Composite Video input G Audio Input for VGA (PC Sound Card) H Audio Input for YPbPr or HD Component (left/ right) I Audio Input for AV or S-Video (left/right) J Audio Output (left/right) K RF Antenna / Cable TV Input 3
REMOTE CONTROL 4
Remote control button function as follows: 1 POWER Power ON/OFF 2 MTS MTS (Multi-Channel TV Sound) select 3 INFO Display the current information 4 SOUND Select situation mode for sound 5 SLEEP Set TV Sleep timer 6 FREEZE Freeze picture 7 0~9 NUMBER Select channel numbers below 100 8 100 Select channel numbers 100 and above 9 + VOL - Adjust volume up or down 10 UP / DOWN / LEFT / RIGHT / ENTER UP/ DOWN/ LEFT/ RIGHT: Select or adjust the function of the OSD ENTER: 1) Enter the OSD
INSTALLATION Connecting RF antenna or Cable TV Wire Make sure the power is OFF before installing your LCD TV. Connect the LCD TV to a TV antenna wire or cable/satellite box with 75-ohm coaxial cable. Preset the TV channels into memory with AUTO SCAN function (see page 14) when using an antenna or cable TV system without a cable connecter box.
2) With S-Video cable: S-Video Cable (not supplied) VCD or DVD Player Audio in Cable (not supplied) 3) With YPbPr cable: YPbPr Cable (not supplied) VCD or DVD Player Audio in Cable (not supplied) 4) With HDMI cable: VCD or DVD Player (DVD Player should have an HDMI Output terminal) HDMI Cable 5) With HDMI to DVI cable: Audio in Cable (not supplied) VCD or DVD Player (DVD Player should have the DVI Output terminal) HDMI-DVI Cable (not supplied) 7
Connecting to a computer Connect the VGA cable from the VGA output of your computer to the VGA terminal input of your LCD TV. Also, connect the Audio In cable (green) from the audio output of your computer to the audio input terminal (green) of your LCD TV. PC PC Audio In Cable (not supplied) VGA 15 Pin Cable (not supplied) Connecting to a computer with HDMI-DVI cable Connect the HDMI-DVI cable from the DVI output of the computer to the HDMI terminal input of your LCD TV.
BASIC OPERATION To operate your LCD TV, you may use the TV remote control or upper panel buttons to select the input source, change channels, or adjust volume. Turning on the LCD TV Before using the LCD TV: 1. Ensure all external equipment is properly connected. 2. Insert the power cord. (The power LED will light red) Power On/Off To turn the LCD TV on/off : Press the POWER button on the bottom of the cabinet or on your remote control to turn on/off the TV.
z Aspect Ratio Select Repeatedly press the WIDE key to select the image sizes between Full, Zoom1, Zoom2, Normal, or Panorama. z Freeze Picture Press the FREEZE key to freeze the picture. However, the sound still continues. Using the OSD Menu You are able to use the On Screen Display (OSD) menus to adjust various settings by using your remote control or menu buttons on the top of the LCD TV. The basic operation is as following: Press MENU to display the OSD menu.
ADVANCED OPERATION—OSD MENU / REMOTE CONTROL Picture Menu — Adjusting picture quality and status This is active in TV / AV / S-VIDEO / YPbPr / HDMI mode. When the input source is TV: When the input source is other mode: Contrast: To adjust the video contrast. Brightness: To adjust the video luminance. Color: To adjust color. Tint: To adjust tint level. Sharpness: To adjust picture sharpness. Picture Mode: To select picture mode between User, Standard, Movie, and Vivid. Color Temp.
z z z z z Sound Mode: To select the sound mode between User, Standard, Movie, and Music. Bass: To adjust the bass. (This is only available when “User” is selected in the sound mode) Treble: To adjust the treble. (This is only available when “User” is selected in the sound mode) Balance: To adjust left and right audio balance. EQ: To adjust the equalizer. Select ON to adjust the levels of different sound frequencies.
Input: Use ◄► to select the input source between TV, AV, SVIDEO, YPbPr, PC, and HDMI. Language: To select the OSD language. (English, French or Spanish) OSD Time-Out: To setup the display time on the OSD. (OFF, 15, 30, 45, and 60 seconds) Sleep: Press ◄► to set the sleep timer. There are several times to choose from: 15 min, 30 min, 45 min, 60 min, or OFF. z Closed Caption: Press ◄► to set the closed caption mode: (CC1~CC4, TEXT1~TEXT4, or OFF). z Parent Control: To set up V-Chip protection and password.
TV-G, TV-PG, TV-14, TV-MA. Use the ENTER button to block or unblock the ratings, and use MENU to exit.
Movie-Rating: To adjust the movie blocking level in the US. You can select between NONE, G, PG, PG-13, R, NC-17, X. Use the ◄► buttons to select your desired rating. G General audience R Restricted PG Parental guidance suggested NC-17 No one 17 and under limited PG-13 Parents strongly cautioned X Adult audience only English-Rating: To adjust the blocking level in Canada (excluding Quebec). You can select between E, C, C8+, G, PG, 14+, 18+. Use the ◄► buttons to select your desired rating.
PC Menu —Adjusting for PC This is only active in PC and HDMI (PC connected) mode. When the input source is PC: When the input source is HDMI (PC connected): z Auto Adjust: Use ◄► to auto adjust the picture’s horizontal position, vertical position, fine tune, and H-Size. z Contrast: To adjust the foregrounds luminance of the video. z Brightness: To adjust the backgrounds luminance of the video. z H-Position: To adjust the horizontal position of the video.
TECHNICAL SPECIFICATION LCD Type 31.51” TFT Active Matrix 0.51075(H) x 0.51075(V) mm pixel pitch Input signal Color Filter RGB vertical stripe Glass surface Anti-Glare RGB RGB analog (0.7/ 1.
SAFETY PRECAUTIONS This LCD TV is manufactured and tested to insure the user’s safety. Improper use or installation may result in danger to the user or damage to the television. Carefully go over the following WARNINGS before installation, and keep this guide handy. WARNINGS z This LCD TV should be operated only at the correct power sources indicated on the label on the rear end of the LCD TV. If you’re unsure of the power supply in your residence, consult your local dealer or Power Company.
CARE AND MAINTENANCE Care z z z z z Avoid exposing your LCD TV directly to sunlight or other sources of heat. Place your LCD TV away from the sun to reduce glare. Put your LCD TV in a well ventilated area. Do not place anything heavy on top of your LCD TV. Make certain your LCD TV is installed in a clean and moisture-free area. Keep your LCD TV away from magnets, motors, transformers, speakers, and other TV sets.
CITIZEN® WARRANTY Consumer Electronics Products and Home Appliances Thank you for choosing CITIZEN®! SYNNEX Canada Limited gives the following express warranty to the original consumer purchaser or gift recipient for this CITIZEN product, when shipped in its original container and sold or distributed in Canada by SYNNEX Canada Limited or by an Authorized CITIZEN Dealer: SYNNEX Canada Limited warrants that this product is free, under normal use and maintenance, from any defects in material and workmanship.