Owner’s Manual

117
IV
B L U E T O O T H ®
Swapping a call
During a telephone conversation,
the system is able to tell you of a
second call incoming. To accept it,
validate. To change from one call to
the other, select this choice.
End a call
This choice enables you to end a tel-
ephone conversation, for example if
there is another call incoming.
Secret mode
Select this choice. This allows you
not to be heard by the other person.
To restore sound to the other person,
select deactivation of Secret mode
in the menu “Call Management”.
Note :
If you wish to transfer a call from
the audio system to the mobile
telephone (for example when leav-
ing your vehicle), refer to the user
instructions for the latter.
Voice recognition
A short press on button 12 starts
voice recognition for the telephone.
Voice recognition allows you to
make a call to a number for which
you have recorded a label on the
mobile telephone that is twinned
and connected.
Remark :
It is possible to stop the call as long
as the dialling has not commenced,
by means of a short press on but-
ton 12.
Remarks :
- While you are on a call, the audio
source currently being listened
to is paused.
- Some ring tones on your mobile
telephone may not be recog-
nised by the Bluetooth® system
on your vehicle. A different ring
tone will be chosen by the sys-
tem.
Displays
A press on the “TEL” button dis-
plays the telephone information on
the right on your screen.
A “Telephone” symbol appears on
your display when you connect a
mobile telephone.
A “Battery” symbol appears at the
bottom of the display to indicate the
range of the mobile telephone con-
nected.
An “Envelope” symbol appears at
the bottom of the display to indicate
the presence of an unread SMS on
the mobile telephone connected.
A “Sound track” symbol appears at
the bottom of the display to indicate
the presence of a message on the
mobile telephone connected.