Owner’s Manual

109
IV
R A D I O S O U R C E
Manual pre-setting
Select the waveband and memory
bank required using button E.
Select a station using either auto-
matic or manual search.
Keep pressing for more than two
seconds on one of the pre-selection
buttons 1 to 6 on the keypad P.
The sound momentarily cuts off,
then returns to its previous level to
confirm that it has memorised the
station.
Automatic memorisation
of transmitters (Autostore
function)
In FM, if you hold down button E
for more than two seconds, your
radio will automatically memorise
the 6 strongest stations on the FM3
memory bank.
The display shows “FM AST”.
The radio memorises the 6 strong-
est transmitters, deleting the 6
previously memorised.
After the memorisation, the radio
goes directly to memory 1 of memory
bank FM3.
Note :
- If the traffic information func-
tion has been activated (see
RDS SYSTEM), the stations
offering this facility will be memo-
rised as priority.
If it is unable to memorise any new
stations, the system will retain the
previously memorised stations.
- If the system is unable to find
6 stations, the unfilled memory
slots will remain free.
Recall of pre-set stations
Press button E briefly to select the
required waveband and memory
bank.
A short press on one the pre-selec-
tion buttons 1 to 6 on the keypad P
recalls the corresponding memo-
rised station. You can also do this
using the control 3 at the steering
wheel.
If it is a RDS station, the frequency
appears some seconds before the
name appears.
For RDS stations, recall of a station
may prompt a search for a fre-
quency corresponding to the region
where you happen to be (see RDS
system).