User manual

z Input: Use ◄► to select the input source between TV, AV, SVIDEO, YPbPr, PC, and HDMI.

z Language: To select the OSD language. (English, French or Spanish)

z OSD Time-Out: To setup the display time on the OSD. (OFF, 15, 30, 45, and 60 seconds)

z Sleep: Press ◄► to set the sleep timer. There are several times to choose from:

15 min, 30 min, 45 min, 60 min, or OFF.

z Closed Caption: Press ◄► to set the closed caption mode:

(CC1~CC4, TEXT1~TEXT4, or OFF).

z Parent Control: To set up V-Chip protection and password. V-Chip is transmitted from the TV

station to help parents monitor what their children watch. The factory default setting has V-Chip

turned off. However, setting V-Chip can block the appointed channels.

Press ► on the remote control, and the following screen will display.

To enable the V-Chip functions, please input “0000” if you have not assigned the special

password. After the password has been entered, the following screen will display.

 Change Password: To reset the 4-digit password. Enter the new password, and then enter

the password again to confirm the change.

 V-Chip: Select ON to enable the V-Chip functions.

 TV-Rating: To adjust the TV blocking level in the US. You can select between TV-Y, TV-Y7,