User manual

BASIC OPERATION

To operate your LCD TV, you may use the TV remote control or upper panel buttons to select the

input source, change channels, or adjust volume.

Turning on the LCD TV

Before using the LCD TV:

1. Ensure all external equipment is properly connected.

2. Insert the power cord. (The power LED will light red)

Power On/Off

To turn the LCD TV on/off :

Press the POWER button on the bottom of the cabinet or on your remote control to turn on/off the

TV. The power LED indicator lights green when the LCD TV is on.

Selecting the input source

Press the INPUT key and use ▲▼◄► to select the required input source between PC, HDMI, TV,

AV, SVIDEO, and YPbPr.

To confirm the selection, press ENTER.

Volume Adjust

Press + VOL - to adjust the volume.

To turn off the sound, press MUTE. To restore volume, press MUTE again, or press + VOL -.

Channel Select

Press the number keys or the ▲CH▼ keys to select the desired channels.

NOTE: The “100” number key is used for selecting channel numbers above 100.

Example: the desired channel is 8--Press 0 → press 8, or press 8 only.

Example: the desired channel is 108--Press 100 → Press 0 → press 8.

To return to the previous channel, press the RETURN key.

Sleep Time Setting

Repeatedly press the SLEEP key to set the off timer. This function is used to automatically shut off

the LCD TV after a preset period of time passes.

There are several times for choice -- 15min, 30min, 45min, and 60min.

Sound

z Sound Mode Select

Repeatedly press SOUND to select the sound mode between User, Standard, Movie, and

Music.

z MTS Select

Press the MTS key to set up the MTS system.

This function is to provide multi-channel TV sound. MTS can receive Stereo, SAP (Secondary

Audio Program), or Mono sound. SAP feature permits the TV station to broadcast other

information, such as audio in other languages.

**Choose the available sound output for channels that is preset by the TV broadcasting

station.

Video

z Picture Mode Select

Repeatedly press the PICTURE key to select picture mode between User, Standard, Movie,

and Vivid.