Owner’s Manual

1
4
3
2
V
131
Protection cover
Engine HDi 138
Remove the protection cover by
first unclipping point 1, then 3
and 4. Detach point 2 by pulling
towards you, then lift.
To reposition the protection cover,
attach point 2 first. Lower the
cover, keeping it centred. Clip
points 1 and 4, pushing vertically
and slightly rearwards. Clip point 3
pushing down vertically.
HDi engines are of a highly technical nature.
All maintenance and repairs require specific qualifications which
only your CITROËN Dealer can guarantee.
Bleeding of water from the
diesel fuel filter
To be bled on a regular basis (at
every oil change).
To evacuate the water, slacken the
bleed screw or the water in diesel
fuel sensor, which is located at
the base of the filter, until water
ceases to flow out.
Then retighten the bleed screw or
the water in diesel fuel sensor.
D I E S E L I N J E C T I O N E Q U I P M E N T