. Citrix® Access GatewayTM Pre-Installation Checklist Citrix Access Gateway 4.
Copyright and Trademark Notice Use of the product documented in this guide is subject to your prior acceptance of the End User License Agreement. A printable copy of the End User License Agreement is included on your product CD-ROM. Information in this document is subject to change without notice. Companies, names, and data used in examples herein are fictitious unless otherwise noted.
Access Gateway Pre-Installation Checklist Overview This document contains a checklist of the tasks and planning information you must complete before you install the Access Gateway. Space is provided so that you can check off each task as you complete it. Make note of the configuration values needed during the installation and configuration of the Access Gateway. Citrix recommends that you print and fill out this checklist before proceeding with the installation.
Access Gateway Pre-Installation Checklist Client Devices 1. Ensure client devices meet the installation prerequisites described in the Access Gateway Administrator’s Guide. On the Firewall between the Unsecured Network and the DMZ 2. Ensure port 443 (default SSL port) on the firewall is open between the Internet and the Access Gateway. Access Gateway Basic Network Connectivity 3. Access Gateway host name. This is the fully qualified domain name (FQDN). 4. Default gateway IP address. 5.
Access Gateway Pre-Installation Checklist RADIUS Authentication and Authorization 7. RADIUS Server IP address and port. 8. RADIUS Server secret. 9. Vendor-Specific Attribute. The default is RADIUS=Standard. 10. Vendor-assigned attribute number. This is the assigned number for the User Group attribute. The default is 0. 11. Attribute format. The default is String. 12. Attribute name and group. For the Access Gateway, the attribute value is CTXSUserGroups=groupname.
Access Gateway Pre-Installation Checklist 16. Base DN. DN under which users are located. For example, “ou=users, dc=ace, dc=com. 17. Logon name attribute. Defaults to “sAMAccountName.” If using other directories, you might want to set this to cn. 18. Group Info attribute. Defaults to “memberOf.” This enables the Access Gateway to obtain the groups associated with a user during authorization.
