User`s manual

Chapter 6 Configuring Your Printer Using The Menus

−

Chapter 6

Configuring Your Printer Using the Menus

This chapter explains all the possible menu options for configuring the barcode printer. Refer to

Chapter 5 for information on the operation of the menus system and which keys perform which actions.

6.1 The Group Menu

The printer has two modes of operation: Ready mode and Menu mode. To switch between the modes,

press the

key. The Group Menu is the first level of menus after entering the Menu Mode from

Ready Mode. Each of the subsequent sections explains the individual menu options.

READY

* Page

Setu

* System

Setup

* After

* Inter-

face

* Save

Settings

* Test

Mode

Set print attributes such as print speed, print darkness,

printing method and page format. See Section 6.2

Set label detection method, sensing level, buzzer,

time/date etc. See Section 6.3

Set what action the printer performs after printing a

label, e.g. tear off, cut or peeling. See Section 6.4

Set up interface parameters for RS-232C serial

network IP address. See Section 6.5

Save changes to printer’s configuration permanently in

memory. See Section 6.6

Produce a configuration printout, test sample or

perform a head error check. See Section 6.7

SELECT

MODEMODE

Menu Mode

Ready Mode

DOWN